71 SWB BBC Fleetside Truck For Sale in DFW Area - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smonty · 08-31-2004, 09:50 PM

Hate to sell this truck but need to as I am moving and will not have room for it. It is a good driver and has served me well. Just got back from Arkansas towing a truck back and have been to Randy's in Kansas in to haul stuff back to Texas in it. It is not a perfect truck for sure but a bargain for someone who needs a driver to fix up and can afford the gas. I will take $3700.00 for it. Going to Arkansas I had a blowout and it screwed up the driver's side wheel well area of the bedside but is not too tough a fix. For $100.00 I will throw in a good driver's side bedside to go with the truck. It is a factory black 402 BBC truck with the original motor that has about 10000 miles on the rebuild. Runs strong, good oil pressure and uses no oil at all. Power steering, manual brakes and no air. T400 Tranny that was rebuilt the same time as the motor. You can drive the truck anywhere. It needs front shocks. It has a new power steering gear. Could use a new set of wheels. The interior was originally blue which does not go well with the Black. I have been changing the blue out with red. Red does go really well. I have a new red dash pad and some red door panels with nice arm rests I got from Randy. You can email or PM me with any questions you may have.

Thanks for looking,

Ernie

matt67350 · 08-31-2004, 11:24 PM

You didn't tell them is a 402.

*dtlilly* · 08-31-2004, 11:43 PM

[QUOTE=smonty...... It is a factory black BBC truck with the original motor that has about 10000 miles on the rebuild....[/QUOTE]

Sounds like a 402 to me.

matt67350 · 09-01-2004, 12:02 AM

My bad, I type 454.
It is a BBC and does run good.
I edited the reply
Sorry,
Matthew

Swbman · 09-01-2004, 12:33 AM

Ernie, Say it isn't so,you can't be getting rid of the Big Block Swb.I know the deal,but there's gotta be a way to keep her.

zooza · 09-01-2004, 12:45 AM

this wont last long!

smonty · 09-01-2004, 10:12 AM

The truck does have the original 402 BBC motor.

DStewart · 09-01-2004, 11:08 AM

That is a smokin deal, someone's going to be very lucky.

dallas71 · 09-01-2004, 11:24 AM

Very SWEET DEAL and Runs like a bat outta H##L! Very good price also....

**D.PASSMORE** · 09-01-2004, 11:31 AM

Hey Ernie! Your not moving out of Texas? You are a great source of parts over yonder. Man, that would be devastating for the board and then selling that sweet little truck,UGH! Your not going to the JEEPs are ya?lol. :p

*dtlilly* · 09-01-2004, 11:33 AM

Matt, no problem

That is going to make someone a very sweet truck to have and to hold for as long as they shall live

6camaro9 · 09-01-2004, 01:30 PM

"no air"

"manual brakes"

does it have disk?

pics of damage wheel well?

pics of the interior?

pics under the hood?

any rust?

what does it need?

thanks,
thomas...

matt67350 · 09-01-2004, 04:04 PM

It needs you to buy it.
TTT for Ernie.

**JDL** · 09-02-2004, 08:28 PM

I would like to see some more pic to.

smonty · 09-03-2004, 12:45 AM

The interior is not done. It was blue and I am in the process of changing it to red which looks nice. I am also putting some nicer mirrors and door handles on it. The steering column is still blue and needs to be painted black. The steering wheel is blue but is cracked all to HeII. The seat is good and with the black and red houndstooth cover from Kenny's ($200.00) and a carpet kit the truck would be really decent. I had some body work done on some areas that had rust. The rust was cleaned up then fiber glass was used instead of bondo. Seems to hold up much better. It needs nothing to drive but power brakes would be nice. It is a good driver like it is. I have hauled heavy loads at 80-85 mph up and down hills with it. I will post some pictures of the damage on the driver's side bedside caused by the blowout. This is an easy fix for a body man but not for me. I will also post a picture of the engine compartment. Engine is tight, has no funny noises, uses no oil. Don't know what else to say about it. A lot of truck for the $$$.

vtblazer · 09-03-2004, 07:58 AM

PM sent.

soala70 · 09-03-2004, 08:54 AM

whats up sent you a PM on the tailgate I ordered see if you had time to ship it yet.

smonty · 09-03-2004, 09:42 AM

Hey soala70,

Sent you a PM. I am moving and have not gone by FedEx yet. I have some motor mounts, armrests and bedsides to ship also and some fenders to deliver. I plan to do this tomorrow as I will be off for the next three days and can get finished up here.

Ernie

Longhorn Man · 09-03-2004, 10:24 AM

6camaro9, it would have discs up front.

sinister72 · 09-03-2004, 09:32 PM

if you were closer to kentucky i would have bought it already

vtblazer · 09-10-2004, 06:52 PM

The truck has been sold.

08-31-2004, 09:50 PM	#1
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	71 SWB BBC Fleetside Truck For Sale in DFW Area Hate to sell this truck but need to as I am moving and will not have room for it. It is a good driver and has served me well. Just got back from Arkansas towing a truck back and have been to Randy's in Kansas in to haul stuff back to Texas in it. It is not a perfect truck for sure but a bargain for someone who needs a driver to fix up and can afford the gas. I will take $3700.00 for it. Going to Arkansas I had a blowout and it screwed up the driver's side wheel well area of the bedside but is not too tough a fix. For $100.00 I will throw in a good driver's side bedside to go with the truck. It is a factory black 402 BBC truck with the original motor that has about 10000 miles on the rebuild. Runs strong, good oil pressure and uses no oil at all. Power steering, manual brakes and no air. T400 Tranny that was rebuilt the same time as the motor. You can drive the truck anywhere. It needs front shocks. It has a new power steering gear. Could use a new set of wheels. The interior was originally blue which does not go well with the Black. I have been changing the blue out with red. Red does go really well. I have a new red dash pad and some red door panels with nice arm rests I got from Randy. You can email or PM me with any questions you may have. Thanks for looking, Ernie Attached Images __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project Last edited by smonty; 09-01-2004 at 10:13 AM. Reason: Adding Information about Motor

08-31-2004, 11:24 PM	#2
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	Guys it's 454 You didn't tell them is a 402. __________________ 69 swb stepside, rebuild and upgrade in progress Last edited by matt67350; 09-01-2004 at 12:03 AM.

