Putting Dana 60 in my 68..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C/20inCA · 10-05-2004, 01:32 PM

I found a Dana 60 rear end with 3:54's in it out of a 72 3/4 ton. That'll be much better than the 4:56's that are in there now. Especially since i put a Muncie 4 speed in it. Since i don't need the old one, what should i do with it? The drums are good, along with everything else.

da-burb · 10-05-2004, 02:23 PM

If you have the room, keep the drums and the center section. You will find someone in need of the drums and bearings(the real expensive parts to replace). Toss/recycle the rest.

10-05-2004, 01:32 PM	#1
C/20inCA Registered User Join Date: Mar 2004 Location: San Jose, CA Posts: 12	Putting Dana 60 in my 68..... I found a Dana 60 rear end with 3:54's in it out of a 72 3/4 ton. That'll be much better than the 4:56's that are in there now. Especially since i put a Muncie 4 speed in it. Since i don't need the old one, what should i do with it? The drums are good, along with everything else.

10-05-2004, 02:23 PM	#2
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	If you have the room, keep the drums and the center section. You will find someone in need of the drums and bearings(the real expensive parts to replace). Toss/recycle the rest. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.