|
08-25-2004, 10:32 PM
|
#1 |
|
Registered User
Join Date: Dec 2001
Location: NW Iowa
Posts: 952
|
Parted out '67 CST
I just parted out a '67 CST. Grill is excellent except for a couple little dings in the stainless outline bars. What is the value of a decent grill? I have lots of other parts I saved including all knobs and connections such as choke cable. I removed the uncut dash to save it. Steering wheel is good except for those cracks that are always close to the hub. I have heater controls and cables. Any interest in helping me establish value or do I just go to e-bay to see what I can get? Thanks for any help.
|
|
|
|
08-25-2004, 10:34 PM
|
#2 |
|
Senior Member
Join Date: Feb 2004
Location: Ponca city now kingfisher Oklahoma
Posts: 1,221
|
How did you cut the whole dash out? I am interested in doing that swap? Is it all welded or partly bolted in?
|
|
|
|
|
08-25-2004, 10:35 PM
|
#3 |
|
Fixing my 67, & loving it
Join Date: Jun 2004
Location: Bridge City, Texas
Posts: 524
|
I would be interested in the choke cable and knob, but I don't know what it is worth.
__________________
Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed 
|
|
|
|
|
08-25-2004, 11:01 PM
|
#4 |
|
Registered User
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,501
|
From what I have seen lately, I'd say the grill is worth $75 to $100.
__________________
Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com |
|
|
|
|
08-25-2004, 11:07 PM
|
#5 |
|
Registered User
Join Date: Dec 2001
Location: NW Iowa
Posts: 952
|
To remove dash the windshield has to be taken out. At the pinch weld at the lower edge of the windshield there are about 25 or so spot welds that have to be drilled out and then there are three bolts at each end of the dash that bolt to the cab. It took about 45 minutes to remove the front glass and drill out spot welds. The way guys talk about butchered dashes I would think a virgin would be worth something.
|
|
|
|
|
08-25-2004, 11:25 PM
|
#6 |
|
Registered User
Join Date: Jan 2001
Location: Lincoln, Nebraska
Posts: 2,145
|
What type of steering column, automatic? I need a good position indicator and the light wire to the dash. Also how is the steering wheel center cap and the vinyl door panel color and condition?
Mark
__________________
'66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed" |
|
|
|
|
08-25-2004, 11:30 PM
|
#7 |
|
Registered User
Join Date: Dec 2001
Location: NW Iowa
Posts: 952
|
It was a three on the tree. I did save the wheel center cap, but it's slightly faded. Door panels not good and what can be used I need.
|
|
|
|
|
08-26-2004, 03:40 PM
|
#8 |
|
Account Suspended
Join Date: Apr 2003
Location: Crown Point,IN
Posts: 257
|
Does it still have '67 chrome vent windows?
I would be interested in the vent windows. Are they original '67 chrome vent windows? If so,do you have any pictures? Please let me know. Thanks
|
|
|
|
|
08-26-2004, 03:50 PM
|
#9 |
|
Resident Curmudgeon
 
Join Date: Dec 1999
Location: NH
Posts: 6,664
|
And I was waiting for you to reply to me on Piston's board regarding knobs and horn button, etc (going back several week s now). Am I still first in line for these items? If so shoot me a price.
Link to post on MOT 
__________________
Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter  Maybe I need to sell some of this crap  Yet another Bozo with a sawz-all Last edited by CPNE; 08-26-2004 at 03:57 PM. |
|
|
|
|
08-26-2004, 11:08 PM
|
#10 |
|
Registered User
Join Date: Dec 2001
Location: NW Iowa
Posts: 952
|
Sorry, CPNE. I thought you were just suggesting I save these items because they are of some value. I did not realize you wanted them. I am clueless as to their value. I'm going to have to trust you to make an offer. These small items will not be an issue to send to NH. Is it choke cable, light switch, and washer/wiper knob you want? And horn button? Lighter was missing. Let me know. If you want them to re-sell, I appreciate that, but I would keep them for myself if that's the case. If you need them for a project of your own I will help you out.
|
|
|
|
|
08-27-2004, 10:43 PM
|
#11 |
|
Registered User
Join Date: Dec 2001
Location: NW Iowa
Posts: 952
|
CPNE, are you there?
|
|
|
|
|
08-27-2004, 11:38 PM
|
#12 |
|
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
Im clueless to how the cst horn button is different in the 67. But im making my 67 a cst and if cpne doesnt want the horn button and you wouldnt mind posting a pic and if i dont have it i would buy it. Thanks JT
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
|
|
|
|
08-28-2004, 07:52 AM
|
#13 | |
|
Resident Curmudgeon
Join Date: Dec 1999
Location: NH
Posts: 6,664
|
Quote:
__________________
Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all |
|
|
|
|
|
08-28-2004, 11:43 AM
|
#14 |
|
Truck Farmer
Join Date: Nov 2001
Location: Lake Havasu City, Arizona
Posts: 1,192
|
I need one CST outer door emblem if you have one in nice shape.
__________________
Arizona rust free sheetmetal |
|
|
|
|
08-28-2004, 11:03 PM
|
#15 |
|
Active Member
 Join Date: Oct 2002
Location: Ft. Myers, Fl
Posts: 1,716
|
67 cst
It should have bucket seats.
If so can you send pics? Or tell their condition,and price? |
|
|
|
|
08-30-2004, 04:09 AM
|
#16 |
|
Senior Member
Join Date: Nov 2001
Location: Rapid City, SD
Posts: 2,281
|
How far from Sioux Falls, SD are you? and I am interested. Do you have a list of whats all there? Will you eventually have pic's? Why are you parting it out? E-mail me at YNELSON@rushmore.com
__________________
My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
