Bucketlist Blazer -Restomod build 6.6liter L8T

[SCOTI]

Originally Posted by NDM

I am currently in a delimma.
-Do a flip kit and keep my 4x4 rear with 3.73 gears by swapping the 6 for 5lug axles. Later convert to 4link.
-Install the 2wd truck arms and coils but that diff has 3.07 open gears. My plan was to do 3.73 and a truetrac.
-Pull the 4x4 diff and weld new angled perches for 2wd truck arms. Swap to the 5 lug axles Install the truetrac.

T/A set-up is a no-brainer as the chassis is made for it as well as leafs & a better set-up vs the flipped leafs. The T/A axle housing brackets are available from several sites so they should be easy enough to obtain. Then it would just be adding the TrueTrac when convenient.

T/A set-up also works w/the style of chassis bracing previously linked.

Another chassis brace source:
https://tinworksfabrication.com/prod...y-truck/63-72/