4x4 Chassis Parts, Mounts and Perches 4 Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ljbear · 10-01-2004, 09:33 PM

Finally got this all stripped down. All chassis brackets and cross members are there except the Transmission x-member. Spring perches, motor cradle, body mounts are all there. Let me know what you need. Tub is all gone nothing left. These parts will work on a truck or blazer, except the rear cab mounts and rocker box ends, which are blazer parts.

Rocker Box End Caps, both in great shape, with most of the original fasteners. Sold (TeamHarvey)

Front Spring perches, forward pair with Radiator support base SOLD (Bob in Chico)
Front Spring Perch, Rear Swivels SOLD (Bob in Chico)

Rear Spring Perches, Forward Spring mounts, SOLD (Jims70)
Rear Spring Perches, Rear Spring Swivels, SOLD (norville)
Rear Upper Shock Mounts, $15 Pair
Rear Bump Stop Brackets. $15 Pair

Front Cab Mounts, $15 Pair
Rear Cab Mounts, Blazer only, $15 Pair
Blazer Bed Mounts, 4 pieces, $20

Front Crossmember, $20
V8 Engine Cradle, Sold (OhioChevy)
Steering Box Reinforcement Plate, $25
Transfer Case Torque Mount, Sold (Cheyenne 10)
Intermediate Cross Member, Sold (Zoomy)
Rear Cross Member, $15

All prices + shipping.

I do have a PayPal account. I'll mark items sold and note to who, if you don't wan't your name noted please let me know, just my way of keeping track of what's going where.

norville · 10-01-2004, 10:00 PM

PM sent "Rear Spring Perches, Rear Spring Swivels, $20 Pair"

norville

ZOOMY · 10-02-2004, 02:21 AM

I need the big crossmember for a K20. It's the one that is near the front set of rear spring perches. Would that be the same as a Blazer ? Is the tube grill still available ? How much for the alternator & adjuster bracket ? Also the air cleaner if it's for a 4 barrel.It looks fairly new. How about those mirror mounts ? Do you also have the backing plates for them ?......Thanks...........Zoomy

**JIMs70GMC** · 10-02-2004, 04:55 AM

Hey Larry, forgot all about your 4x4 frame. I'll take those front spring hangers for the rear springs.

**CUSTOM/10** · 10-02-2004, 07:06 AM

I need the cross member that goes under the trans/tranfer case adapter. One that came from a blazer/truck that had a np205 in it.

I also could use a rear cab mount for a "TRUCK" if you have any kicking around.

Gary

ljbear · 10-02-2004, 09:43 AM

Zoomy, I'm not sure. If you can get a dimension I'll check it, these are the same as the K10's so I figured they would be the same. I'll pm on the rest of the parts.

Jims70GMC, rear fronts are yours. PM your address with a phone #, I'll get back to you on the shipping.

Custom 10, that cross member is gone and no truck rear cab mounts right now. I might be parting another blazer, so I could have a cross member available. If you can wait let me know, I'll put your name on it.

**CUSTOM/10** · 10-02-2004, 10:34 AM

Put my name on the next cross member that you get, and in the mean time let me know what the shipping would be to NH 03873 .

Gary

**JIMs70GMC** · 10-02-2004, 10:37 AM

pm sent.

ljbear · 10-03-2004, 09:11 AM

ttt

ZOOMY · 10-05-2004, 02:31 AM

You have a PM on some parts.

ljbear · 10-05-2004, 02:00 PM

Zoomy here's the cross member. It measures 8 1/2" wide, and would fit between 5" frame rails. Sent you a PM on the other stuff.

ljbear · 10-07-2004, 12:07 AM

Ttt

Blue_71 · 10-07-2004, 08:59 AM

did it happen to have about a 4 inch lift? if it did, what would you want for the front springs and drop steering arm?

ljbear · 10-07-2004, 11:12 AM

Sorry, No 4" lift or arm. May be able to get a set of 2 -2 1/2" springs for you if I end up parting the blazer I'm trying to sell

