Option sticker on inside of glove box door - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Rg500gamma** · 01-06-2025, 02:28 PM

Being the option sticker gets beat up, if I trim the outside of the paper document will I be able to remove it without damaging it ?

**Palf70Step** · 01-06-2025, 02:41 PM

I've never been able to get them off in one piece.

**leddzepp** · 01-06-2025, 02:52 PM

You’ll ruin it if you try to remove it.

**Ironhorse** · 01-06-2025, 03:02 PM

Don't remember right off but at one time a member here who's board name escapes at the moment used to make some very nice reproduced SIPD glove box stickers. Try doing a search for some related threads. Agree with trying to remove it intact, isn't going to happen.

**LockDoc** · 01-06-2025, 03:05 PM

Quote:

Originally Posted by Ironhorse

Don't remember right off but at one time a member here who's board name escapes at the moment used to make some very nice reproduced SIPD glove box stickers. Try doing a search for some related threads. Agree with trying to remove it intact, isn't going to happen.

That would be member "Chipflyer." His web site is https://outintheshop.com

**1970cstblazer** · 01-06-2025, 03:11 PM

It's more desirable to try to keep the original SPID. If it is too illegible, then by all means replace it.

Keith Seymore · 01-06-2025, 03:24 PM

Take good pictures before you remove it.

K

**Ironhorse** · 01-06-2025, 04:37 PM

Quote:

Originally Posted by LockDoc

That would be member "Chipflyer." His web site is https://outintheshop.com

Thanks for the memory jog Leon, I was stuck in first gear and couldn't shift, LOL. I did remember "chip.....something" but the rest of it wouldn't come to me.

**Rg500gamma** · 01-06-2025, 04:42 PM

The guy I found is in Fontana Cali
I tried and it began to start to rip
I am going to try and polish the plastic and see if I can read the options
If not I am going to send the glove door and let them have at it.
I MAY try the heat gun as well

**Rg500gamma** · 01-06-2025, 04:44 PM

Vintage Correct is contact name btw

**Getter-Done** · 01-06-2025, 09:27 PM

I recommend www.Outintheshop.com also.

Top notch work.

**davischevy** · Yesterday, 11:49 PM

www.outintheshop.com is the go to for your reproduction SPID.

01-06-2025, 02:28 PM	#1
Rg500gamma Junior Member Join Date: Jul 2023 Location: Warwick ny Posts: 59	Option sticker on inside of glove box door Being the option sticker gets beat up, if I trim the outside of the paper document will I be able to remove it without damaging it ?

01-06-2025, 02:41 PM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,266	Re: Option sticker on inside of glove box door I've never been able to get them off in one piece. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

01-06-2025, 02:52 PM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,041	Re: Option sticker on inside of glove box door You’ll ruin it if you try to remove it. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

01-06-2025, 03:02 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,301	Re: Option sticker on inside of glove box door Don't remember right off but at one time a member here who's board name escapes at the moment used to make some very nice reproduced SIPD glove box stickers. Try doing a search for some related threads. Agree with trying to remove it intact, isn't going to happen. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-06-2025, 03:11 PM	#6
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,883	Re: Option sticker on inside of glove box door It's more desirable to try to keep the original SPID. If it is too illegible, then by all means replace it. __________________ 1970 K/5 Blazer CST 4WD, TOTM winner December 2024! Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

01-06-2025, 03:24 PM	#7
Keith Seymore Registered User Join Date: May 2009 Location: Motor City Posts: 9,236	Re: Option sticker on inside of glove box door Take good pictures before you remove it. K __________________ Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/

01-06-2025, 04:42 PM	#9
Rg500gamma Junior Member Join Date: Jul 2023 Location: Warwick ny Posts: 59	Re: Option sticker on inside of glove box door The guy I found is in Fontana Cali I tried and it began to start to rip I am going to try and polish the plastic and see if I can read the options If not I am going to send the glove door and let them have at it. I MAY try the heat gun as well

01-06-2025, 04:44 PM	#10
Rg500gamma Junior Member Join Date: Jul 2023 Location: Warwick ny Posts: 59	Re: Option sticker on inside of glove box door Vintage Correct is contact name btw

01-06-2025, 09:27 PM	#11
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,451	Re: Option sticker on inside of glove box door I recommend www.Outintheshop.com also. Top notch work. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

Yesterday, 11:49 PM	#12
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,866	Re: Option sticker on inside of glove box door www.outintheshop.com is the go to for your reproduction SPID. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.