Who had Barn Door pics?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMCjunkie · 07-20-2004, 06:45 AM

Who had the detailed pics of installed Burb Barn Doors?? I saved the pics from the post, but lost them via computer virus... REALLY hoping to keep moving along with my barn door swap. ANY and ALL detailed info is MUCHO appreciated!!!

sub4rvr · 07-23-2004, 12:41 PM

Hope these aren't too late. Let me know if you different or bigger pics. Good luck!

GMCjunkie · 07-24-2004, 06:31 AM

THANK YOU!! THANK YOU!! THANK YOU!! Not too late at all!!! ... Thoes pics are PERFECT!! I will put them in their own file this time!!! Thanks again!!

The Joker · 07-24-2004, 11:28 AM

Those are good pictures. In converting my tail gate to barn doors, I have to cut the top center out on barn doors, as the stricker plate is not mated for the tail gate.

GMCjunkie · 07-24-2004, 07:40 PM

Joker... Im not sure what you mean... Is this something that I will have to do also?? Are there any other mods Ill have to make to fit the barn doors on?
Thanks,
junk

The Joker · 07-24-2004, 09:32 PM

I am trying to convert one sub with a tail gate to barn doors. Most of the holes and indentations are there for the doors, except the striker plate on top in the middle that holds the drivers side back barn door shut. So I am going to have to cut one out of another sub and weld it in. It is shown in the first picture of sub4rvr. I couldn't find the other post about the doors either.

GMCjunkie · 07-25-2004, 07:40 AM

http://67-72chevytrucks.com/vboard/s...d.php3?t=76738

I found the old post about the barn doors, its on the "pictures" board, heres the link, prolly wont work cause I dont know how to post thoes

GMCjunkie · 07-25-2004, 07:43 AM

Wow!! it DID work.... I never cease to amaze myself...

Dan72cst · 07-27-2004, 02:04 PM

Jodi, you crack me up. Glad you found the old post on the picture board. And of course we will need to see pic's of yours when your ready.

Joe67 · 07-29-2004, 07:54 AM

I can take additional pics of '67 barn doors on my panel if anyone needs them

GMCjunkie · 08-03-2004, 10:17 AM

Hmmm, Im not really seeing what youre talking about having to "cut from another burb and weld" for the barn doors to work. Can anyone enlighten me?? I dont want any surprises to delay me , once I get these doors ready to switch. Thanks, Junk

The Joker · 08-04-2004, 09:12 PM

GMC Junkie
In the first picture that sub4rvr posted there is a catch for the driver side barn door in the rear. It has 4 bolts that hold it in place and it is adjustable by loosening those bolts for that barn door. Well those 4 bolts have nuts up inside the roof and the only way I can see to put those nuts in there is by cutting that peice out and then welding it back in with the nuts. I tried going in through the roof but there is not enough room. Those nuts are mounted in a saddle and tack welded from the factory,that holds the bolds in place. It will be a little while before I can post some pics to show you what i am talking about.
Joker

sub4rvr · 08-05-2004, 11:42 PM

Quote:

Originally Posted by The Joker

GMC Junkie
In the first picture that sub4rvr posted there is a catch for the driver side barn door in the rear. It has 4 bolts that hold it in place and it is adjustable by loosening those bolts for that barn door. Well those 4 bolts have nuts up inside the roof

What about the two catches for the bottom of the doors? Are the holes and nuts there on a truck that came with a tailgate? Just curious.

The Joker · 08-05-2004, 11:49 PM

No there are no holes for the bottom ones either, a person has to cut slotted holes and then weld the nut holder with the nuts. This can be done fairly easy as it is easy to get to. But the top one is a bugger.

olblue60@aol.com · 08-29-2004, 03:24 PM

Hi
I think that awhile ago, weren't you looking to find out what the GMC script looked like on a pair of barn doors? I just spotted a set on Ebay. "Parts and Accessories" section,under "1967 Suburban". Still looking? They are on the back of the yellow parts truck.

