69 C-30 For Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hotrodhenryj · 08-25-2004, 11:18 AM

Factory dually that originally had a BB, now has 350/4 speed. Runs and drives, motor sounds great except for exhaust leak. Has oil leak at one valve cover, trans wines. Very small amount of rust starting in pass side rocker and under the heater in rocker. The rest is nice no rust or damage. The cab has the factory roof clearance light stands, but the sun got to the lenses. All glass is good except pass door. The bed is from a Longhorn that I parted and is just sitting on the frame. I did this because I had no place to store it. It does fit the wheel wells and could be bolted on and look like it belongs there.The price is 1000. (with or without the bed) as any truck that is a driver with minimal rust should be worth that. I think the truck could make a 3-4 hundred mile trip with no issue. My only concern is the tires are thin. I have some better ones here that I will install if the buyer decides to drive it home. Here is a pic, feel free to ask questions and will get more pics as requested. As always I will trade part for something I can use. I will deliver for one dollar a loaded mile to any bordering state.

**CPNE** · 08-25-2004, 02:10 PM

Chuck, If it gets parted out, I'd be interested in some parts

Huskerboy2 · 08-25-2004, 03:51 PM

Darn it. I've been looking for a C30 dually. I would be all over it, except I don't know how I would get it to Austin.

matt67350 · 08-25-2004, 03:55 PM

I have one in Ft Worth Tx 76180

Hotrodhenryj · 08-25-2004, 04:15 PM

Jeff: I will part it but the chassis has to go first. Anyone just interested in that email me.

Huskerboy2: Drive it!!!

matt67350: Feel free to post pics of your truck if you like

**CPNE** · 08-25-2004, 04:27 PM

Quote:

Originally Posted by Hotrodhenryj

Jeff: I will part it but the chassis has to go first. Anyone just interested in that email me.

Chuck,

I interested in duallie rims if 16 inch and not split rims, lug nuts (yes the lug nuts), driveshaft, tranny x-member, driveshaft carrier bearing mount cross member, and motor mounts (if original BB ones)

teeitup · 08-25-2004, 04:33 PM

NIce truck Chuck, looks like a bargain to me. If you and I were only closer.

Robert1970C20rstbukt · 08-25-2004, 11:10 PM

Sweet truck! I'm gonna convert mine to a dually later on.

I just bought new tires a couple weeks ago so it's gotta wait.

Hotrodhenryj · 08-26-2004, 05:56 PM

I will part this if there is enough interest, otherwise feel free to make offer or trade for something I can use. I have way to many trucks here to ever get to this one.

Hotrodhenryj · 08-31-2004, 09:32 PM

I am going to part this truck as there has been some interest in the parts.

Front clip 400.
Cab/doors 500.
Longhorn bed 200.
350 motor 150.

Anything else you see, email me

Will keep it complete untill cab or front clip sells, then all is fair game.

Robert1970C20rstbukt · 08-31-2004, 10:02 PM

Man someone needs to buy this truck!

**kwmech** · 08-31-2004, 11:23 PM

Quote:

Originally Posted by CPNE

Chuck,

I interested in duallie rims if 16 inch and not split rims, lug nuts (yes the lug nuts), driveshaft, tranny x-member, driveshaft carrier bearing mount cross member, and motor mounts (if original BB ones)

The rims, if still 69 will have the 1/2 wheel stud holes. I had this problem on my GMC when I converted to disc.

Hotrodhenryj · 09-01-2004, 12:51 AM

700. come and get it!!!!!

**CPNE** · 09-01-2004, 07:37 AM

Quote:

Originally Posted by kwmech

The rims, if still 69 will have the 1/2 wheel stud holes. I had this problem on my GMC when I converted to disc.

Not a problem, I have a 67 1 ton

**JDL** · 09-02-2004, 08:50 PM

Could you send me some more pics. I was looking at this at work today and one the guys nows of a guy that might haul it here at a good price.

Hotrodhenryj · 09-03-2004, 12:39 PM

JDL: Pics sent

bad_turbo · 10-02-2004, 10:14 PM

did you ever sell your dually?

