info and pics of c20 with axle flip

[SCOTI]

Originally Posted by ullose272

thats fine, im going to pancake the front, spindles, and springs. see how its sitting, if its too low in the rear ill build a link setup.

You can also add a 'lift' shackle to raise the set-up slightly.

It's the next gen but my '99 is a 3/4 ton 8-lug w/the Semi Float 14bolt housing. I did a flip kit but it was too much drop vs the front (3" spindle + 1-coil removed from the springs). I used the lift shackles to balance it out. My Squarebody dually was going to get the same thing but I changed direction & did a 4-bar as well.