I will pay for this info (70 C/10) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Truckhead · 10-01-2004, 06:01 PM

Having no luck (except for one helpful comment) on this problem, I will send $10 Paypal to anyone who can give me an understandable schematic of:

70 C/10
Wiring for stock 2 speed wipers from input at the wiper switch to the connectors to the motor.

Basically, I have the connectors going into the wiper motor in a box. Since the motor is mounted, I think there are 3 places to plug in. Hard to tell.

I have the wiper switch in that box. I believe the dark blue wire (center one of the 3) feeds power into the switch. That leaves 2 output connectors there. I need to know how to wire it up.

Thanks, Paul

*FormerMember* · 10-01-2004, 06:04 PM

Not sure if this helps:

*FormerMember* · 10-01-2004, 06:05 PM

No picture attached?

cdowns · 10-01-2004, 06:09 PM

i fail to see how a taillight wiring diagram is going to help his wipers

*FormerMember* · 10-01-2004, 06:12 PM

Quote:

Originally Posted by cdowns

i fail to see how a taillight wiring diagram is going to help his wipers

Look at the diagram above it...

cdowns · 10-01-2004, 06:18 PM

Quote:

Originally Posted by grendel

Look at the diagram above it...

nice engine compartment diagram !! still notjing with the wipers ,try one more time

cdowns · 10-01-2004, 06:43 PM

OK looking at the wiper switch youve got 3terminals in line 2close to each the other off by itself the lonely terminal gets ltblue the middle dkblue the other outside one is blackie
now lookin at the wiper and washer assy on the back there's 2 terminals dark blue on top then there's a yellow that comes from the fuse box with 2 plugs 1 goes on the bottom ,then on the right side of the pump there's 3termilals from back to front first goes blakie then lt blue then yellow

if this makes sence to you and it gets your wipers runnin send the $10 to josh for board upkeep

Tx Firefighter · 10-01-2004, 06:47 PM

Someone give him the info he wants and make him send the 10 bucks to Josh to support this place instead.

cdowns · 10-01-2004, 06:58 PM

Quote:

Originally Posted by Tx Firefighter

Someone give him the info he wants and make him send the 10 bucks to Josh to support this place instead.

HAJAHHA I BEAT U TO IT !!!!

*FormerMember* · 10-01-2004, 06:59 PM

I am looking for the cab schematic I had...

That was my plan, to send the money to Josh.

neonlarry · 10-01-2004, 07:18 PM

Check here:
http://www.geocities.com/chevroletc1070/instrum2.html

Truckhead · 10-10-2004, 08:52 PM

Thanks CDowns!
Sorry I didn't get back sooner.

68C15 · 10-10-2004, 10:42 PM

FYI, the switch grounds the ckt. & supplies power for washer.

10-01-2004, 06:01 PM	#1
Truckhead 18436572 Join Date: Aug 2003 Location: Waynesboro, Va. Posts: 488	I will pay for this info (70 C/10) Having no luck (except for one helpful comment) on this problem, I will send $10 Paypal to anyone who can give me an understandable schematic of: 70 C/10 Wiring for stock 2 speed wipers from input at the wiper switch to the connectors to the motor. Basically, I have the connectors going into the wiper motor in a box. Since the motor is mounted, I think there are 3 places to plug in. Hard to tell. I have the wiper switch in that box. I believe the dark blue wire (center one of the 3) feeds power into the switch. That leaves 2 output connectors there. I need to know how to wire it up. Thanks, Paul

10-01-2004, 06:04 PM	#2
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Not sure if this helps: Last edited by FormerMember; 10-04-2007 at 06:32 PM.

10-01-2004, 06:05 PM	#3
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	No picture attached? Last edited by FormerMember; 10-04-2007 at 06:32 PM.

10-01-2004, 06:09 PM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	i fail to see how a taillight wiring diagram is going to help his wipers __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-01-2004, 06:43 PM	#7
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	OK looking at the wiper switch youve got 3terminals in line 2close to each the other off by itself the lonely terminal gets ltblue the middle dkblue the other outside one is blackie now lookin at the wiper and washer assy on the back there's 2 terminals dark blue on top then there's a yellow that comes from the fuse box with 2 plugs 1 goes on the bottom ,then on the right side of the pump there's 3termilals from back to front first goes blakie then lt blue then yellow if this makes sence to you and it gets your wipers runnin send the $10 to josh for board upkeep __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-01-2004, 06:47 PM	#8
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Someone give him the info he wants and make him send the 10 bucks to Josh to support this place instead. __________________ I'm on the Instagram- @Gearhead_Kevin

10-01-2004, 06:59 PM	#10
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	I am looking for the cab schematic I had... That was my plan, to send the money to Josh.

10-01-2004, 07:18 PM	#11
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	Check here: http://www.geocities.com/chevroletc1070/instrum2.html __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI Last edited by neonlarry; 10-01-2004 at 07:20 PM.

10-10-2004, 08:52 PM	#12
Truckhead 18436572 Join Date: Aug 2003 Location: Waynesboro, Va. Posts: 488	Thanks CDowns! Sorry I didn't get back sooner.

10-10-2004, 10:42 PM	#13
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	FYI, the switch grounds the ckt. & supplies power for washer. __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.