![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Account Suspended
Join Date: Dec 2003
Location: Texas
Posts: 2,686
|
Thinking About AirBags For Rear Anyone Else Got Them?
I have been thinking about making some bracketry and putting two Bags on the bag of my 85 C20 I would more than likely just run 1/4 line with Schrader Valves
No Need in having a compressor and valves Since i wont be hitting Front Back and Side To Side,,, Just helpers Anyone have them .. Yes i know they make a kit I know it can be done cheaper with a litlte bit of fabriaction. I was thinking of using Firestone Bags I Dont know alot about that stuff but i have a friend thats all about it . I just wanted to get opinions on people who have them and how much it helped on the Hauling/Sqautting |
![]() |
![]() |
![]() |
#2 |
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
A guy I know got a set installed on his Ford half ton, he just puts some pressure in when he is going to be hauling his big ol' trailer with the quad in the back, it rides really well, and doesn't squat at all when they are pressurized
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2003
Location: Abilene Texas
Posts: 287
|
talk to n2truk he is bagged or you can call krustyskustom they are in dallas 1-866-Krustys
|
![]() |
![]() |
![]() |
#4 |
Account Suspended
Join Date: Dec 2003
Location: Texas
Posts: 2,686
|
Thanks Russell.
Im mainly lookin for Opinions on Helper Bags Im not into the whole Up down crap I will still use all 9 leaf springs just make some brackets " If i even do it " I was thinking of making the brackets to hook onto the rearend inside of the springs All the kits place them outside the frame but i dont have the clearence for them on the outside. |
![]() |
![]() |
![]() |
#5 |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
I have had them on two of my daily drivers. It's real simple, they work. You can fab the brackets, but they are pretty cheap to buy. All you need is a small set of bags.
Just remember when you set them up that they can't touch "anything" or they will rub a hole in them. It's recommended to keep a small amount of air in them all the time to prevent internal chaffing.... ![]() |
![]() |
![]() |
![]() |
#6 |
Account Suspended
Join Date: Dec 2003
Location: Texas
Posts: 2,686
|
Wonder if i could put Some Gold Bond In the bellows to prevent chaffiing?
![]() ![]() |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Sep 2003
Location: Lewisville, NC
Posts: 1,836
|
What you may consider doing is adding the bags and removing a leaf or two from your rear springs, thats the only way it will help the ride, just adding the bags won't soften your ride any, but, removing leaves and since you have the bags to back up the leaves should soften your ride up some.
__________________
1985 Scottsdale Shortbed 4x4 Stout 350 with some "upgrades"-700r4-33x12.5" Mud Tires, Warn 8274-50 winch. 2005 Chevrolet Colorado Regular Cab 2wd 4-banger, 5 speed, Street Pack with 3.73 axle. |
![]() |
![]() |
![]() |
#8 |
Account Suspended
Join Date: Dec 2003
Location: Texas
Posts: 2,686
|
Nah I took the springs that were on the truck off and put some off a 4/5 CUCV Military truck The springs i had before may have been worn out but it sqautted When i pull trailers Not anymore..
|
![]() |
![]() |
![]() |
#9 |
Ultimate Diesel Dude
Join Date: Oct 2002
Location: Southwest Missouri
Posts: 328
|
I have the Firestone Ride-Rite air springs on my '81 C20. I can put nearly any load, including a 12,000 lb 5th wheel trailer, and add enough air to the bring the truck back to level. I really only need the air bags when towing trailers. My stock 3/4 ton springs are kind of soft, so I needed the extra support. When towing my 29' 8500 lb 5th-wheel, I only need about 25 psi of air in the bags to level it back out.
Adding these kind of air bags will not help the ride when empty. In fact, if you add more than 10 psi of air, it makes the ride worse because you're actually stiffening the suspension. I try to keep 10 psi in them when empty, so that the bags don't get holes internally, as stated. I've had these air bags on my truck since 1996, and I've never had a problem with them. I like my air bags because I can adjust the rear suspension up and down for varying loads, and then put it back to stock for regular driving. I also have an on-board air compressor and a guage in the cab so that I can add/remove air without getting out of the truck. Casey
__________________
Project truck: '81 C/20 converted to 6.2L TURBO DIESEL bored .040", gear drive, 6.5L injectors/pump, custom pistons, custom 4" exhaust, 700R4, 4.10's Daily Driver: '95 K1500 Tahoe, 6.5L TURBO DIESEL, NP241, 4L80E, 3.42's |
![]() |
![]() |
![]() |
Bookmarks |
|
|