Hotrodhenryj · 10-03-2004, 11:14 AM

Truck is still here. I took a deposit and guy was to pay the balance last month, on the 27th. I am giving him another week or so, then it up for grabs again.

bad_turbo · 10-03-2004, 12:22 PM

does anybody know how many factory duallys were made in '69. Just curious.

08-25-2004, 11:18 AM	#1
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	69 C-30 For Sale Factory dually that originally had a BB, now has 350/4 speed. Runs and drives, motor sounds great except for exhaust leak. Has oil leak at one valve cover, trans wines. Very small amount of rust starting in pass side rocker and under the heater in rocker. The rest is nice no rust or damage. The cab has the factory roof clearance light stands, but the sun got to the lenses. All glass is good except pass door. The bed is from a Longhorn that I parted and is just sitting on the frame. I did this because I had no place to store it. It does fit the wheel wells and could be bolted on and look like it belongs there.The price is 1000. (with or without the bed) as any truck that is a driver with minimal rust should be worth that. I think the truck could make a 3-4 hundred mile trip with no issue. My only concern is the tires are thin. I have some better ones here that I will install if the buyer decides to drive it home. Here is a pic, feel free to ask questions and will get more pics as requested. As always I will trade part for something I can use. I will deliver for one dollar a loaded mile to any bordering state. Attached Images __________________ Arizona rust free sheetmetal Last edited by Hotrodhenryj; 08-25-2004 at 11:36 AM.

08-25-2004, 02:10 PM	#2
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Chuck, If it gets parted out, I'd be interested in some parts __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

08-25-2004, 03:51 PM	#3
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Darn it. I've been looking for a C30 dually. I would be all over it, except I don't know how I would get it to Austin. __________________ '72 Chevy Blazer

08-25-2004, 03:55 PM	#4
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	I have one in Ft Worth Tx 76180 __________________ 69 swb stepside, rebuild and upgrade in progress

08-25-2004, 04:15 PM	#5
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Jeff: I will part it but the chassis has to go first. Anyone just interested in that email me. Huskerboy2: Drive it!!! matt67350: Feel free to post pics of your truck if you like __________________ Arizona rust free sheetmetal

08-25-2004, 04:33 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	NIce truck Chuck, looks like a bargain to me. If you and I were only closer. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-25-2004, 11:10 PM	#8
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Sweet truck! I'm gonna convert mine to a dually later on. I just bought new tires a couple weeks ago so it's gotta wait. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

08-26-2004, 05:56 PM	#9
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	I will part this if there is enough interest, otherwise feel free to make offer or trade for something I can use. I have way to many trucks here to ever get to this one. __________________ Arizona rust free sheetmetal

08-31-2004, 09:32 PM	#10
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	I am going to part this truck as there has been some interest in the parts. Front clip 400. Cab/doors 500. Longhorn bed 200. 350 motor 150. Anything else you see, email me Will keep it complete untill cab or front clip sells, then all is fair game. __________________ Arizona rust free sheetmetal

08-31-2004, 10:02 PM	#11
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Man someone needs to buy this truck! __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

09-01-2004, 12:51 AM	#13
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	700. come and get it!!!!! __________________ Arizona rust free sheetmetal

09-02-2004, 08:50 PM	#15
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,844	Could you send me some more pics. I was looking at this at work today and one the guys nows of a guy that might haul it here at a good price. __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

09-03-2004, 12:39 PM	#16
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	JDL: Pics sent __________________ Arizona rust free sheetmetal

10-02-2004, 10:14 PM	#17
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	did you ever sell your dually? __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

10-03-2004, 11:14 AM	#18
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Truck is still here. I took a deposit and guy was to pay the balance last month, on the 27th. I am giving him another week or so, then it up for grabs again. __________________ Arizona rust free sheetmetal



Register or Log In To remove these advertisements.

10-03-2004, 12:22 PM	#19
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	does anybody know how many factory duallys were made in '69. Just curious. __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

Register or Log In To remove these advertisements.