71 GMC SWB Leaf Spring Frame w/ Good A/C Cab for Sale Cheap in DFW Area - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smonty · 09-30-2004, 01:55 PM

I have a cab and frame I need to get moved so will sell it el cheapo! The frame is a SWB 5 lug front disc brake factory leaf spring frame. The cab is an uncut dash, A/C that needs corners and rockers. Doors are also good on the cab with some rust where the bottoms meet the rockers. $350.00 takes it. I am trying to get all my parts moved from the farm and this is something I do not want to store.

Thanks for looking!

Ernie

matt67350 · 09-30-2004, 02:24 PM

Hey Ernie Will you sell the pipes off that thing.

krazy_texan · 09-30-2004, 05:46 PM

if you take a rain check on the money i will come and get it next week. lol.

smonty · 10-01-2004, 01:33 PM

What Pipes Matthew? HEHE!! I did not even notice. You are welcome to any that are on it.

Krazy Texan - Let me know when you could pay me for it.

Ernie

smonty · 10-02-2004, 10:57 PM

To The Top Again

Chevy Muscle · 10-02-2004, 11:02 PM

Where in DFdubya are you?

smonty · 10-03-2004, 11:49 AM

The frame and cab are located in Kemp, TX which is approximately 1 hour southeast of downtown Dallas via HWY US 175 East.

Ernie

smonty · 10-04-2004, 07:17 PM

2 The Top Again

incoma · 10-05-2004, 10:00 PM

ttt

Got any other parts for this truck? Just the cab, doors, and rolling frame?

smonty · 10-06-2004, 02:18 PM

I have a set of fenders and a nice hood also. Have a stepside bed too.

Ernie

Zumo · 10-06-2004, 03:16 PM

Damn.

saulgoode · 10-06-2004, 03:24 PM

Got any pics of the cab? And is it SWB syep side, or fleetside, or do those use the same frame.

Intrested,
Saulgoode

incoma · 10-06-2004, 04:16 PM

ditto the pic request. jroy3@jam.rr.com

dallas71 · 10-06-2004, 04:32 PM

Does the stepside bed have a tailgate??? Also need a stepside brace...

smonty · 10-07-2004, 01:49 PM

Hey Randall,

I have your brace. I need to meet you to get the seatbelts coz I found the other belt I needed to make the set and get them shipped to a buyer.

Ernie

doug72 · 10-07-2004, 08:48 PM

Do you still have the truck? I PMed you a while back.

Doug

superchevy · 10-07-2004, 09:19 PM

Hey Ernie,
Still have that hood?

smonty · 10-08-2004, 12:53 AM

Doug, I still have the truck but have not had a chance to take any pictures of it.

Casey, The hood was gone the other day and I thought you might have picked it up. Let me look around and see if it is still at the farm. Since I am in Frisco now I could drop it off at your shop.

Ernie

doug72 · 10-08-2004, 09:27 AM

I'm interested in the whole thing. I am in Carrolton. I can pay for it as soon as I see it. Will be out of town this weekend. Please send me some pics and let me know when we can go see it.

Thanks,

Doug

superchevy · 10-08-2004, 09:57 AM

Hi Ernie,
That would be fine, except I've already moved to Austin; however, my bodyman's still working on the truck's body, and he works at the Crest Cadillac bodyshop located there at Parker & 75 Central. You could drop it off there at the bodyshop. His name is Jake. Give me a couple of dates when you might make it, and I'll call him and let him know you're coming by.
Thanks,
Casey

09-30-2004, 01:55 PM	#1
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	71 GMC SWB Leaf Spring Frame w/ Good A/C Cab for Sale Cheap in DFW Area I have a cab and frame I need to get moved so will sell it el cheapo! The frame is a SWB 5 lug front disc brake factory leaf spring frame. The cab is an uncut dash, A/C that needs corners and rockers. Doors are also good on the cab with some rust where the bottoms meet the rockers. $350.00 takes it. I am trying to get all my parts moved from the farm and this is something I do not want to store. Thanks for looking! Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

09-30-2004, 02:24 PM	#2
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	pipes Hey Ernie Will you sell the pipes off that thing. __________________ 69 swb stepside, rebuild and upgrade in progress

09-30-2004, 05:46 PM	#3
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	if you take a rain check on the money i will come and get it next week. lol. __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

10-01-2004, 01:33 PM	#4
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	To The Top What Pipes Matthew? HEHE!! I did not even notice. You are welcome to any that are on it. Krazy Texan - Let me know when you could pay me for it. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

10-02-2004, 10:57 PM	#5
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	To Z Top To The Top Again __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

10-02-2004, 11:02 PM	#6
Chevy Muscle < 69 Blazer Join Date: Mar 2004 Location: Nevada, TX Posts: 293	Where in DFdubya are you?

10-03-2004, 11:49 AM	#7
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Reply to Chevy Muscle The frame and cab are located in Kemp, TX which is approximately 1 hour southeast of downtown Dallas via HWY US 175 East. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

10-04-2004, 07:17 PM	#8
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	2 Da Top 2 The Top Again __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

10-05-2004, 10:00 PM	#9
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	ttt Got any other parts for this truck? Just the cab, doors, and rolling frame?

10-06-2004, 02:18 PM	#10
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Reply to incoma I have a set of fenders and a nice hood also. Have a stepside bed too. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

10-06-2004, 03:16 PM	#11
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Damn. __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

10-06-2004, 03:24 PM	#12
saulgoode Registered User Join Date: Dec 2003 Location: Houston Posts: 388	Got any pics of the cab? And is it SWB syep side, or fleetside, or do those use the same frame. Intrested, Saulgoode

10-06-2004, 04:16 PM	#13
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	ditto the pic request. jroy3@jam.rr.com

10-06-2004, 04:32 PM	#14
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	Does the stepside bed have a tailgate??? Also need a stepside brace... __________________ My 1966 LWB Truck My 1966 SWB Truck

10-07-2004, 01:49 PM	#15
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Reply to Dallas71 Hey Randall, I have your brace. I need to meet you to get the seatbelts coz I found the other belt I needed to make the set and get them shipped to a buyer. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project



Register or Log In To remove these advertisements.

10-07-2004, 08:48 PM	#16
doug72 Registered User Join Date: Mar 2003 Location: Plano, Tx Posts: 59	PMed you a while back Do you still have the truck? I PMed you a while back. Doug __________________ http://67-72chevytrucks.com/cc1972_25.html

10-07-2004, 09:19 PM	#17
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Hey Ernie, Still have that hood? __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

10-08-2004, 12:53 AM	#18
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Reply to Doug72 and superchevy Doug, I still have the truck but have not had a chance to take any pictures of it. Casey, The hood was gone the other day and I thought you might have picked it up. Let me look around and see if it is still at the farm. Since I am in Frisco now I could drop it off at your shop. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

10-08-2004, 09:27 AM	#19
doug72 Registered User Join Date: Mar 2003 Location: Plano, Tx Posts: 59	the whole thing I'm interested in the whole thing. I am in Carrolton. I can pay for it as soon as I see it. Will be out of town this weekend. Please send me some pics and let me know when we can go see it. Thanks, Doug __________________ http://67-72chevytrucks.com/cc1972_25.html

10-08-2004, 09:57 AM	#20
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Hi Ernie, That would be fine, except I've already moved to Austin; however, my bodyman's still working on the truck's body, and he works at the Crest Cadillac bodyshop located there at Parker & 75 Central. You could drop it off there at the bodyshop. His name is Jake. Give me a couple of dates when you might make it, and I'll call him and let him know you're coming by. Thanks, Casey __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

Register or Log In To remove these advertisements.