09-01-2004, 12:02 AM	#4
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	My bad, I type 454. It is a BBC and does run good. I edited the reply Sorry, Matthew __________________ 69 swb stepside, rebuild and upgrade in progress Last edited by matt67350; 09-01-2004 at 12:05 AM.

09-01-2004, 12:33 AM	#5
Swbman Senior Member Join Date: Mar 2004 Location: Tulsa,Oklahoma Posts: 606	Ernie, Say it isn't so,you can't be getting rid of the Big Block Swb.I know the deal,but there's gotta be a way to keep her. __________________ 1961 BUICK LESABRE 1968 CHEVELLE SS 396 1969 BUICK RIVIERA GS 1971 2 WHEEL DRIVE BLAZER 1971 4X4 BLAZER 1971 SHORTBED CHEYENNE FLEETSIDE 1971 SHORTBED 4X4 FLEETSIDE ** ...My Ebay

09-01-2004, 10:12 AM	#7
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Has Original Factory 402 BBC The truck does have the original 402 BBC motor. __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

08-31-2004, 11:43 PM	#3
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	[QUOTE=smonty...... It is a factory black BBC truck with the original motor that has about 10000 miles on the rebuild....[/QUOTE] Sounds like a 402 to me.

09-01-2004, 12:45 AM	#6
zooza Registered User Join Date: Jul 2004 Location: LINDEN, TN. Posts: 260	this wont last long!

09-01-2004, 11:08 AM	#8
DStewart Registered User Join Date: Aug 2004 Location: Dayton, Nv. Posts: 62	That is a smokin deal, someone's going to be very lucky.

09-01-2004, 11:24 AM	#9
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	Very SWEET DEAL and Runs like a bat outta H##L! Very good price also.... __________________ My 1966 LWB Truck My 1966 SWB Truck

09-01-2004, 11:31 AM	#10
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	What? Hey Ernie! Your not moving out of Texas? You are a great source of parts over yonder. Man, that would be devastating for the board and then selling that sweet little truck,UGH! Your not going to the JEEPs are ya?lol. :p

09-01-2004, 11:33 AM	#11
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Matt, no problem That is going to make someone a very sweet truck to have and to hold for as long as they shall live

09-01-2004, 01:30 PM	#12
6camaro9 Registered User Join Date: Jun 2004 Location: Moving, TX Posts: 35	"no air" "manual brakes" does it have disk? pics of damage wheel well? pics of the interior? pics under the hood? any rust? what does it need? thanks, thomas...

09-01-2004, 04:04 PM	#13
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	It needs you to buy it. TTT for Ernie. __________________ 69 swb stepside, rebuild and upgrade in progress

09-02-2004, 08:28 PM	#14
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,839	I would like to see some more pic to. __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa Last edited by JDL; 09-02-2004 at 08:41 PM.

09-03-2004, 12:45 AM	#15
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Reply to 6camaro9 and JDL The interior is not done. It was blue and I am in the process of changing it to red which looks nice. I am also putting some nicer mirrors and door handles on it. The steering column is still blue and needs to be painted black. The steering wheel is blue but is cracked all to HeII. The seat is good and with the black and red houndstooth cover from Kenny's ($200.00) and a carpet kit the truck would be really decent. I had some body work done on some areas that had rust. The rust was cleaned up then fiber glass was used instead of bondo. Seems to hold up much better. It needs nothing to drive but power brakes would be nice. It is a good driver like it is. I have hauled heavy loads at 80-85 mph up and down hills with it. I will post some pictures of the damage on the driver's side bedside caused by the blowout. This is an easy fix for a body man but not for me. I will also post a picture of the engine compartment. Engine is tight, has no funny noises, uses no oil. Don't know what else to say about it. A lot of truck for the $$$. __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project



Register or Log In To remove these advertisements.

09-03-2004, 07:58 AM	#16
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	PM sent.

09-03-2004, 08:54 AM	#17
soala70 Registered User Join Date: Mar 2002 Location: geneva al usa Posts: 343	whats up sent you a PM on the tailgate I ordered see if you had time to ship it yet. __________________ bogey5

09-03-2004, 09:42 AM	#18
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	reply to soala70 Hey soala70, Sent you a PM. I am moving and have not gone by FedEx yet. I have some motor mounts, armrests and bedsides to ship also and some fenders to deliver. I plan to do this tomorrow as I will be off for the next three days and can get finished up here. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

09-03-2004, 10:24 AM	#19
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	6camaro9, it would have discs up front.

09-03-2004, 09:32 PM	#20
sinister72 Registered User Join Date: Apr 2002 Location: Bowling Green, kentucky Posts: 182	if you were closer to kentucky i would have bought it already __________________ 72 chevy C-10 swb fleetside,402 BB.700r4,buckets,console.etc. 72 Blazer CST 350,AT, new project 1971 Chevy Nova ,355 SB blow through turbo in works.

09-10-2004, 06:52 PM	#21
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	smonty asked me to post for him The truck has been sold. Last edited by vtblazer; 09-10-2004 at 08:42 PM.

Register or Log In To remove these advertisements.