Need pics 60-66 (slammed not bagged) - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

USA69Z · 03-14-2015, 09:15 AM

4 inch coils in rear and 2 inch block.. front no idea..

richards72chevy · 12-04-2017, 08:18 PM

Lots of nice rides here.

ghan · 12-10-2017, 04:31 PM

Here are a couple pics of my 66 - static 4/5 drop - no notch yet

66clow · 12-10-2017, 05:15 PM

Quote:

Originally Posted by ghan

Here are a couple pics of my 66 - static 4/5 drop - no notch yet

That's a nice one!

Fawnzie · 12-11-2017, 05:21 PM

Mine has a 7/9 drop

https://www.facebook.com/photo.php?f...type=3&theater

Sam63c10 · 12-11-2017, 06:47 PM

Bad ass!
What set up you have to run that low?

Quote:

Originally Posted by Fawnzie

Mine has a 7/9 drop

https://www.facebook.com/photo.php?f...type=3&theater

Posted via Mobile Device

Fawnzie · 12-11-2017, 07:26 PM

Quote:

Originally Posted by Sam63c10

Bad ass!
What set up you have to run that low?
Posted via Mobile Device

3" inch drop coils with a coil and a half cut. Dropped spindles for the front. The back is notched and has 5" drop coils and a 4" block

OC Short Box · 12-11-2017, 09:24 PM

Nice Fawnzie! I'd like to be that low, but can't with 20s....
Did swap to 5 lug tho

Bennett68C10 · 12-11-2017, 09:29 PM

Quote:

Originally Posted by OC Short Box

Nice Fawnzie! I'd like to be that low, but can't with 20s....
Did swap to 5 lug tho

Very nice looking truck OC Short Box

Caltro88 · 04-10-2018, 08:57 PM

Quote:

Originally Posted by Scot_Douglas

Front: 2" shaved crossmember / 2.5" drop spindles / new stock ride height springs
Rear: Tbird IRS, Eibach 600 lb/in springs

Rides pretty good.

Sorry I'm not all that knowledgeable, what is the shock height in the front and rear in terms of drop?
Posted via Mobile Device

forestb · 04-10-2018, 10:21 PM

Quote:

Originally Posted by Caltro88

Sorry I'm not all that knowledgeable, what is the shock height in the front and rear in terms of drop?
Posted via Mobile Device

It seems like this question gets asked over and over again. I think I have even asked it myself. But no one seems to know. Someone told me once why nobody answers this question but I can’t remember what they said.

LVPhotos · 04-10-2018, 10:54 PM

Break out a tape measure! No two trucks are a like. My shock mounts moved, ride height set mid shock length. I drilled the fronts where it looked right.
My rear shocks don't let the truck all way down..2" too long.

txinliner · 01-12-2025, 03:49 PM

[QUOTE=highschoolbuilder;3454498]can anyone take a guess at what mine is? it sits so low. way lower than the 6-4 and i just bought it that way. any ganders?

[/

GSP7 · 01-12-2025, 04:22 PM

https://youtu.be/q2CCqEcxm5Q?t=8

rustbucket66 · 01-13-2025, 07:32 PM

Lots of nice rides in here with just the right rake and height. At a show I like to see ride height and how it would look rolling down the road. The bagged trucks on the ground look broken to me somehow. Different strokes for different folks.

SCOTI · Yesterday, 10:12 AM

Quote:

Originally Posted by rustbucket66

Lots of nice rides in here with just the right rake and height. At a show I like to see ride height and how it would look rolling down the road. The bagged trucks on the ground look broken to me somehow. Different strokes for different folks.

Exactly.

Don't like it (bagged truck on the ground)? Move on to the ones that you do.

raidmagic · Today, 12:21 PM

Mine is static. 2 inch drop spring and spindles in front i think 6" spring in the rear, i honestly don't remember.

forestb · Today, 12:43 PM

I am surprised that I have not posted a picture of my truck on here yet. Between the drop spindles and a coil cut out of my front coil springs I think I have a 4 inch drop upfront and I have a 5 inch drop in the rear.

