serpentime belt set up Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1968GMC · 09-02-2004, 10:21 AM

I know I need a water pump for this set up but someone told me l need an alternator also. Is this true?

neonlarry · 09-02-2004, 10:59 AM

yup, and a p/s pump, and a fan, all the pulleys, etc. Pretty much everything from the donor vehicle. A/c delete pulleys are really hard to find if you arent going to run a/c in your truck too.

MIKE'67 · 09-02-2004, 11:40 AM

You will need a reverse flow water pump as the serpentine system causes the pump to run the opposite way. Your local NAPA parts delaer can help you out with this.

Longhorn Man · 09-02-2004, 07:49 PM

And make sure to remember what the parts came off of, that way when you get replacement parts...say a water pump, you just tell them it is off a 92 S-10 blazer with the 4.3....or what ever you pull it all off of.

**kwmech** · 09-02-2004, 09:31 PM

Does not matter which way an alternator spins, or mounts. You will need the correct pulley though which can be swapped onto your alternator, but now would be the time to upgrade to an internal reg if you haven't already.

neonlarry · 09-03-2004, 12:02 AM

The old alternators dont really fit into the new brackets... Its way eaiser to get one off of the truck or car the other stuff comes off of. If you are lucky you can even find the bracket that fits the cs144 alternator.

09-02-2004, 10:21 AM	#1
1968GMC love my truck Join Date: May 2001 Location: aylmer QC Posts: 648	serpentime belt set up Question I know I need a water pump for this set up but someone told me l need an alternator also. Is this true?

09-02-2004, 10:59 AM	#2
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	yup, and a p/s pump, and a fan, all the pulleys, etc. Pretty much everything from the donor vehicle. A/c delete pulleys are really hard to find if you arent going to run a/c in your truck too. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

09-02-2004, 11:40 AM	#3
MIKE'67 Registered User Join Date: Nov 2001 Location: Albertville, Alabama USA Posts: 299	You will need a reverse flow water pump as the serpentine system causes the pump to run the opposite way. Your local NAPA parts delaer can help you out with this. __________________ 1977 Short Stepside, black, 350/350. Located in Albertville, Alabama.

09-03-2004, 12:02 AM	#6
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	The old alternators dont really fit into the new brackets... Its way eaiser to get one off of the truck or car the other stuff comes off of. If you are lucky you can even find the bracket that fits the cs144 alternator. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

09-02-2004, 07:49 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	And make sure to remember what the parts came off of, that way when you get replacement parts...say a water pump, you just tell them it is off a 92 S-10 blazer with the 4.3....or what ever you pull it all off of.

09-02-2004, 09:31 PM	#5
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,499	Does not matter which way an alternator spins, or mounts. You will need the correct pulley though which can be swapped onto your alternator, but now would be the time to upgrade to an internal reg if you haven't already.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.