Door Panel Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chev · 10-21-2004, 10:01 PM

Will door panels off of a 72 truck fit onto the 67-71's?? They look about the same size, but not sure of the fit. Thanks!

Tx Firefighter · 10-21-2004, 10:07 PM

Yes, if you'll convert your doors over to 72 type regualtors and door latch controls. The 72 has longer shafts.

Slight differences in clips/ screws on bottom edge of panel too.

67chev · 10-21-2004, 10:14 PM

Thanks TX...was watching some on Ebay, was hoping they would work. I guess I will have to keep watching for some of the good ole metal ones for the '68.

Bhull2 · 10-21-2004, 11:08 PM

Will the earlier style (flat metal) fit on the later styles? I have a 72 with the hard plastic formed door panels and was just wondering if the earlier door panels would fit.

Tx Firefighter · 10-21-2004, 11:10 PM

Yes, but you too will need to change your door controls and regualtors too the earlier pre 71 shorter shaft ones.

Longhorn Man · 10-21-2004, 11:16 PM

You could put the later ones on the 67 - 71 doors, but you'd have to drill holes in the lower portion, and if you didn't swap out the parts listed above, tehy's look silly sticking out an extra inch or so.

10-21-2004, 10:01 PM	#1
67chev Registered User Join Date: Apr 2004 Location: Spokane, WA Posts: 458	Door Panel Question Will door panels off of a 72 truck fit onto the 67-71's?? They look about the same size, but not sure of the fit. Thanks! __________________ "SicStee8" Chevy SWB Fleetside, in progress...500 HP 383 w/TriPower, 700r4, 3.73's, Lowered, Shaved Driprail/sidemarkers/handles/ant, Gonna rock!! '96 Chevy Tahoe 4X4 '84 Chevy C/K10 4X4 (FOR SALE)

10-21-2004, 10:07 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Yes, if you'll convert your doors over to 72 type regualtors and door latch controls. The 72 has longer shafts. Slight differences in clips/ screws on bottom edge of panel too. __________________ I'm on the Instagram- @Gearhead_Kevin

10-21-2004, 10:14 PM	#3
67chev Registered User Join Date: Apr 2004 Location: Spokane, WA Posts: 458	Thanks TX...was watching some on Ebay, was hoping they would work. I guess I will have to keep watching for some of the good ole metal ones for the '68. __________________ "SicStee8" Chevy SWB Fleetside, in progress...500 HP 383 w/TriPower, 700r4, 3.73's, Lowered, Shaved Driprail/sidemarkers/handles/ant, Gonna rock!! '96 Chevy Tahoe 4X4 '84 Chevy C/K10 4X4 (FOR SALE)

10-21-2004, 11:10 PM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Yes, but you too will need to change your door controls and regualtors too the earlier pre 71 shorter shaft ones. __________________ I'm on the Instagram- @Gearhead_Kevin

10-21-2004, 11:08 PM	#4
Bhull2 Registered User Join Date: Jul 2000 Location: Jasper, IN Posts: 84	Will the earlier style (flat metal) fit on the later styles? I have a 72 with the hard plastic formed door panels and was just wondering if the earlier door panels would fit.

10-21-2004, 11:16 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	You could put the later ones on the 67 - 71 doors, but you'd have to drill holes in the lower portion, and if you didn't swap out the parts listed above, tehy's look silly sticking out an extra inch or so.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.