TH400 Front seal tool... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**COBALT** · 06-19-2002, 01:14 AM

There's a special GM tool for banging in the front pump seal on TH400's. What's the part number? Anyone?

Yes, I know about using a big socket, or pipe. I just need the GM number...

**oldiron** · 06-19-2002, 09:17 AM

Someone must have a Kent-Moore tool catolog.

If you have access to a shop manual from Chevy it might have it. If you don't get any response by the time I get home tonight I will look it up for you.
And you dont look like you ate the whole pizza. At least you didn't have to hold your pants up because your gut was forcing them down like mine did. LOL

**COBALT** · 06-19-2002, 12:01 PM

I got the Kent Moore catalog yesterday, and I'm not seeing it in there. Looks like tons of tools for anything 1998 and newer. I'm going to call them today.

Anyone else?

**oldiron** · 06-19-2002, 02:27 PM

Here are two options:
1 Part # YA322 seal driver kit from Snap On for $78
2 Small ball peen hammer from Sears $10 appox. and tap lightly around on the seal until it is seated.

**COBALT** · 06-19-2002, 02:31 PM

Screw option 1. I'll make my own tool before I spring for an entire set of drivers.

06-19-2002, 01:14 AM	#1
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	TH400 Front seal tool... There's a special GM tool for banging in the front pump seal on TH400's. What's the part number? Anyone? Yes, I know about using a big socket, or pipe. I just need the GM number... __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

06-19-2002, 09:17 AM	#2
oldiron Designated Grumpy Old Man Join Date: Oct 2001 Location: arlington, washington usa Posts: 3,094	Someone must have a Kent-Moore tool catolog. If you have access to a shop manual from Chevy it might have it. If you don't get any response by the time I get home tonight I will look it up for you. And you dont look like you ate the whole pizza. At least you didn't have to hold your pants up because your gut was forcing them down like mine did. LOL __________________ Never let the truth get in the way of a good story 71 Chev 1/2 ton 4X4 LWB Fleetside SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=361222 http://www.youtube.com/watch?v=1LgREwtDfaA 68 Chev 1 ton flat bed http://www.youtube.com/watch?v=0bO8szzlD4A 56 Chev Handyman Wagon http://www.youtube.com/watch?v=9y-6ddpBTkM http://www.youtube.com/watch?v=lbLzZ7zY8wA 56 Chev Belair http://67-72chevytrucks.com/vboard/s...d.php?t=410667 http://www.youtube.com/watch?v=xoW0Ei7ZNIg

06-19-2002, 12:01 PM	#3
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	I got the Kent Moore catalog yesterday, and I'm not seeing it in there. Looks like tons of tools for anything 1998 and newer. I'm going to call them today. Anyone else? __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

06-19-2002, 02:27 PM	#4
oldiron Designated Grumpy Old Man Join Date: Oct 2001 Location: arlington, washington usa Posts: 3,094	Here are two options: 1 Part # YA322 seal driver kit from Snap On for $78 2 Small ball peen hammer from Sears $10 appox. and tap lightly around on the seal until it is seated. __________________ Never let the truth get in the way of a good story 71 Chev 1/2 ton 4X4 LWB Fleetside SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=361222 http://www.youtube.com/watch?v=1LgREwtDfaA 68 Chev 1 ton flat bed http://www.youtube.com/watch?v=0bO8szzlD4A 56 Chev Handyman Wagon http://www.youtube.com/watch?v=9y-6ddpBTkM http://www.youtube.com/watch?v=lbLzZ7zY8wA 56 Chev Belair http://67-72chevytrucks.com/vboard/s...d.php?t=410667 http://www.youtube.com/watch?v=xoW0Ei7ZNIg

06-19-2002, 02:31 PM	#5
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Screw option 1. I'll make my own tool before I spring for an entire set of drivers. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.