![]() |
![]() |
#1 |
Registered User
Join Date: Oct 2008
Location: Austin, TX
Posts: 86
|
Towing & Trans Cooler
Working on redoing the cooling system on my 70 c1500. New radiator and water pump but thinking of doing a transmission cooler as well. Currently it’s a 350/350 but hoping to do a 400/4l80e to be able to tow my 55 Chevy and boat.
Wondering what’s a good transmission cooler to install. Prefer stacked design as it seems like a better idea especially being in Texas |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jun 2015
Location: Carlos MN
Posts: 2,183
|
Re: Towing & Trans Cooler
On my LS/4L60E swap combos I always use a B&M stacked plate trans coolers.
Pic of my current project 80 Camaro with a LS3/4L60E swap. I use -6 SS for cooler lines. The cooler has NPT inlets and outlets so I can adapt the -6 lines. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2008
Location: Austin, TX
Posts: 86
|
Re: Towing & Trans Cooler
Thanks for the info. By chance do you have a model number for the b&m?
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2021
Location: Tioga Pennsylvania
Posts: 36
|
Re: Towing & Trans Cooler
I used the Derale 40 Row stacked plate cooler (54006) with the -6an fittings on a k30 Squarebody with a built 700r4. 67,000 BTU rating, it was one of the biggest ones I could find.
Pricey but definitely worth it in my opinion, I originally had a Hayden 689 which when warm out and towing or climbing the hill to my house the transmission temps would get pretty high. After switching to the Derale I never remotely had an issue. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jun 2015
Location: Carlos MN
Posts: 2,183
|
Re: Towing & Trans Cooler
No part number but I just measured it. It's about 11" wide and about 10" tall
|
![]() |
![]() |
![]() |
#6 |
Active Member
![]() Join Date: Aug 2004
Location: Sacramento Ca
Posts: 137
|
Re: Towing & Trans Cooler
I use the B&M Hi-Tek cooler with a fan
They make 2 sizes. I like the auto on at 170 degrees too. They are not cheap, but way cheaper than a trans rebuild. I see that others are making something similar. This keeps my trans cool. If it starts to heat up, I just flip the switch from auto to on. Jegs makes there own part number 555-60389 Summit racing makes one too. I installed the smaller one due to space concerns. Last edited by binford; Today at 06:19 PM. |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Dec 2022
Location: Redcliff, Alberta
Posts: 233
|
Re: Towing & Trans Cooler
I always see two options offered up every time for the 4L80e:
1. Grab a transmission cooler from a Ford F-250/350 (They are HUGE) 2. Tru-Cool 40K transmission cooler.
__________________
"If it ain't broken, fix it 'till it is!" |
![]() |
![]() |
![]() |
Bookmarks |
|
|