FS: 3 SBC/BBC HEI's and a AFR gauge with a needle!

[botboy]

Trying to get all these sold. I have the AFR gauge down here at school with me in ames and have it packaged, ready to ship tomorrow if need be, depending on when I get payment. The HEI's are at home, and are ready to go but will be shipped by my parents so might take a couple days to get you a tracking number.

SOLD:
1 mech advance HEI sold to Swanny for $30
1 is mechanical advance with no cap or coil, but tested and works. $30 shipped sold to frank zeller

FOR SALE:

1 mechanical advance, big cap, incl coil no cap. $45.00 shipped

1 is a TBI ESC and has no cap but has a pair of plugs on the bottom to connect it to the computer harness and wasted spark coil $30.00 shipped

I also have an AC Autotechnic 52mm S7 Air/Fuel Ratio Race Gauge. This is one of the few and far between AFR gauges that actually has a needle and points rather than a group of LED's (and honestly, I think that a pod of LED's looks real out of place in a 30 year old truck). This performed active duty in my '72 while running the TBI setup up till I parted it out and it works fine. It has a blue EL backlighting but I haven't got an EL inverter for it - something like $25.00 from your local honda dealer. I paid $67 shipped for it new, would like to get $45.00 shipped from it if I could. The only reason I'm selling is because I went from a gas to a diesel, now I need to pay for a pyrometer instead of an AFR gauge because the AFR won't work in a diesel.

Also please check out my other list of parts FS:
http://www.67-72chevytrucks.com/vboa....php3?t=114641

[botboy]

Upagain. Buy all 3 HEI's, 1 coil, and the AFR gauge I'll cut you this deal: 130 shipped to the continental US or $140 USD to canada/alaska/hawaii

[botboy]

bump

[67ChevyC10Stepside]

SWEET FREAKIN GUAGE! what size is that? can you get the rest of the set?

[Tx Firefighter]

I'd like to see a picture of the TBI distributor please.

[botboy]

http://www.usfamily.net/web/botboy60...72distswap.jpg
http://www.usfamily.net/web/botboy60...rtsonfloor.jpg

Not real great pics but should give you an idea...came out of an '89 or so suburban with a 350, TBI, used it in my '72 then sold the engine. Worked great.

[Tx Firefighter]

If I buy the distributor, when will you be able to ship it to me?

[Frank_Zeller]

I would like to see a pic of the 30 dollar HEI.

[botboy]

Originally Posted by Frank_Zeller

I would like to see a pic of the 30 dollar HEI.

http://www.usfamily.net/web/botboy60/72C10/Truck4.bmp
Like that, only without cap and coil. I don't have any pictures of the unit removed from the truck, which I did when I upgraded that engine to TBI...

Originally Posted by 67ChevyC10Stepside

SWEET FREAKIN GUAGE! what size is that? can you get the rest of the set?

I would assume so, the gauge is made by Autotechnic and there are other autotechnic gauges on ebay, I scrounged ebay for hours trying to find one with a needle instead of a bunch of LED's cause I thought it would look out of place in my '72. 52MM = 2.047", about 2 1/16" in diameter. I have this in Ames with me so I could ship tomorrow if I were paid for it.

Originally Posted by Tx Firefighter

If I buy the distributor, when will you be able to ship it to me?

Right now its sitting in the garage of the friend who bought the engine out of my '72, I would give him 2-3 days to get it packaged and delivered to UPS or the post office.

[Frank_Zeller]

What are my payment options and where do I sent the money to?

Frank

[botboy]

my paypal addy is the same as my email, botboy60 (at) hot mail (dot) com, if you don't have paypal email me at that same address and I'll get you a physical address to send a money order to.

[Frank_Zeller]

Sent the money VIA paypal. Let me know after you ship the HEI. Thanks Frank