Window position problem with my Nu-Relics power window conversion. Help!!!

[Richard]

Mine installed in the 72 the glass retainer (track) does sit a but proud inside. It does not really interfere with outer seal or inner felt in a way that interferes with operation or outer seal.

My thoughts to fix. Remove regulator and window. Reset window with a small spacer in the track. Lot of work and window is less secured to track.
A quick easy fix- cram a piece of 3/16 or 1/4" rope in at top of window channel. Maybe secure to backside of window channel if it does not push channel out to far.
Other would be to cut strips of abs to go in behind window channel at top. Enough to stop travel and still allow channel to seat.