A/C Cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

luckydog · 09-02-2004, 09:32 PM

How much should I expect to pay for a solid A/C cab? A little surface rust is fine, but it needs to be pretty straight. Just need a number.

john@thepier · 09-02-2004, 10:06 PM

THE one you describe you want will more than likely run 800. to 1400. $

neonlarry · 09-02-2004, 11:00 PM

$8-1400, yikes! I was thinking more like $200. At least thats what I would pay around here.

chevy2racr · 09-02-2004, 11:21 PM

i paid 350 I think for a A/C cheyenne cab and doors, little rust like dime holes 1 or 2 in rockers and one corner, and a couple dings...

*dtlilly* · 09-02-2004, 11:22 PM

Welcome to the board from another Wisconsin member. A rust free example simply doesn't exist today,, but you are most likely going to spend more than $200 for a clean cab.

cableguy0 · 09-02-2004, 11:28 PM

here in md for a cab in good shape with very little rust i would be willing to pay anywhere between 500 and 1000 if i could find one

landon4421 · 09-03-2004, 01:17 AM

I sold one a year ago for $450. It was in great shape. Told the guy to make ma an offer and that is what I got for it.

Stryker67 · 09-03-2004, 07:22 AM

I'd be happy to get a nice cab to replace the one on my Longhorn. It's so rough that the roof is rusted through on top.

HOTFUN · 09-03-2004, 10:01 AM

I bought and paid a small fortune for a whole 60k mile rust free NON air, 67 GMC 3/4 2wd truck because the cab was totally rust free. I still have cab dents to massage on the back panel but it was priceless when I figured the caliber of truck I was going to build. I figure after selling a few spare parts I will have $1000 in a rustfree cab with doors and bucket seat. Probelm is the cab back panel will take $400 labor to body finish out.
You can't even by patch panels and good quality rockers for $200 and labor is $42 per hour here if your time is worth anything.
Mark

**N2TRUX** · 09-03-2004, 10:04 AM

Y'all need to come to Texas for your parts trucks. It sounds like it would be worth your trip. 67-72 are still abundant in Texas....

**JIMs70GMC** · 09-03-2004, 10:55 AM

Paid $400 for mine, rockers and roof had been replaced, doors solid no speaker holes. Needed weather stripping/seat and carpet/mat.

luckydog · 09-03-2004, 12:32 PM

Huh. Sounds like I did pretty good then. I got an entire A/C truck for free. There is some dime holes but the doors are nearly perfect. One good fender, the box has some good dents in it but... Its a long bed 67 gmc 3/4 ton with a 350 but its set up. It's a texas truck with 31000 mi. on it. The guy just wanted it out of his yard. I still can believe its sitting in my yard. Now i should have all the parts to put together my 67 chevy swb. O yea and i got a 70? chevy van with disc brakes sitting in my back yard just waiting to be torn apart. Everybody ive talked to said the parts should bolt right up. And its got the gas tank behind the rearend so im hoping that will be pretty close to bolt up. I think ive pretty well described the reason i chose my name.

haha.
This forum is exactly whati ive been looking for. tons of good info and very quick responses. I will try and keep you posted on the project and i hope to have some pics up next week.

09-02-2004, 09:32 PM	#1
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	A/C Cab How much should I expect to pay for a solid A/C cab? A little surface rust is fine, but it needs to be pretty straight. Just need a number.

09-02-2004, 11:00 PM	#3
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	$8-1400, yikes! I was thinking more like $200. At least thats what I would pay around here. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

09-02-2004, 11:21 PM	#4
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	i paid 350 I think for a A/C cheyenne cab and doors, little rust like dime holes 1 or 2 in rockers and one corner, and a couple dings... __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

09-02-2004, 11:28 PM	#6
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	here in md for a cab in good shape with very little rust i would be willing to pay anywhere between 500 and 1000 if i could find one __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

09-03-2004, 01:17 AM	#7
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	I sold one a year ago for $450. It was in great shape. Told the guy to make ma an offer and that is what I got for it. __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-02-2004, 10:06 PM	#2
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	THE one you describe you want will more than likely run 800. to 1400. $

09-02-2004, 11:22 PM	#5
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Welcome to the board from another Wisconsin member. A rust free example simply doesn't exist today,, but you are most likely going to spend more than $200 for a clean cab.

09-03-2004, 07:22 AM	#8
Stryker67 Registered User Join Date: May 2004 Location: Fayetteville, Ga. Posts: 150	I'd be happy to get a nice cab to replace the one on my Longhorn. It's so rough that the roof is rusted through on top. __________________ [FONT=Georgia] If nothing else, we can all serve as a bad example. We don't know what we don't know. The world needs ditch-diggers too.

09-03-2004, 10:01 AM	#9
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	I bought and paid a small fortune for a whole 60k mile rust free NON air, 67 GMC 3/4 2wd truck because the cab was totally rust free. I still have cab dents to massage on the back panel but it was priceless when I figured the caliber of truck I was going to build. I figure after selling a few spare parts I will have $1000 in a rustfree cab with doors and bucket seat. Probelm is the cab back panel will take $400 labor to body finish out. You can't even by patch panels and good quality rockers for $200 and labor is $42 per hour here if your time is worth anything. Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

09-03-2004, 10:04 AM	#10
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Y'all need to come to Texas for your parts trucks. It sounds like it would be worth your trip. 67-72 are still abundant in Texas.... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

09-03-2004, 10:55 AM	#11
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Paid $400 for mine, rockers and roof had been replaced, doors solid no speaker holes. Needed weather stripping/seat and carpet/mat. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

09-03-2004, 12:32 PM	#12
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	Huh. Sounds like I did pretty good then. I got an entire A/C truck for free. There is some dime holes but the doors are nearly perfect. One good fender, the box has some good dents in it but... Its a long bed 67 gmc 3/4 ton with a 350 but its set up. It's a texas truck with 31000 mi. on it. The guy just wanted it out of his yard. I still can believe its sitting in my yard. Now i should have all the parts to put together my 67 chevy swb. O yea and i got a 70? chevy van with disc brakes sitting in my back yard just waiting to be torn apart. Everybody ive talked to said the parts should bolt right up. And its got the gas tank behind the rearend so im hoping that will be pretty close to bolt up. I think ive pretty well described the reason i chose my name. haha. This forum is exactly whati ive been looking for. tons of good info and very quick responses. I will try and keep you posted on the project and i hope to have some pics up next week.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.