|
08-31-2004, 12:59 PM
|
#1 |
|
Registered User
Join Date: Feb 2004
Location: TONEY ALA
Posts: 307
|
Power Windows Help
In My 88 Chev The Power Window On The Right Side Quit Working And Same Time Both Door Locks Stop ,but Driver Side Window Is Ok.will The Hold Panel Have To Come Off The Door To Have A Look At These Switchs Are Just The Part Around The Door Latch I Need Some Input I Never Mess With These Before. Thanks Steve
__________________
JUST HAPPY TO BE ALIVE. |
|
|
|
08-31-2004, 01:22 PM
|
#2 |
|
Is a bullfrog waterproof?
Join Date: Nov 2000
Location: OLATHE, KANSAS
Posts: 1,130
|
The inside door panel has to come off. Take a putty knife (if you don't have a door panel tool) and pry around the plastic retainer clips (christmas trees..you will see when you get them loose) and careful not to rip them out. Maybe something as simple as the flat power connector that hooks onto the back of the switch has worked loose. Power goes to the driver's side first and then to the passenger's side. If you break any of the retainers that sell them at most auto parts stores.
Good Luck... 
__________________
"It is better to remain silent and be thought a fool, than to open one's mouth and remove all doubt." Ben Franklin __________________ 1970 Chevy shortbed 2002 Harley Custom Chopper (Long sucker) 1998 K2500 5.7L 5-speed Longbed 1st two are My son's toys...they just live in my garage! 1997 GMC K1500 Suburban 1993 S-10 Blazer 4D (youngest son's daily driver) 2000 Dodge Ram 4WD Ext. Cab (5.9L) Wife is a late year 1951 |
|
|
|
|
08-31-2004, 04:00 PM
|
#3 |
|
Registered User
Join Date: Feb 2004
Location: TONEY ALA
Posts: 307
|
Thanks Old Dave Steve
__________________
JUST HAPPY TO BE ALIVE. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
