Cpp modular spindle steering stops

[ullose272]

Originally Posted by HalfBrit

IÂ’ll check tomorrow. Since my body and inner fenders havenÂ’t been installed since I did my chassis work, I have no way of knowing if the stops are going to be the correct length. Regardless, make sure thread depth through the spindle doesnÂ’t contact the brake disc.

I used 2 1/2 bolt and a nut for a jam nut. The wheel comes real close to the shock i may need to go to a 3" and thread it in some more or cut the 3" to about 2 3/4. Ill see when i go drive it