MD WTB bed floor patchs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 09-05-2025, 05:06 PM

I am looking to see if anyone has a good rear bed floor that they are cutting up. Specifically the section that the wheel tubs bolt to about 4" all the way around the opening for both sides of the floor. I have made them before just looking to save some time if someone has some good cuts. Shipping would be to MD.

Basically cut where the yellow lines are, which is roughly 4". It can be a little more but not less.

Thanks

.

**sfont66** · 09-06-2025, 11:16 PM

I may be able to help with part of your request.
A few years ago I installed wider wheel tubs, and it required that the bed floor be cut out in that area, I can’t remember the exact amount removed , but I believe I saved the parts cut out. I will check the shed tomorrow to see if I saved the pieces and if they are wide enough to help you out.

**Getter-Done** · 09-06-2025, 11:59 PM

Link: https://67-72chevytrucks.com/vboard/...d.php?t=854899

Member Ironhorse has some left.
Not sure if it's what you need.

**sfont66** · 09-07-2025, 02:50 PM

I do have these pieces, and another 1’ wide cut off the front of the bed floor, but that has the cross member in it , and likely isn’t practical to ship.
The 2 pieces cut from the area of the wheel tubs are 4.75 inches wide by 37.5 inches long. The longer piece was removed from the back of the bed and measures 7.5” x 63”

I don’t want to undermine a potential sale for Ironhorse, and it’s possible he may have some cuts of the wheel tub area that are longer and able to cover the entire length without having to graft a piece in. So it may be of some benefit to check with him first.

**Ironhorse** · 09-07-2025, 08:02 PM

sfont66, if you can help the OP with his wheel tub sections go for it. All the floor material I have is main floor flat sections. All solid and very usable but no corner or perimeter sections left at all. Thanks for the consideration but no worries about under mining a potential sale.

**richard2717** · 09-08-2025, 08:31 AM

sfont66 I would be interested in the 2 4" pcs pending shipping costs. I will pm my address

Thanks
Richard

**sfont66** · 09-08-2025, 10:56 PM

Quote:

Originally Posted by richard2717

sfont66 I would be interested in the 2 4" pcs pending shipping costs. I will pm my address

Thanks
Richard

PM sent

09-05-2025, 05:06 PM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,401	WTB bed floor patchs I am looking to see if anyone has a good rear bed floor that they are cutting up. Specifically the section that the wheel tubs bolt to about 4" all the way around the opening for both sides of the floor. I have made them before just looking to save some time if someone has some good cuts. Shipping would be to MD. Basically cut where the yellow lines are, which is roughly 4". It can be a little more but not less. Thanks . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

09-06-2025, 11:16 PM	#2
sfont66 Senior Member Join Date: Nov 2015 Location: Pine City MN Posts: 431	Re: WTB bed floor patchs I may be able to help with part of your request. A few years ago I installed wider wheel tubs, and it required that the bed floor be cut out in that area, I can’t remember the exact amount removed , but I believe I saved the parts cut out. I will check the shed tomorrow to see if I saved the pieces and if they are wide enough to help you out. __________________ 72 C10, Was a 350,M20, Brodix heads,Comp cam, Edelbrock intake&carb, Hedman hedders LWB. Project is now a 5.3(L33) w/PRC stage 2.5 CNC ported 243heads, FAST 102/102, FIC injectors,BTR RedHot cam,Holley Terminator X, T56 magnum. SWB, Boyd tank. 4.5/4 Drop http://67-72chevytrucks.com/vboard/s...My72c10project

09-06-2025, 11:59 PM	#3
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 9,873	Re: WTB bed floor patchs Link: https://67-72chevytrucks.com/vboard/...d.php?t=854899 Member Ironhorse has some left. Not sure if it's what you need. __________________ ________________________________________________________________________________________ ____________________________________________ The early bird gets the worm, But the second mouse gets the cheese 85 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

09-07-2025, 02:50 PM	#4
sfont66 Senior Member Join Date: Nov 2015 Location: Pine City MN Posts: 431	Re: WTB bed floor patchs I do have these pieces, and another 1’ wide cut off the front of the bed floor, but that has the cross member in it , and likely isn’t practical to ship. The 2 pieces cut from the area of the wheel tubs are 4.75 inches wide by 37.5 inches long. The longer piece was removed from the back of the bed and measures 7.5” x 63” I don’t want to undermine a potential sale for Ironhorse, and it’s possible he may have some cuts of the wheel tub area that are longer and able to cover the entire length without having to graft a piece in. So it may be of some benefit to check with him first. Attached Images __________________ 72 C10, Was a 350,M20, Brodix heads,Comp cam, Edelbrock intake&carb, Hedman hedders LWB. Project is now a 5.3(L33) w/PRC stage 2.5 CNC ported 243heads, FAST 102/102, FIC injectors,BTR RedHot cam,Holley Terminator X, T56 magnum. SWB, Boyd tank. 4.5/4 Drop http://67-72chevytrucks.com/vboard/s...My72c10project

09-07-2025, 08:02 PM	#5
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,651	Re: WTB bed floor patchs sfont66, if you can help the OP with his wheel tub sections go for it. All the floor material I have is main floor flat sections. All solid and very usable but no corner or perimeter sections left at all. Thanks for the consideration but no worries about under mining a potential sale. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

09-08-2025, 08:31 AM	#6
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,401	Re: WTB bed floor patchs sfont66 I would be interested in the 2 4" pcs pending shipping costs. I will pm my address Thanks Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.