CA Gauge Cluster Decals for 5000, 8000 RPM Tach, Vac, KPH, MPH, Trans Temp, Boost, etc.

[pjmoreland]

Originally Posted by 1967GMCC20

Are the repo tachs at Summit any good?

I haven't used one, but they're probably the same as the tachs all the other vendors sell.

[1967GMCC20]

Originally Posted by pjmoreland

I haven't used one, but they're probably the same as the tachs all the other vendors sell.

I will check one at next time to Summit.
Maybe I can update Tach, Vac at same time.

[pjmoreland]

Originally Posted by 1967GMCC20

I will check one at next time to Summit.
Maybe I can update Tach, Vac at same time.

If you are wanting to install tach and vac in a standard gauge cluster that didn't have them originally, then you will need the following additional components:

1) Front and back tins (the main metal housing pieces for the gauge cluster). Member 70shortfleet can modify your existing tins for you.
https://67-72chevytrucks.com/vboard/...d.php?t=792563

2) Lens - You can modify your existing lens with the decals I sell

3) Flexible circuit board

4) Tach wiring harness

Those last two items can likely be purchased from Summit, too.

[D-n-Tyke]

Interested in one of the 8000 RPM templates if you still have one. Let me know how to get you payment

[pjmoreland]

Originally Posted by D-n-Tyke

Interested in one of the 8000 RPM templates if you still have one. Let me know how to get you payment

Sending PM

[pjmoreland]

I have this BATTERY decal available now. It is the stock style. The purpose is to repair damaged text on a factory lens.

[Getter-Done]

Originally Posted by pjmoreland

I have this BATTERY decal available now. It is the stock style. The purpose is to repair damaged text on a factory lens.

That is Amazing.

I was carefully packing up some newly acquired dash pieces.
From the Swap meet this past weekend.

I thought of your work you have done to make these prints.

I need to take inventory of what I have.
Then I will get with you to see if I can fix and Re-Purpose some of the lenses I have.

[pjmoreland]

Originally Posted by Getter-Done

That is Amazing.

I was carefully packing up some newly acquired dash pieces.
From the Swap meet this past weekend.

I thought of your work you have done to make these prints.

I need to take inventory of what I have.
Then I will get with you to see if I can fix and Re-Purpose some of the lenses I have.

Sounds good! I suppose eventually I need to make decals for all of the stock text.

[pjmoreland]

Standard speedometer decals are now available as well for repairing damaged text.