John

07-20-2004, 06:45 AM	#1
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Who had Barn Door pics?? Who had the detailed pics of installed Burb Barn Doors?? I saved the pics from the post, but lost them via computer virus... REALLY hoping to keep moving along with my barn door swap. ANY and ALL detailed info is MUCHO appreciated!!! __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

07-23-2004, 12:41 PM	#2
sub4rvr Registered User Join Date: May 2000 Location: Palm Springs, Ca. Posts: 574	Hope these aren't too late. Let me know if you different or bigger pics. Good luck! Attached Images __________________ 72 C10 Suburban 90 S10 57 F100 (2) 67 Mustang (2) 69 Torino GT 00 Mustang GT Conv.

07-24-2004, 06:31 AM	#3
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	THANK YOU!! THANK YOU!! THANK YOU!! Not too late at all!!! ... Thoes pics are PERFECT!! I will put them in their own file this time!!! Thanks again!! __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

07-24-2004, 11:28 AM	#4
The Joker Registered User Join Date: Dec 2002 Location: north cheyenne Posts: 30	catch Those are good pictures. In converting my tail gate to barn doors, I have to cut the top center out on barn doors, as the stricker plate is not mated for the tail gate. __________________ The Joker

07-24-2004, 07:40 PM	#5
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Joker... Im not sure what you mean... Is this something that I will have to do also?? Are there any other mods Ill have to make to fit the barn doors on? Thanks, junk __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

07-24-2004, 09:32 PM	#6
The Joker Registered User Join Date: Dec 2002 Location: north cheyenne Posts: 30	gate I am trying to convert one sub with a tail gate to barn doors. Most of the holes and indentations are there for the doors, except the striker plate on top in the middle that holds the drivers side back barn door shut. So I am going to have to cut one out of another sub and weld it in. It is shown in the first picture of sub4rvr. I couldn't find the other post about the doors either. __________________ The Joker Last edited by The Joker; 07-24-2004 at 09:39 PM.

07-25-2004, 07:40 AM	#7
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	http://67-72chevytrucks.com/vboard/s...d.php3?t=76738 I found the old post about the barn doors, its on the "pictures" board, heres the link, prolly wont work cause I dont know how to post thoes __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

07-25-2004, 07:43 AM	#8
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Wow!! it DID work.... I never cease to amaze myself... __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

07-27-2004, 02:04 PM	#9
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	Jodi, you crack me up. Glad you found the old post on the picture board. And of course we will need to see pic's of yours when your ready. __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400

07-29-2004, 07:54 AM	#10
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	I can take additional pics of '67 barn doors on my panel if anyone needs them __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

08-03-2004, 10:17 AM	#11
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Hmmm, Im not really seeing what youre talking about having to "cut from another burb and weld" for the barn doors to work. Can anyone enlighten me?? I dont want any surprises to delay me , once I get these doors ready to switch. Thanks, Junk __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

08-04-2004, 09:12 PM	#12
The Joker Registered User Join Date: Dec 2002 Location: north cheyenne Posts: 30	latch GMC Junkie In the first picture that sub4rvr posted there is a catch for the driver side barn door in the rear. It has 4 bolts that hold it in place and it is adjustable by loosening those bolts for that barn door. Well those 4 bolts have nuts up inside the roof and the only way I can see to put those nuts in there is by cutting that peice out and then welding it back in with the nuts. I tried going in through the roof but there is not enough room. Those nuts are mounted in a saddle and tack welded from the factory,that holds the bolds in place. It will be a little while before I can post some pics to show you what i am talking about. Joker __________________ The Joker

08-05-2004, 11:49 PM	#14
The Joker Registered User Join Date: Dec 2002 Location: north cheyenne Posts: 30	holes No there are no holes for the bottom ones either, a person has to cut slotted holes and then weld the nut holder with the nuts. This can be done fairly easy as it is easy to get to. But the top one is a bugger. __________________ The Joker

08-29-2004, 03:24 PM	#15
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Hi I think that awhile ago, weren't you looking to find out what the GMC script looked like on a pair of barn doors? I just spotted a set on Ebay. "Parts and Accessories" section,under "1967 Suburban". Still looking? They are on the back of the yellow parts truck. John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide Last edited by olblue60@aol.com; 08-29-2004 at 03:28 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.