Doetsch Tech Nitro Slammers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

8t5Silverado · 08-09-2004, 06:51 PM

Doetsch Tech Nitro Slammer Shocks (two 4052's and two 4095's)

$100 plus shipping

(fronts were installed for a very short time (maybe 30 miles on them))

(the rears are brand new, never installed)

Please post here before you PM so that it stays in order this time.

Thanks,
Brandon
Again, I travel with work, so if I don't get back to you right away, please be patient.

SixthFloorFreak · 08-15-2004, 10:42 PM

how much drop are these designed for?

8t5Silverado · 08-16-2004, 01:57 PM

I think they work for a 3/5 or 4/6. I was doing a 4/5 (really 4/6 with my spring sag) with Western Chassis shock extenders.

8t5Silverado · 08-19-2004, 01:16 PM

to the top

cochino12 · 08-19-2004, 01:23 PM

Will you sell just the rear? if so how much shipped to 80134

8t5Silverado · 09-01-2004, 06:54 PM

Sorry Adam,

I lost track of this thread.

corn · 09-04-2004, 08:21 PM

are the 4 shocks sold yet?

slammed_82 · 09-04-2004, 10:39 PM

do you have to have the shock extenders to use the rear shocks if so where did you get them from nd do you have a part # thanks

ocbaud · 09-05-2004, 12:16 PM

i'm interested

ocbaud · 09-05-2004, 12:20 PM

Quote:

Originally Posted by SixthFloorFreak

how much drop are these designed for?

0-2.5" 2" 4052G 4231G
1.5-2" 3-4" 4052G 4163G
2.5-4" 5" 4809G 4095G
4" 6" 4052G 4095G
5-6.5" 7" 4809G 4095G

4052-front
4095-rear(i havent seen a 4093)

the fronts should be good up to 4" drop in the front. but that is only counting drop springs, since the spindles just move the wheel position. and the rears are good for a 5", 6", or 7" drop in the rear

8t5Silverado · 09-07-2004, 01:07 PM

I still have the 4 shocks.

Sorry, I am travelling with work and can't check the board everyday.

I got the shock extenders (they're gone now) from macspring, but I don't know the part number.

What Eric said is true. The drop created using a drop spindle does not affect the shock length at all, since it does not alter the geometry of the a-arms.

When you use a drop coil spring or a spindle with a drop coil spring, then a shorter shock is necessary.

I got a PM wanting these, so that is pending right now.

8t5Silverado · 09-07-2004, 01:08 PM

http://www.macsspring.com/website/sh...hevy-frame.htm

08-09-2004, 06:51 PM	#1
8t5Silverado Mudslides 'r my specialty Join Date: Dec 2003 Location: STL Posts: 1,106	Doetsch Tech Nitro Slammers Doetsch Tech Nitro Slammer Shocks (two 4052's and two 4095's) $100 plus shipping (fronts were installed for a very short time (maybe 30 miles on them)) (the rears are brand new, never installed) Please post here before you PM so that it stays in order this time. Thanks, Brandon Again, I travel with work, so if I don't get back to you right away, please be patient. __________________ Always on the lookout for old cars and parts...(20s, 30s, 40s, 50s, 60s, etc.) http://www.cardomain.com/memberpage/500339 Last edited by 8t5Silverado; 09-07-2004 at 01:02 PM.

08-16-2004, 01:57 PM	#3
8t5Silverado Mudslides 'r my specialty Join Date: Dec 2003 Location: STL Posts: 1,106	I think they work for a 3/5 or 4/6. I was doing a 4/5 (really 4/6 with my spring sag) with Western Chassis shock extenders. __________________ Always on the lookout for old cars and parts...(20s, 30s, 40s, 50s, 60s, etc.) http://www.cardomain.com/memberpage/500339

08-19-2004, 01:16 PM	#4
8t5Silverado Mudslides 'r my specialty Join Date: Dec 2003 Location: STL Posts: 1,106	to the top __________________ Always on the lookout for old cars and parts...(20s, 30s, 40s, 50s, 60s, etc.) http://www.cardomain.com/memberpage/500339

08-19-2004, 01:23 PM	#5
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Will you sell just the rear? if so how much shipped to 80134 __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

09-01-2004, 06:54 PM	#6
8t5Silverado Mudslides 'r my specialty Join Date: Dec 2003 Location: STL Posts: 1,106	Sorry Adam, I lost track of this thread. __________________ Always on the lookout for old cars and parts...(20s, 30s, 40s, 50s, 60s, etc.) http://www.cardomain.com/memberpage/500339

08-15-2004, 10:42 PM	#2
SixthFloorFreak Registered User Join Date: Dec 2003 Location: Morgantown, KY Posts: 103	how much drop are these designed for?

09-04-2004, 08:21 PM	#7
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	are the 4 shocks sold yet?

09-04-2004, 10:39 PM	#8
slammed_82 Ground Pounder Join Date: Sep 2004 Location: Yankton SD Posts: 54	shocks do you have to have the shock extenders to use the rear shocks if so where did you get them from nd do you have a part # thanks

09-05-2004, 12:16 PM	#9
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	i'm interested

09-07-2004, 01:07 PM	#11
8t5Silverado Mudslides 'r my specialty Join Date: Dec 2003 Location: STL Posts: 1,106	I still have the 4 shocks. Sorry, I am travelling with work and can't check the board everyday. I got the shock extenders (they're gone now) from macspring, but I don't know the part number. What Eric said is true. The drop created using a drop spindle does not affect the shock length at all, since it does not alter the geometry of the a-arms. When you use a drop coil spring or a spindle with a drop coil spring, then a shorter shock is necessary. I got a PM wanting these, so that is pending right now. __________________ Always on the lookout for old cars and parts...(20s, 30s, 40s, 50s, 60s, etc.) http://www.cardomain.com/memberpage/500339

09-07-2004, 01:08 PM	#12
8t5Silverado Mudslides 'r my specialty Join Date: Dec 2003 Location: STL Posts: 1,106	http://www.macsspring.com/website/sh...hevy-frame.htm __________________ Always on the lookout for old cars and parts...(20s, 30s, 40s, 50s, 60s, etc.) http://www.cardomain.com/memberpage/500339



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.