The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-04-2004, 09:58 AM   #1
muddyole 69
Senior Member
 
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
Tpi

I know this probably has been asked a million times so please point me in the direction of the most detailed thread I wanna try TPI on my 70 and want to know the best donor and what all i need to pull from the donor car and any tips to make it easy for those of us who think anything after 79 is a late model thanks Mike
__________________
hav'n fun be'n me
muddyole 69 is offline   Reply With Quote
Old 10-04-2004, 10:03 AM   #2
CHEVYE
my gas saver
 
CHEVYE's Avatar
 
Join Date: Sep 2003
Location: Clarksville, TN
Posts: 2,046
there`s a guy with one on here that goes by the name grendel i believe. he has an 86` model one which will work with older style cyl. heads. i think he wanted $350 for it. that was with harness, dist, ecm and all the good stuff to get it going too. that`s a good deal and if i had some extra $$$ i would get it in a heartbeat. i sold my similar set up on ebay a few months back for $750 so his price is a super deal, good luck, eric.
__________________
85' SWB, 4.3/TH350, getting ready for paint
84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black
71`SWB, project
ebay feedback
CHEVYE is offline   Reply With Quote
Old 10-04-2004, 10:30 AM   #3
neonlarry
Registered User
 
neonlarry's Avatar
 
Join Date: Feb 2002
Location: Vacaville, CA
Posts: 2,745
Check out this post near the bottom.
http://207.44.196.117/vboard/showthread.php3?t=121780
__________________
70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights
99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs
95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI
neonlarry is offline   Reply With Quote
Old 10-04-2004, 10:46 AM   #4
CHEVYE
my gas saver
 
CHEVYE's Avatar
 
Join Date: Sep 2003
Location: Clarksville, TN
Posts: 2,046
if you do go with the tpi, try to get it as complete as possible (press reg. pump, lines, wiring, sensors etc.). there`s nothing worse than hunting down a bunch of nick nack $5 dollar parts. i think in 87 or 88 they went to the diff. lower intake for newer heads, but the only diff is the center bolt to the head and it can be elongated or modified. the set up for sale on the board should be a direct bolt up for pre-86 heads. you will most likely have to have the ecm reprogrammed/tweaked, and you don`t want to run any type of radical cam/porting or anything of that nature.
__________________
85' SWB, 4.3/TH350, getting ready for paint
84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black
71`SWB, project
ebay feedback
CHEVYE is offline   Reply With Quote
Old 10-04-2004, 10:49 AM   #5
CHEVYE
my gas saver
 
CHEVYE's Avatar
 
Join Date: Sep 2003
Location: Clarksville, TN
Posts: 2,046
here ya go. http://67-72chevytrucks.com/vboard/s....php3?t=121702
__________________
85' SWB, 4.3/TH350, getting ready for paint
84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black
71`SWB, project
ebay feedback
CHEVYE is offline   Reply With Quote
Old 10-04-2004, 12:58 PM   #6
Russell
Professional Grade
 
Russell's Avatar
 
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
If you do decide to go with a TPI -- I'd suggest an 86 setup. It still has the big cap style HEI, and will fit your heads. You'll have to get the ECM reprogrammed to a 350 setup unless you score a TPI from an 86 Corvette.

Like was said earlier, the absolute cheapest way to do this is to go and buy an 86 TPI car, I bought "complete" setup off ebay, and have been nickled and dimed to death buying small things that it didn't come with.

PS -- Avoid the 85 setup like the plauge unless you are willing to change the ECM...

On that note, if you want to swap ECMs, there is a very very nice looking, and very completely setup on ebay right now, with a buy it now of 400, extremely good deal, and in extremely good shape.
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)
Russell is offline   Reply With Quote
Old 10-04-2004, 01:45 PM   #7
muddyole 69
Senior Member
 
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
Tpi

I love this board !! thanks a million guys Mike
__________________
hav'n fun be'n me
muddyole 69 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:24 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com