Option sticker on inside of glove box door - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Rg500gamma** · 01-06-2025, 02:28 PM

Being the option sticker gets beat up, if I trim the outside of the paper document will I be able to remove it without damaging it ?

**Palf70Step** · 01-06-2025, 02:41 PM

I've never been able to get them off in one piece.

**leddzepp** · 01-06-2025, 02:52 PM

You’ll ruin it if you try to remove it.

**Ironhorse** · 01-06-2025, 03:02 PM

Don't remember right off but at one time a member here who's board name escapes at the moment used to make some very nice reproduced SIPD glove box stickers. Try doing a search for some related threads. Agree with trying to remove it intact, isn't going to happen.

**LockDoc** · 01-06-2025, 03:05 PM

Quote:

Originally Posted by Ironhorse

Don't remember right off but at one time a member here who's board name escapes at the moment used to make some very nice reproduced SIPD glove box stickers. Try doing a search for some related threads. Agree with trying to remove it intact, isn't going to happen.

That would be member "Chipflyer." His web site is https://outintheshop.com

**1970cstblazer** · 01-06-2025, 03:11 PM

It's more desirable to try to keep the original SPID. If it is too illegible, then by all means replace it.

Keith Seymore · 01-06-2025, 03:24 PM

Take good pictures before you remove it.

K

**Ironhorse** · 01-06-2025, 04:37 PM

Quote:

Originally Posted by LockDoc

That would be member "Chipflyer." His web site is https://outintheshop.com

Thanks for the memory jog Leon, I was stuck in first gear and couldn't shift, LOL. I did remember "chip.....something" but the rest of it wouldn't come to me.

**Rg500gamma** · 01-06-2025, 04:42 PM

The guy I found is in Fontana Cali
I tried and it began to start to rip
I am going to try and polish the plastic and see if I can read the options
If not I am going to send the glove door and let them have at it.
I MAY try the heat gun as well

**Rg500gamma** · 01-06-2025, 04:44 PM

Vintage Correct is contact name btw

**Getter-Done** · 01-06-2025, 09:27 PM

I recommend www.Outintheshop.com also.

Top notch work.

**davischevy** · 01-07-2025, 11:49 PM

www.outintheshop.com is the go to for your reproduction SPID.

**Rg500gamma** · 01-08-2025, 05:35 PM

Here is the pic of my original spid and I looked at the options sent back and lo and be hold he was able to decipher it with all the options I actually have on the truck.
He must use a NASA grade microscope to read mine
I'm amazed
I will add the completed sheet when I receive it

**Rg500gamma** · Today, 09:21 AM

Here is my replacement SPID
2 are provided as well as the sticker covers

**Rg500gamma** · Today, 09:24 AM

VintageCorrect
Com is the vendor.
$139

**leddzepp** · Today, 10:40 AM

There are several errors on that reproduction spid, I hope you didn’t pay for it yet.

As others have stated above, www.outintheshop.com makes perfect reproductions, I would recommend him and nobody else.

**Rg500gamma** · Today, 01:13 PM

What do you notice on spid ?

**Joesjunk** · Today, 01:22 PM

Quote:

Originally Posted by leddzepp

There are several errors on that reproduction spid, I hope you didn’t pay for it yet.

As others have stated above, www.outintheshop.com makes perfect reproductions, I would recommend him and nobody else.

I agree 100%. That spid it very incorrectly done. Jeff at out in the shop does these 100% accurately. He is the only guy to use for these. His work is top notch

**leddzepp** · Today, 01:25 PM

For starters he can’t spell gauge correctly.
It should read black vinyl trim instead of just black.
Most words on the right side are cut off.

I’m sure there are more but that’s what I see right off the bat

**Joesjunk** · Today, 01:25 PM

That new spid has missing, and incorrect descriptions and is in the wrong order. I can read most of your original one

**Steeveedee** · Today, 01:28 PM

"MEDIUM" is spelled wrong. Also, if I am not mistaken, 3/4T trucks come standard with power brakes, so I don't know if that option belongs on the SPID. "GAGE" should be spelled "GAUGE". There may be others, but those are the ones that jump out at me. There is a whole thread where many people have posted their SPIDs.

**Getter-Done** · Today, 01:54 PM

Quote:

Originally Posted by Steeveedee

"MEDIUM" is spelled wrong. Also, if I am not mistaken, 3/4T trucks come standard with power brakes, so I don't know if that option belongs on the SPID. "GAGE" should be spelled "GAUGE". There may be others, but those are the ones that jump out at me. There is a whole thread where many people have posted their SPIDs.

Yeah that thread is Currently 29 pages and Full of info.

Here's the link: https://67-72chevytrucks.com/vboard/...highlight=spid

**Rg500gamma** · Today, 02:42 PM

All the replies are great
I am glad so many have the knowledge.
I redid my 69z28 and didn't need a new spid
New ground for me

**Steeveedee** · Today, 03:13 PM

It would have been nice for the trucks to have option plates like the cars have. Riveted on, and people don't let their grandkids scribble on them.