SCOTI · Today, 02:17 PM

Nice rides guys!

03-14-2015, 09:15 AM	#76
USA69Z Registered User Join Date: Mar 2012 Location: downunder Posts: 76	Re: Need pics 60-66 (slammed not bagged) 4 inch coils in rear and 2 inch block.. front no idea..

12-04-2017, 08:18 PM	#77
richards72chevy Registered User Join Date: Dec 2010 Location: konawa ok/oakdale Ca. Posts: 1,652	Re: Need pics 60-66 (slammed not bagged) Lots of nice rides here.

12-10-2017, 04:31 PM	#78
ghan Registered User Join Date: Oct 2013 Location: vermilion Alberta Posts: 38	Re: Need pics 60-66 (slammed not bagged) Here are a couple pics of my 66 - static 4/5 drop - no notch yet Attached Images

12-11-2017, 05:21 PM	#80
Fawnzie Registered User Join Date: Sep 2017 Location: Los Angeles, CA Posts: 57	Re: Need pics 60-66 (slammed not bagged) Mine has a 7/9 drop https://www.facebook.com/photo.php?f...type=3&theater

12-11-2017, 09:24 PM	#83
OC Short Box Registered User Join Date: Jun 2010 Location: Orange County California Posts: 10	Re: Need pics 60-66 (slammed not bagged) Nice Fawnzie! I'd like to be that low, but can't with 20s.... Did swap to 5 lug tho Attached Images

04-10-2018, 10:54 PM	#87
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: Need pics 60-66 (slammed not bagged) Break out a tape measure! No two trucks are a like. My shock mounts moved, ride height set mid shock length. I drilled the fronts where it looked right. My rear shocks don't let the truck all way down..2" too long. __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

01-12-2025, 03:49 PM	#88
txinliner Registered User Join Date: May 2008 Location: tyler texas Posts: 97	Re: Need pics 60-66 (slammed not bagged) [QUOTE=highschoolbuilder;3454498]can anyone take a guess at what mine is? it sits so low. way lower than the 6-4 and i just bought it that way. any ganders?[/ __________________ 65c10 43,000 original miles ,230 stovebolt,powerglide,3" drop spidles 3" drop springs w/ half coil cut and 5 drop springs in back with 1 1/2 blocks... c notch soon to add hei offy 4 v intake and holley 390

01-12-2025, 04:22 PM	#89
GSP7 Registered User Join Date: Sep 2012 Location: Idaho Posts: 673	Re: Need pics 60-66 (slammed not bagged) https://youtu.be/q2CCqEcxm5Q?t=8 __________________ '81 K20 Silverado , '99 Dodge Cummins 4x4, '05 Dodge Cummins 4x4, Pinstriping-Lettering-Specialty Painting

01-13-2025, 07:32 PM	#90
rustbucket66 Registered User Join Date: Dec 2010 Location: Strathmore, Alberta Posts: 471	Re: Need pics 60-66 (slammed not bagged) Lots of nice rides in here with just the right rake and height. At a show I like to see ride height and how it would look rolling down the road. The bagged trucks on the ground look broken to me somehow. Different strokes for different folks.

Today, 12:21 PM	#92
raidmagic Registered User Join Date: Jan 2015 Location: Tampa, Fl. Posts: 429	Re: Need pics 60-66 (slammed not bagged) Mine is static. 2 inch drop spring and spindles in front i think 6" spring in the rear, i honestly don't remember. __________________ 1965 C-10 1/2 ton shortbed part time daily driver 1980 C-10 1/2 ton shortbed project

Today, 12:43 PM	#93
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,625	Re: Need pics 60-66 (slammed not bagged) I am surprised that I have not posted a picture of my truck on here yet. Between the drop spindles and a coil cut out of my front coil springs I think I have a 4 inch drop upfront and I have a 5 inch drop in the rear. Attached Images

Today, 02:17 PM	#94
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,089	Re: Need pics 60-66 (slammed not bagged) Nice rides guys! __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.