TX WTB - 1971 Short Pump Pulley Set - SBC

[Mr.M]

Looking for crank, water pump pulleys for a 71 C10 with a/c - short pump pulleys.

[Accelo]

I have the 043 BA inner crank pulley
I know it is correct for a 72, you need to confirm the 71 application
It has been blasted and powder-coated. $50

I may have the other, still looking.

[Mr.M]

Originally Posted by Accelo

I have the 043 BA inner crank pulley
I know it is correct for a 72, you need to confirm the 71 application
It has been blasted and powder-coated. $50

I may have the other, still looking.

Appreciate the pics/pn #'s.
I'm going to try and source locally tomorrow, I found a donor truck with a short pump. Hopefully I'll have better luck than I did with someone on the west coast. If I'm unsuccessful, I'll see if these are the ones. Thanks..

[Classic Bowties]

Originally Posted by Mr.M

Looking for crank, water pump pulleys for a 71 C10 with a/c - short pump pulleys.

Mr.M, picking up from our back and fourth communication over the past few days, here are some pics of the correct OE used short water pump 1971 SB 350 with A/C and P/S application pulleys and alternator bracket set. If your above mentioned recently found local donor truck doesn't have the needed parts, we can get the below pictured upper two groove w/p pulley 646AH, lower two groove inner crank pulley 043BA, lower single groove outer crank pulley 232BB and the 2 pc. alternator bracket set headed you way. As mentioned in a couple of previous pm's, this add on outer 232BB crank pulley for driving the p/s pump only pairs up and goes with the single groove p/s pump pulley 325DJ, again our 232BB outer crank pulley will NOT match/line up with the later style long water pump two groove p/s pump pulley that you sent us pictures of. Will offer the pulleys at $45. ea., the two pc. alternator bracket set for $75. and $20. on the combined shipment to you in TX., if interested online funds can be sent via Zelle and CashApp, Credit/Debit Card over the phone or Check/Money Order by mail. Let us know, Mel
.

[Mr.M]

Originally Posted by Classic Bowties

Mr.M, picking up from our back and fourth communication over the past few days, here are some pics of the correct OE used short water pump 1971 SB 350 with A/C and P/S application pulleys and alternator bracket set. If your above mentioned recently found local donor truck doesn't have the needed parts, we can get the below pictured upper two groove w/p pulley 646AH, lower two groove inner crank pulley 043BA, lower single groove outer crank pulley 232BB and the 2 pc. alternator bracket set headed you way. As mentioned in a couple of previous pm's, this add on outer 232BB crank pulley for driving the p/s pump only pairs up and goes with the single groove p/s pump pulley 325DJ, again our 232BB outer crank pulley will NOT match/line up with the later style long water pump two groove p/s pump pulley that you sent us pictures of. Will offer the pulleys at $45. ea., the two pc. alternator bracket set for $75. and $20. on the combined shipment to you in TX., if interested online funds can be sent via Zelle and CashApp, Credit/Debit Card over the phone or Check/Money Order by mail. Let us know, Mel
.

Appreciate that Mel, I dropped you a text also. Donor truck run was successful - even had the belts still on with p/N#s.. Yay!! no measuring and sizing belts either. I've grown to hate GM pulleys now, but am glad it wasn't a big block..

[Classic Bowties]

Originally Posted by Mr.M

Appreciate that Mel, I dropped you a text also. Donor truck run was successful - even had the belts still on with p/N#s.. Yay!! no measuring and sizing belts either. I've grown to hate GM pulleys now, but am glad it wasn't a big block..

Thanks for confirming and congrats on locating the needed parts locally, we will go ahead and get our above pictured 71 SBC parts listed f/s since they are pulled out and sitting bench top. Let me know if we can help with any other 67-72 parts needs, Mel