KS LWB K10 Rear Drive Shaft F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 04-20-2013, 06:30 PM

Pulled this from my '71 1/2 ton long bed 4x4 with sm465/np205 set-up. Had to change drive shaft length due to swapping to a 350TH/np205. Ran fine, with a new slip shaft, stub shaft at front end and u-joints, about 3,500 miles since work was done. All work and re-balance was done by PowerDrive 4x4 in Wichita, Ks. A good plug-n-play 1/2 ton long bed 4x4 rear shaft. Measures 59 1/2'' center to center on u-joints. $75 plus shipping, money order only, no Paypal account.

**Ironhorse** · 04-25-2013, 11:35 PM

bump ttt

**pjmoreland** · Today, 03:40 AM

This is a real stretch, but do you by any chance still have this?

**Ironhorse** · Today, 11:27 AM

Quote:

Originally Posted by pjmoreland

This is a real stretch, but do you by any chance still have this?

Patrick, sorry but do not have that drive shaft any longer. No responses to that thread at that time. Later that fall I re-listed it and it sold rather quickly (?). Funny how that works some times. Sorry, can't help with a drive shaft.

**pjmoreland** · Today, 11:32 AM

It would have been surprising if you still had it, but figured it was worth a try.

04-20-2013, 06:30 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,325	LWB K10 Rear Drive Shaft F/S Pulled this from my '71 1/2 ton long bed 4x4 with sm465/np205 set-up. Had to change drive shaft length due to swapping to a 350TH/np205. Ran fine, with a new slip shaft, stub shaft at front end and u-joints, about 3,500 miles since work was done. All work and re-balance was done by PowerDrive 4x4 in Wichita, Ks. A good plug-n-play 1/2 ton long bed 4x4 rear shaft. Measures 59 1/2'' center to center on u-joints. $75 plus shipping, money order only, no Paypal account. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

04-25-2013, 11:35 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,325	Re: LWB K10 Rear Drive Shaft F/S bump ttt __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

Today, 03:40 AM	#3
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,192	Re: LWB K10 Rear Drive Shaft F/S This is a real stretch, but do you by any chance still have this?

Today, 11:32 AM	#5
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,192	Re: LWB K10 Rear Drive Shaft F/S It would have been surprising if you still had it, but figured it was worth a try.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.