Aaaaaaaaaaaaaaahhhhhhhhhhhhhhh!!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Low69CST · 06-23-2002, 01:13 AM

One of my friends came up with the neat idea of putting tweeters in my sun visors. I thought it sounded cool. But then it came time to fish speaker wire from the sunvisor hole in the top all the way to the back trhough the piller, where my gastank use to be and my new amps are going. TALK ABOUT A PAIN IN THE BUTT. It took me 2 hours to do the one on the passenger side and I'm still not done with the drivers side. I'm using this steal strip for fishing things through tight spots. It keeps getting hung up on the drivers side. I've got it hung up in something right now and I can't push it through or pull it back. It just hangs up on something. I fooled with it for like 2 hours and still can't get it unhooked from whatever is hanging it up. I might have to cut it off because I don't see myself getting this unhooked. Its seriously pissing me off! Sorry just had to vent some.

*Fast68Chevy* · 06-23-2002, 03:00 AM

probably is getting pinched into pinch welds i bet you,

Longhorn Man · 06-23-2002, 11:10 AM

in the sunisors? You won't be able to block the sun wihout altering the sound of the tunes.
You know the highs should be within 8 inches (i think) of your mids for best sound quality, right?

Slammed67 · 06-23-2002, 11:54 AM

Here's how I used to have mine mounted..... Sounded pretty good

Low69CST · 06-23-2002, 03:05 PM

Fast:
Yeah There are the pinch welds in the seam just above the dome light that it might be catching on. There are also double pannels up there that it might be hanging off of. My dad has a junk A/C cab that we cut the roof off of. Theres lots of little lips and stuff that could hang up this fisher line i've been using.

Longhorn:
I'll have enough wire that i'll be able to move the sunvisors around if I need to. But I never move my sunvisors. I think i maybe have 3 times in the 7 years i've been driving. I'm trying to create the best speaker systems without taking a saws all to my truck. I'm not too sure where i'll put the mids. May not be the closest for the best sound but I'll have something inconspicuous throw some sound from the front.

Slammed those tweeters look pretty good sitting there. Thats the shoulder bolt holes right? Never thought of putting them there.

06-23-2002, 01:13 AM	#1
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	Aaaaaaaaaaaaaaahhhhhhhhhhhhhhh!!!!! One of my friends came up with the neat idea of putting tweeters in my sun visors. I thought it sounded cool. But then it came time to fish speaker wire from the sunvisor hole in the top all the way to the back trhough the piller, where my gastank use to be and my new amps are going. TALK ABOUT A PAIN IN THE BUTT. It took me 2 hours to do the one on the passenger side and I'm still not done with the drivers side. I'm using this steal strip for fishing things through tight spots. It keeps getting hung up on the drivers side. I've got it hung up in something right now and I can't push it through or pull it back. It just hangs up on something. I fooled with it for like 2 hours and still can't get it unhooked from whatever is hanging it up. I might have to cut it off because I don't see myself getting this unhooked. Its seriously pissing me off! Sorry just had to vent some. __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks

06-23-2002, 11:10 AM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	in the sunisors? You won't be able to block the sun wihout altering the sound of the tunes. You know the highs should be within 8 inches (i think) of your mids for best sound quality, right? Last edited by Longhorn Man; 06-23-2002 at 01:36 PM.

06-23-2002, 11:54 AM	#4
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Here's how I used to have mine mounted..... Sounded pretty good __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

06-23-2002, 03:05 PM	#5
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	Fast: Yeah There are the pinch welds in the seam just above the dome light that it might be catching on. There are also double pannels up there that it might be hanging off of. My dad has a junk A/C cab that we cut the roof off of. Theres lots of little lips and stuff that could hang up this fisher line i've been using. Longhorn: I'll have enough wire that i'll be able to move the sunvisors around if I need to. But I never move my sunvisors. I think i maybe have 3 times in the 7 years i've been driving. I'm trying to create the best speaker systems without taking a saws all to my truck. I'm not too sure where i'll put the mids. May not be the closest for the best sound but I'll have something inconspicuous throw some sound from the front. Slammed those tweeters look pretty good sitting there. Thats the shoulder bolt holes right? Never thought of putting them there. __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks

06-23-2002, 03:00 AM	#2
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	probably is getting pinched into pinch welds i bet you,



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.