OR F/S GM NOS & New Repro Steering Column Replacement Parts

[A1971Blazer]

Originally Posted by Classic Bowties

We are adding the below pictured New Repro tilt column shift lever and knob setup for member A1971Blazer per his recent inquiry, am giving him first option/right of refusal on the two below parts, these items will be available to anyone interested should he pass. Thanks, Mel


New Repro 70-72 tilt steering column shift lever (short style) and knob set. $45. + $12. for CONUS shipment

.

I will take it, thanks
PM replied for payment info

[Classic Bowties]

Originally Posted by A1971Blazer

I will take it, thanks
PM replied for payment info

The New Repro 70-72 tilt steering column shift lever (short style) and knob setup has been shipped off, your package went out via USPS ground advantage on Thu. 01/23 and the expected delivery day is Wed. 01/29. Thanks again for your order and let me know if we can help with any other 67-72 parts needs. Mel

[A1971Blazer]

I received the lever and knob from Mel @ Classis Bowties, and was able to get it installed yesterday
It looks much better with the shorter lever along with the 15" steering wheel.
Before and after as well as side by side comparison.

[Classic Bowties]

Originally Posted by A1971Blazer

I received the lever and knob from Mel @ Classis Bowties, and was able to get it installed yesterday
It looks much better with the shorter lever along with the 15" steering wheel.
Before and after as well as side by side comparison.

That new repro short style tilt column shift lever looks and goes great with the smaller diameter cushion grip sport wheel, thanks for the update and again for taking the time to share your installed before/after comparison pics. Let me know if we can help with any other steering column parts needs. Mel

[Dude68]

Posting my need for parts.

1968 c/10 with 250 three speed on column.

Need 4 of each upper control rod to column shift tube grommets #1 on diagram and inner steel shift bushing x2.
Need 4 lower control rod to 3 speed manual shift lever grommets, # 2 on diagram.

I am also on need of a water pump pulley and a non a/c battery tray if they are less than I can get elsewhere.

[Dude68]

Got a pulley and battery tray, just need these other parts.

[Classic Bowties]

Originally Posted by Dude68

Posting my need for parts.

1968 c/10 with 250 three speed on column.

Need 4 of each upper control rod to column shift tube grommets #1 on diagram and inner steel shift bushing x2.
Need 4 lower control rod to 3 speed manual shift lever grommets, # 2 on diagram.

I am also on need of a water pump pulley and a non a/c battery tray if they are less than I can get elsewhere.

Originally Posted by Dude68

Got a pulley and battery tray, just need these other parts.

Okay, for figuring up your combined total please confirm the total grommet and steel bushing quantity wanted (you mention four of each in above reply and then two of each in your sent pm), the #14 upper and #15 lower GM NOS shift rod grommet pricing is listed in the top post of this f/s thread along with several different payment options, confirm your preferred method for sending funds and we'll get the info and your combined total returned. Thanks, Mel

[Dude68]

I have ordered some different bushings and grommets. I’m gonna see if they work. If not I will repost order here, thanks.

[Dude68]

I will need two each of number 1 and number 2 as well as 4 of the inner steel bushings. I also need one each of the circled parts for upper shift rod. I have also attached a pic of the under dash parts that go inside the circle on the clutch rod. It is being held in place with a cotter pin. Do you have these?