parts for sale - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue_71 · 08-30-2004, 07:11 PM

just to make sure, i take it you want a acc gauge dash?

cojnit · 08-30-2004, 07:13 PM

yes please, no tach needed.

Also have an idea for a no acc dash, if you have a price on one.

BuckeyeBlazer · 08-30-2004, 11:48 PM

Sent you a private message concerning purchasing one of your q-jets.
Thanks

Blue_71 · 09-01-2004, 04:45 PM

cojnit-- i should have everything to put together either kind of dash, it'll be $45 OBO for gauge, $35 OBO for dummy light, or $20 for a speedo

elenhoff-- one will be comign back your way shortly

cojnit · 09-01-2004, 05:07 PM

just to clarify, is that $40 for a complete assembled cluster with bezel, rear housing and printed circuit?

Blue_71 · 09-01-2004, 10:32 PM

i *think* i have the circuit board. i'll have to go through all the gauge assemblies i have and make sure, but i know i have everything else for one. right now they are all apart but if you decide you want one i'll give you choice of which of the parts and i'll put it back together

Blue_71 · 09-02-2004, 07:25 PM

cojnit:
i checked and i have a good printed circuit for a dummy light dash, but both my gauge dash printed circuits are bad. one of them has alot of the blue insulation cut out and the other has some burned out wires. i have all of the parts other then that to make a good complete gauge panel of either type. in the pics, they do not have the lights or the light holders but i have all of them if you need them.
your pics can be found here (click this)

zooza: your pics are also here, temp gauge one, temp gauge two, temp gauge two side veiw, and temp gauge three are your pics. i will also PM you this info to make sure you get it

NDfan1 · 09-03-2004, 08:01 PM

do you still have a radiator support for GMC? How much shipped to 46932 zip. Thanks

Blue_71 · 09-03-2004, 08:07 PM

ndfan1- according to usps, assuming its 60 lbs and guessing on the measurments (just getting a rough idea), it would be $35 shipping. i was wanting $70 obo out of it

NDfan1 · 09-03-2004, 08:21 PM

pm sent

luckydog · 09-04-2004, 10:01 PM

Im interested in your 67/8 headlight bezels if theyre in decent shape. I didnt see a pic but maybe im just blind.

roj2323 · 09-05-2004, 12:29 AM

do you have any rear sport bumper brackets lying around? if you do please pm me

Blue_71 · 09-05-2004, 01:28 PM

luckydog-- the headlight bezels i have are the base model painted steel ones, if your still interested i'll dig them out and get pics
roj23230-- i have 2 or 3 sets of bumper brackets, i'll have to compare them to the sport bumper brackets on my 69 to find out if i have a set. i'll get back to you on it

luckydog · 09-06-2004, 04:42 PM

o no thanks i need chrome.

luckydog · 09-06-2004, 04:47 PM

o no thanks i need chrome. Darn

Blue_71 · 09-09-2004, 04:56 PM

ttt

**tnblazerk5** · 09-09-2004, 05:06 PM

hey wheres the pics of them models

Blue_71 · 09-09-2004, 05:17 PM

lol, not had time to sort em to take pics

if i get some free time sometime i'll send ya some pics. you have any interesting models down your way?

**tnblazerk5** · 09-09-2004, 05:30 PM

i use too but they(had about 100 or so) all got trashed afew years (18 or so)ago

i got the girl freind pissed at me and she well thats a whole other story. i would like to find a bunch of older models and start a new(for me) collection

i have got a real 67 truck and would love to find a 67 truck model

not real sure they ever made one any way i just like models like u said there cheeper to build (but ya cant drive them)

lol

Blue_71 · 09-11-2004, 06:44 PM

TTT again

08-30-2004, 07:13 PM	#27
cojnit Nothing clever Join Date: Jun 2003 Location: Kailua HI Posts: 828	yes please, no tach needed. Also have an idea for a no acc dash, if you have a price on one. __________________ Got "the Midas Touch!"

08-30-2004, 11:48 PM	#28
BuckeyeBlazer Registered User Join Date: Dec 2003 Location: Indiana Posts: 41	q-jet carb Sent you a private message concerning purchasing one of your q-jets. Thanks

09-01-2004, 05:07 PM	#30
cojnit Nothing clever Join Date: Jun 2003 Location: Kailua HI Posts: 828	just to clarify, is that $40 for a complete assembled cluster with bezel, rear housing and printed circuit? __________________ Got "the Midas Touch!"

09-01-2004, 10:32 PM	#31
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,283	i think i have the circuit board. i'll have to go through all the gauge assemblies i have and make sure, but i know i have everything else for one. right now they are all apart but if you decide you want one i'll give you choice of which of the parts and i'll put it back together

09-02-2004, 07:25 PM	#32
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,283	cojnit: i checked and i have a good printed circuit for a dummy light dash, but both my gauge dash printed circuits are bad. one of them has alot of the blue insulation cut out and the other has some burned out wires. i have all of the parts other then that to make a good complete gauge panel of either type. in the pics, they do not have the lights or the light holders but i have all of them if you need them. your pics can be found here (click this) zooza: your pics are also here, temp gauge one, temp gauge two, temp gauge two side veiw, and temp gauge three are your pics. i will also PM you this info to make sure you get it

09-03-2004, 08:01 PM	#33
NDfan1 Registered User Join Date: Sep 2004 Location: Galveston Ind. Posts: 16	do you still have a radiator support for GMC? How much shipped to 46932 zip. Thanks

09-03-2004, 08:07 PM	#34
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,283	ndfan1- according to usps, assuming its 60 lbs and guessing on the measurments (just getting a rough idea), it would be $35 shipping. i was wanting $70 obo out of it

09-03-2004, 08:21 PM	#35
NDfan1 Registered User Join Date: Sep 2004 Location: Galveston Ind. Posts: 16	pm sent

09-04-2004, 10:01 PM	#36
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	Im interested in your 67/8 headlight bezels if theyre in decent shape. I didnt see a pic but maybe im just blind.

09-05-2004, 12:29 AM	#37
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	do you have any rear sport bumper brackets lying around? if you do please pm me

09-05-2004, 01:28 PM	#38
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,283	luckydog-- the headlight bezels i have are the base model painted steel ones, if your still interested i'll dig them out and get pics roj23230-- i have 2 or 3 sets of bumper brackets, i'll have to compare them to the sport bumper brackets on my 69 to find out if i have a set. i'll get back to you on it

09-06-2004, 04:42 PM	#39
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	o no thanks i need chrome.

09-06-2004, 04:47 PM	#40
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	o no thanks i need chrome. Darn



Register or Log In To remove these advertisements.

09-09-2004, 05:06 PM	#42
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	hey wheres the pics of them models

09-09-2004, 05:30 PM	#44
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	i use too but they(had about 100 or so) all got trashed afew years (18 or so)ago i got the girl freind pissed at me and she well thats a whole other story. i would like to find a bunch of older models and start a new(for me) collection i have got a real 67 truck and would love to find a 67 truck model not real sure they ever made one any way i just like models like u said there cheeper to build (but ya cant drive them) lol

09-11-2004, 06:44 PM	#45
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,283	TTT again

Register or Log In To remove these advertisements.