Dana 60 conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kwmech** · 10-08-2004, 10:26 PM

For the most part it is a bolt in swap. The most expensive thing is the single wheel hub/rotor assy, actually the hub itself. They are available thru Six States
Distibutors for a somewhat reasonable price. Everything else is interchangable.

OK how did my reply post get above his? DOOH!

1969 GMC · 10-09-2004, 12:22 AM

you could also run some rims with crazy backspacing to narrow er a little.

77gmcjoe · 10-09-2004, 06:24 AM

Would the hubs be the only parts I need to buy?
I checked Six States and they're about $400/pair.

Joe

77gmcjoe · 10-09-2004, 08:49 PM

Has anyone here ever converted a Dana 60 front axle from a dually for use in a regular fleetside 3/4 ton?
I've been told it's an expen$ive ordeal.

Thanks,

Joe

smokkey1 · 10-17-2004, 09:24 PM

do you have an 14FF. if so you could convert you rear axle with dually hubs and leave the front alone and run some hummer rims.

*1FaastC10* · 10-17-2004, 10:24 PM

im switching my dually D60 to SRW. i got lucky and found someone who had a set of SRW hubs for $150.

10-08-2004, 10:26 PM	#1
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,463	Dana 60 conversion For the most part it is a bolt in swap. The most expensive thing is the single wheel hub/rotor assy, actually the hub itself. They are available thru Six States Distibutors for a somewhat reasonable price. Everything else is interchangable. OK how did my reply post get above his? DOOH!

10-09-2004, 12:22 AM	#2
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	you could also run some rims with crazy backspacing to narrow er a little. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

10-09-2004, 06:24 AM	#3
77gmcjoe What do we get for $10? Join Date: Oct 2004 Location: Beardstown, Illinois Posts: 341	Would the hubs be the only parts I need to buy? I checked Six States and they're about $400/pair. Joe __________________ 1977 GMC K25 400/400/205 1989 Chevy Suburban R1500 350/700R4 (work beater) 1994 Chevy K3500 dually 454/4L80 1996 Corvette LT4 350/ZF 6 speed 2000 Bonneville SSEI Supercharged 3.8 Liter V6 1966 Chevelle 2 door sedan (Needs major repair )

10-09-2004, 08:49 PM	#4
77gmcjoe What do we get for $10? Join Date: Oct 2004 Location: Beardstown, Illinois Posts: 341	Dana 60 conversion Has anyone here ever converted a Dana 60 front axle from a dually for use in a regular fleetside 3/4 ton? I've been told it's an expen$ive ordeal. Thanks, Joe __________________ 1977 GMC K25 400/400/205 1989 Chevy Suburban R1500 350/700R4 (work beater) 1994 Chevy K3500 dually 454/4L80 1996 Corvette LT4 350/ZF 6 speed 2000 Bonneville SSEI Supercharged 3.8 Liter V6 1966 Chevelle 2 door sedan (Needs major repair )

10-17-2004, 09:24 PM	#5
smokkey1 Land Beast Join Date: Nov 2003 Location: Los Angeles Posts: 134	do you have an 14FF. if so you could convert you rear axle with dually hubs and leave the front alone and run some hummer rims. __________________ 90' GMC 1 Ton Suburban

10-17-2004, 10:24 PM	#6
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	im switching my dually D60 to SRW. i got lucky and found someone who had a set of SRW hubs for $150.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.