|
08-29-2004, 05:00 PM
|
#1 |
|
Registered User
Join Date: Sep 2003
Location: Marietta, GA
Posts: 55
|
drop in bedliner
Does any company currently make drop in bed liners for 67-72 GM swb fleetside pickups? Please let me know if so and where I could get one in the Atlanta area.
|
|
|
|
09-08-2004, 02:41 AM
|
#2 |
|
Southern Bowties
Join Date: Jan 2003
Location: Fort Worth, TX
Posts: 240
|
I've been thinking about this also, so checked today. So far I've found Pendaliner only goes back to '73. So does Duraliner, but, Duraliner also makes a brand called Allstar and they have one for a 67-72 lwb for $139. I'm still looking around, are there any other brands out there?
www.durakon.com
__________________
1972 Cheyenne 350/350 |
|
|
|
|
09-08-2004, 05:52 AM
|
#3 |
|
Registered User
 
Join Date: Apr 2004
Location: The Other Maine!
Posts: 2,236
|
Bedliners trap moisture and in some cases hurry along the rust factor. I would do the spray on bedliners that protect and inhibit the rust from forming! Too bad you are not closer, I would give you one I took off when I rino lined the bed.
__________________
1968 Chevy 4x4 307 4 speed |
|
|
|
|
09-08-2004, 12:12 PM
|
#4 |
|
Registered User
Join Date: Feb 2002
Location: Ferndale, Michigan, USA
Posts: 94
|
Almost any under the rail bedliner from 73-87 will work. Had one from DuraLiner in my 72 LWB from an 86. If I were going to do another liner, I think I would go with the spray on.
|
|
|
|
|
09-08-2004, 07:51 PM
|
#5 |
|
Registered User
Join Date: Jan 2000
Location: ca
Posts: 1,110
|
if the paint is new and not scratched then water won't be a problem. don't put a bed liner on a scratched to hell bed
__________________
68 short step, 406/700r4, 9" w/discs. |
|
|
|
|
09-08-2004, 07:54 PM
|
#6 |
|
Senior Member
Join Date: Apr 2000
Location: Delta,Pa
Posts: 14,948
|
drop in bedliners scratch the hell outta the bed all by themselves. i would have it rhino lined if i were you. my dad's 97 had a bedliner from the dealer and to look under that bedliner now will make u sick with that paint thats gone like someone hit it with a grinder
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member. |
|
|
|
|
09-08-2004, 10:03 PM
|
#7 |
|
Sisyphus was my mentor!
Join Date: Sep 2002
Location: Carleton Place, Ontario CANADA
Posts: 984
|
Durakon told me via the phone that they make one for our trucks 68 & up. Whats the diff between 67 & 68+ beds? I think its the drain hole location....
__________________
passthebuck  #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
