|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-24-2025, 11:08 AM
|
#1 |
|
Registered User
Join Date: Jan 2025
Location: Ft. Lauderdale, FL
Posts: 1
|
Wheel Clearance question for 52 GMC 100
Would 16" wheels off a 2002 Suburban clear the hubs and tie rods on a stock 52 GMC 100?
Are the hub size differences going to cause issues as well? Thanks. ps I believe they are 16x6.5 +31 offset with 245/75/16 tires. |
|
|
|
Yesterday, 11:31 PM
|
#2 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,742
|
Re: Wheel Clearance question for 52 GMC 100
The should if the center fits the 52 hub. I'd try one on the truck before I laid out any money though.
1/25/25 8:18 pm One more issue that I just thought of The 2002 Burb wheels require buldge seal lug nuts. You will have to buy a set of 7/16 Bulge seal lugnuts (the ones from the burb are 14mm to mount them safely. I'm having computer issues and can't upload the image of the stock lug nut for comparison.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. Last edited by mr48chev; Today at 04:47 AM. |
|
|
|
|
Today, 04:48 AM
|
#3 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,742
|
Re: Wheel Clearance question for 52 GMC 100
This is the stock 52 1/2 ton GMC lug nut for comparison.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