01-06-2025, 02:28 PM	#1
Rg500gamma Junior Member Join Date: Jul 2023 Location: Warwick ny Posts: 64	Option sticker on inside of glove box door Being the option sticker gets beat up, if I trim the outside of the paper document will I be able to remove it without damaging it ?

01-06-2025, 02:41 PM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,271	Re: Option sticker on inside of glove box door I've never been able to get them off in one piece. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

01-06-2025, 02:52 PM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,052	Re: Option sticker on inside of glove box door You’ll ruin it if you try to remove it. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

01-06-2025, 03:02 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,301	Re: Option sticker on inside of glove box door Don't remember right off but at one time a member here who's board name escapes at the moment used to make some very nice reproduced SIPD glove box stickers. Try doing a search for some related threads. Agree with trying to remove it intact, isn't going to happen. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-06-2025, 03:11 PM	#6
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,904	Re: Option sticker on inside of glove box door It's more desirable to try to keep the original SPID. If it is too illegible, then by all means replace it. __________________ 1970 K/5 Blazer CST 4WD, TOTM winner December 2024! Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

01-06-2025, 03:24 PM	#7
Keith Seymore Registered User Join Date: May 2009 Location: Motor City Posts: 9,237	Re: Option sticker on inside of glove box door Take good pictures before you remove it. K __________________ Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/

01-06-2025, 04:42 PM	#9
Rg500gamma Junior Member Join Date: Jul 2023 Location: Warwick ny Posts: 64	Re: Option sticker on inside of glove box door The guy I found is in Fontana Cali I tried and it began to start to rip I am going to try and polish the plastic and see if I can read the options If not I am going to send the glove door and let them have at it. I MAY try the heat gun as well

01-06-2025, 04:44 PM	#10
Rg500gamma Junior Member Join Date: Jul 2023 Location: Warwick ny Posts: 64	Re: Option sticker on inside of glove box door Vintage Correct is contact name btw

01-06-2025, 09:27 PM	#11
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,461	Re: Option sticker on inside of glove box door I recommend www.Outintheshop.com also. Top notch work. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

01-07-2025, 11:49 PM	#12
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,866	Re: Option sticker on inside of glove box door www.outintheshop.com is the go to for your reproduction SPID. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

01-08-2025, 05:35 PM	#13
Rg500gamma Junior Member Join Date: Jul 2023 Location: Warwick ny Posts: 64	Re: Option sticker on inside of glove box door Here is the pic of my original spid and I looked at the options sent back and lo and be hold he was able to decipher it with all the options I actually have on the truck. He must use a NASA grade microscope to read mine I'm amazed I will add the completed sheet when I receive it Attached Images

Today, 09:21 AM	#14
Rg500gamma Junior Member Join Date: Jul 2023 Location: Warwick ny Posts: 64	Re: Option sticker on inside of glove box door Here is my replacement SPID 2 are provided as well as the sticker covers Attached Images

Today, 09:24 AM	#15
Rg500gamma Junior Member Join Date: Jul 2023 Location: Warwick ny Posts: 64	Re: Option sticker on inside of glove box door VintageCorrect Com is the vendor. $139

Today, 10:40 AM	#16
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,052	Re: Option sticker on inside of glove box door There are several errors on that reproduction spid, I hope you didn’t pay for it yet. As others have stated above, www.outintheshop.com makes perfect reproductions, I would recommend him and nobody else. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

Today, 01:13 PM	#17
Rg500gamma Junior Member Join Date: Jul 2023 Location: Warwick ny Posts: 64	Re: Option sticker on inside of glove box door What do you notice on spid ?



Register or Log In To remove these advertisements.

Today, 01:25 PM	#19
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,052	Re: Option sticker on inside of glove box door For starters he can’t spell gauge correctly. It should read black vinyl trim instead of just black. Most words on the right side are cut off. I’m sure there are more but that’s what I see right off the bat __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

Today, 01:25 PM	#20
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,712	Re: Option sticker on inside of glove box door That new spid has missing, and incorrect descriptions and is in the wrong order. I can read most of your original one __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

Today, 01:28 PM	#21
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,755	Re: Option sticker on inside of glove box door "MEDIUM" is spelled wrong. Also, if I am not mistaken, 3/4T trucks come standard with power brakes, so I don't know if that option belongs on the SPID. "GAGE" should be spelled "GAUGE". There may be others, but those are the ones that jump out at me. There is a whole thread where many people have posted their SPIDs. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

Today, 02:42 PM	#23
Rg500gamma Junior Member Join Date: Jul 2023 Location: Warwick ny Posts: 64	Re: Option sticker on inside of glove box door All the replies are great I am glad so many have the knowledge. I redid my 69z28 and didn't need a new spid New ground for me

Today, 03:13 PM	#24
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,755	Re: Option sticker on inside of glove box door It would have been nice for the trucks to have option plates like the cars have. Riveted on, and people don't let their grandkids scribble on them. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

Register or Log In To remove these advertisements.