1977 Blazer parts in D/FW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jonboy · 09-21-2004, 04:51 AM

I have finally decided to get a start on my Blazer, so I have some stuff I will need to clear out of the way. Please keep in mind I really do not want to ship; I have neither the time or patience.

Good, straight hood, 79-80 style. minor rust at teh lip, but it isn't kinked. Going with cowl hood. $40?

Front fenders, with inners. The only thing really wrong with them is they have the trim holes in them. I am not going with the trim. $25 each with inners?

pair of 77-later doors, cut for 73-75 top. Going with new doors as well. $20?

good dash pad for 73-80 dash, minor cracks. Has Cheyenne trim w/ac. $25?

Nice red low back buckets, with brackets. Have been recovered, but done pretty well. Also have complete red carpet set, including wheel wells. front and cargo areas look almost new. $100 for seats, and $25 for carpet.

Cracked red dash with new red cover. 73-80 style also. I didn't like the way the cover looked, but I might be too picky. $25.

headers for SBC. used, but in decent shape. Going with coated headers. $35.

Thinking of swapping to a pickup gate. If so, I have a complete (less trim band) gete with window, crank, hinges, straps, etc. $100.

73-75 top. It is a little rough, but looks like it has new door weatherstripping. $100. Going with soft top.

All prices are negotiable. I prefer local pickup, mainly because I work from 7AM to usually 7PM. It would never get shipped if it was left to me. I may be interested in trades also, depending on the item.

Thanks,
Jon

Blue Beard · 09-21-2004, 09:44 AM

Any pics of the gate..?

Jonboy · 09-21-2004, 01:22 PM

I will try to get pics of all of this stuff soon.

454K5 · 09-21-2004, 11:31 PM

I sent you a pm about the doors and hood.

ratrod67 · 09-22-2004, 07:24 PM

Pics of the buckets please.

Jonboy · 09-22-2004, 07:31 PM

I tried to put up pics last night, and I couldn't upload them for some reason. Please post up some e-mail addresses, and I will send pics.

ratrod67 · 09-22-2004, 07:40 PM

sent you PM

ItsNotABlazer · 09-22-2004, 11:49 PM

Jon if 454k5 does not get the doors I am interested in them. Assuming they are not rusted out or anything.

Might possibly be interested in the top and seats also. Pics to BSxpert@cox-internet.com please

Brad

blitz'd · 09-24-2004, 03:17 AM

Hey jon what headers are they? Long tubes?

Jonboy · 09-24-2004, 04:21 AM

Yeah. They are the ones on my truck now. If you can use tehm, let me know. I will probably be doing the whole exhaust, if you want it.

Primered_69 · 09-24-2004, 04:47 AM

If Blitzd does not want the headers I want them. Can meet this weekend or when ever you pull them.

09-21-2004, 04:51 AM	#1
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	1977 Blazer parts in D/FW I have finally decided to get a start on my Blazer, so I have some stuff I will need to clear out of the way. Please keep in mind I really do not want to ship; I have neither the time or patience. Good, straight hood, 79-80 style. minor rust at teh lip, but it isn't kinked. Going with cowl hood. $40? Front fenders, with inners. The only thing really wrong with them is they have the trim holes in them. I am not going with the trim. $25 each with inners? pair of 77-later doors, cut for 73-75 top. Going with new doors as well. $20? good dash pad for 73-80 dash, minor cracks. Has Cheyenne trim w/ac. $25? Nice red low back buckets, with brackets. Have been recovered, but done pretty well. Also have complete red carpet set, including wheel wells. front and cargo areas look almost new. $100 for seats, and $25 for carpet. Cracked red dash with new red cover. 73-80 style also. I didn't like the way the cover looked, but I might be too picky. $25. headers for SBC. used, but in decent shape. Going with coated headers. $35. Thinking of swapping to a pickup gate. If so, I have a complete (less trim band) gete with window, crank, hinges, straps, etc. $100. 73-75 top. It is a little rough, but looks like it has new door weatherstripping. $100. Going with soft top. All prices are negotiable. I prefer local pickup, mainly because I work from 7AM to usually 7PM. It would never get shipped if it was left to me. I may be interested in trades also, depending on the item. Thanks, Jon __________________ 1974 Jimmy- 5.3/4L80e/NP241

09-21-2004, 09:44 AM	#2
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Any pics of the gate..? __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

09-21-2004, 01:22 PM	#3
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	I will try to get pics of all of this stuff soon. __________________ 1974 Jimmy- 5.3/4L80e/NP241

09-22-2004, 07:31 PM	#6
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	I tried to put up pics last night, and I couldn't upload them for some reason. Please post up some e-mail addresses, and I will send pics. __________________ 1974 Jimmy- 5.3/4L80e/NP241

09-22-2004, 11:49 PM	#8
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	Jon if 454k5 does not get the doors I am interested in them. Assuming they are not rusted out or anything. Might possibly be interested in the top and seats also. Pics to BSxpert@cox-internet.com please Brad __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

09-21-2004, 11:31 PM	#4
454K5 Registered User Join Date: Jan 2004 Location: Ft. Worth, TX Posts: 19	I sent you a pm about the doors and hood.

09-22-2004, 07:24 PM	#5
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	Pics of the buckets please.

09-22-2004, 07:40 PM	#7
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	sent you PM

09-24-2004, 03:17 AM	#9
blitz'd vintage car junkie Join Date: Aug 2004 Location: DFW Posts: 217	Hey jon what headers are they? Long tubes? __________________ 1950 chevy truck, s10 swap, bagged, v8, 18s My build: http://67-72chevytrucks.com/vboard/s...d.php?t=392761

09-24-2004, 04:21 AM	#10
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Yeah. They are the ones on my truck now. If you can use tehm, let me know. I will probably be doing the whole exhaust, if you want it. __________________ 1974 Jimmy- 5.3/4L80e/NP241

09-24-2004, 04:47 AM	#11
Primered_69 Registered User Join Date: Sep 2002 Location: Fort Worth Posts: 1,409	If Blitzd does not want the headers I want them. Can meet this weekend or when ever you pull them. __________________ 1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.