10-01-2004, 09:33 PM	#1
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	4x4 Chassis Parts, Mounts and Perches 4 Sale Finally got this all stripped down. All chassis brackets and cross members are there except the Transmission x-member. Spring perches, motor cradle, body mounts are all there. Let me know what you need. Tub is all gone nothing left. These parts will work on a truck or blazer, except the rear cab mounts and rocker box ends, which are blazer parts. Rocker Box End Caps, both in great shape, with most of the original fasteners. Sold (TeamHarvey) Front Spring perches, forward pair with Radiator support base SOLD (Bob in Chico) Front Spring Perch, Rear Swivels SOLD (Bob in Chico) Rear Spring Perches, Forward Spring mounts, SOLD (Jims70) Rear Spring Perches, Rear Spring Swivels, SOLD (norville) Rear Upper Shock Mounts, $15 Pair Rear Bump Stop Brackets. $15 Pair Front Cab Mounts, $15 Pair Rear Cab Mounts, Blazer only, $15 Pair Blazer Bed Mounts, 4 pieces, $20 Front Crossmember, $20 V8 Engine Cradle, Sold (OhioChevy) Steering Box Reinforcement Plate, $25 Transfer Case Torque Mount, Sold (Cheyenne 10) Intermediate Cross Member, Sold (Zoomy) Rear Cross Member, $15 All prices + shipping. I do have a PayPal account. I'll mark items sold and note to who, if you don't wan't your name noted please let me know, just my way of keeping track of what's going where. __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability" Last edited by ljbear; 10-19-2004 at 12:51 AM.

10-01-2004, 10:00 PM	#2
norville Senior Member Join Date: Jun 2004 Location: Mountain Top, Pa Posts: 323	PM sent "Rear Spring Perches, Rear Spring Swivels, $20 Pair" norville __________________ 1986 C10 Scottsdale 5.3, TH400

10-02-2004, 02:21 AM	#3
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	K20 x-member I need the big crossmember for a K20. It's the one that is near the front set of rear spring perches. Would that be the same as a Blazer ? Is the tube grill still available ? How much for the alternator & adjuster bracket ? Also the air cleaner if it's for a 4 barrel.It looks fairly new. How about those mirror mounts ? Do you also have the backing plates for them ?......Thanks...........Zoomy Last edited by ZOOMY; 10-02-2004 at 06:19 AM.

10-02-2004, 04:55 AM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Hey Larry, forgot all about your 4x4 frame. I'll take those front spring hangers for the rear springs. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

10-02-2004, 07:06 AM	#5
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,850	Cross member I need the cross member that goes under the trans/tranfer case adapter. One that came from a blazer/truck that had a np205 in it. I also could use a rear cab mount for a "TRUCK" if you have any kicking around. Gary

10-02-2004, 09:43 AM	#6
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Zoomy, I'm not sure. If you can get a dimension I'll check it, these are the same as the K10's so I figured they would be the same. I'll pm on the rest of the parts. Jims70GMC, rear fronts are yours. PM your address with a phone #, I'll get back to you on the shipping. Custom 10, that cross member is gone and no truck rear cab mounts right now. I might be parting another blazer, so I could have a cross member available. If you can wait let me know, I'll put your name on it. __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

10-02-2004, 10:34 AM	#7
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,850	Cross member Put my name on the next cross member that you get, and in the mean time let me know what the shipping would be to NH 03873 . Gary

10-02-2004, 10:37 AM	#8
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	pm sent. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

10-03-2004, 09:11 AM	#9
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	ttt __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

10-05-2004, 02:31 AM	#10
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	Pm You have a PM on some parts.

10-05-2004, 02:00 PM	#11
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Picture for Zoomy Zoomy here's the cross member. It measures 8 1/2" wide, and would fit between 5" frame rails. Sent you a PM on the other stuff. Attached Images __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability" Last edited by ljbear; 10-05-2004 at 02:07 PM.

10-07-2004, 12:07 AM	#12
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Ttt __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

10-07-2004, 08:59 AM	#13
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,283	did it happen to have about a 4 inch lift? if it did, what would you want for the front springs and drop steering arm?

10-07-2004, 11:12 AM	#14
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Sorry, No 4" lift or arm. May be able to get a set of 2 -2 1/2" springs for you if I end up parting the blazer I'm trying to sell __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.