Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-01-2025, 10:50 PM | #1 |
Registered User
Join Date: May 2004
Location: Ontario Canada
Posts: 166
|
68 C10 LS rad hoses suggestions
Hey all.
I have a 68 C10 with a 5.3 LS with a dual pass rad, and need some suggestions for upper and lower rad hoses. Thanks. Last edited by GMJimmy; Yesterday at 01:09 PM. |
Yesterday, 05:11 PM | #2 |
Registered User
Join Date: Jun 2015
Location: Carlos MN
Posts: 2,171
|
Re: 68 C10 air intake suggestions
I typically make a wire pattern for both the top and bottom hoses and visit the local parts houses. They let me pic thru the hoses in the stock room. I've had the best luck with Oreillys. You may have to trim them a bit to get them fit correctly.
|
Yesterday, 07:30 PM | #3 |
Registered User
Join Date: May 2004
Location: Ontario Canada
Posts: 166
|
Re: 68 C10 air intake suggestions
Thanks for the reply. I like the idea but need to find a store that stocks hoses. Most stores order from a warehouse. We have several auto parts stores up here but no O'reillys. Gotta fine a store that will let me look at what they have.
|
Today, 04:04 AM | #4 |
Senior Member
Join Date: Dec 1999
Location: Southern California
Posts: 2,922
|
Re: 68 C10 air intake suggestions
Puzzled to see post about rad hoses with the air intake title? My air intake mockup is noted in build thread. An air box will be built to draw air from in front of core support. Used rad hoses from the Camaro engine came out of with some couplers for the rad. Also can be seen in my thread.
__________________
Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746 |
Today, 02:02 PM | #5 |
Registered User
Join Date: Mar 2022
Location: Surrey BC
Posts: 939
|
Re: 68 C10 air intake suggestions
Lots of variables on a swap, fans. shroud, accessories
Factory hoses from a LS powered truck (early 200* years) and a couple of these couplers will give you lots of options for shortening and changing angles. with steam vent (many swaps seem to ignore the importance of steam vent!) https://www.amazon.ca/gp/product/B0BKRS2GPN/ without vent https://www.amazon.ca/gp/product/B09FJKPZ4X The last hose suggested in this thread may also be useful for pass upper https://67-72chevytrucks.com/vboard/...d.php?t=856005 if your bends don't need to be too extreme you might also get away with ordering one of those universal hoses with the spring inside in the right length. |
Today, 05:14 PM | #6 |
Registered User
Join Date: Jun 2015
Location: Carlos MN
Posts: 2,171
|
Re: 68 C10 air intake suggestions
With your dual pass rad on which side of the car are the inlet and outlet?
What are you running for front accessories? Pics? |
Bookmarks |
|
|