Wanted- dually or dually parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 10-10-2004, 08:49 PM

I want to build a dually truck. I only want the short wheelbase one though, not the 157 incher.

I'm looking for either suspension and brake stuff or I'd buy a whole truck if the deal was right.

I have a trailer and can travel a reasonable distance. I'm in far North Texas, so Oklahoma, Arkansas, Louisiana, or maybe even lower Kansas is in reach.

Tell me what you have, no parts too big or small.

**GSFMECH** · 10-10-2004, 09:17 PM

Tx,
Don't know if any of this will work but I have what's left of a 75 gmc 1 ton Cab and Chassis truck. The entire disc brake front end is still under it but it has a leaf sprung 14 bolt (GM?) rear end under it. I think all the brake stuff is gone off the rear but would have to check. Problem is I'm overseas now and won't be home for 2 1/2 more weeks. It would be cheap if you come pull what you need, or take the whole truck. Not much left of it anyway and no title.
Mike

Tx Firefighter · 10-11-2004, 09:18 AM

GSFMECH, I sent you a PM. Let me know when you get everything figured out. I may be interested in driving out there.

**GSFMECH** · 10-12-2004, 01:27 AM

PM recd.

I will check on all of my stuff and see what's left when I get home and shoot you some photos. I am in Trinidad (I work on an offshore drilling rig). I should be back in the States the 27th or 28th.
Mike

True Grit · 10-19-2004, 10:48 PM

i found a 72 1 ton wrecker in a local paper . will get back to you asap with ph#. asking price was $2000. also know about a 72 1 ton with a flat bed,no eng,has 4 spd,pretty straight.cheap imo.

Tx Firefighter · 10-20-2004, 07:47 AM

Quote:

Originally Posted by True Grit

i found a 72 1 ton wrecker in a local paper . will get back to you asap with ph#. asking price was $2000. also know about a 72 1 ton with a flat bed,no eng,has 4 spd,pretty straight.cheap imo.

I'd definitely be interested in hearing about the flat bed truck.

True Grit · 10-20-2004, 08:46 AM

pm sent

**JDL** · 10-20-2004, 09:33 AM

how about a 75 or so with a flat bed and 454? I don't what year it was but he wanted around $1000.

**JIMs70GMC** · 10-20-2004, 10:58 AM

Would you consider 133" short? I'm getting a 72 c30 with that wheel base. I plan on pulling the cab and dog house. But will have the 2 piece driveshaft and what not left over as well as the front suspension and frame. I'm not sure about the rear end, it might end up under my 70. Will keep you in mind as it comes apart.

matt67350 · 10-20-2004, 11:21 AM

Did you still want the 72 I have?

True Grit · 10-20-2004, 07:42 PM

'72 1 ton wrecker,pto winch,gin poles . said it was pretty straight ,will run and drive.located in sperry,oklahoma.918-288-7080.ad in paper said $1995.

longhorn71 · 10-20-2004, 11:50 PM

I have a 67 dually for parts all the front suspenion is there open to offers

Robert1970C20rstbukt · 10-21-2004, 05:33 PM

Hey longhorn71, did you ever check about the front dually spacers and the west coast mirrors? Never got a PM back from you.

Thanks man

True Grit · 10-22-2004, 06:02 PM

tx firefighter, pm me your e mail address for pics

Tx Firefighter · 10-22-2004, 07:27 PM

True Grit, PM sent w/ email address.

LUV2XCLR8 · 10-22-2004, 08:11 PM

LOCAL SALES LOT, 70 1 TON SWB W/ FLAT BED V8 AND GRANNY 4 SPD., $1050.00

junkyardjohn · 10-22-2004, 09:03 PM

Quote:

Originally Posted by Tx Firefighter

I want to build a dually truck. I only want the short wheelbase one though, not the 157 incher..

MY 69 C-30 WRECKER IS A 133" WHEELBASE.

JOHN

10-10-2004, 08:49 PM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Wanted- dually or dually parts I want to build a dually truck. I only want the short wheelbase one though, not the 157 incher. I'm looking for either suspension and brake stuff or I'd buy a whole truck if the deal was right. I have a trailer and can travel a reasonable distance. I'm in far North Texas, so Oklahoma, Arkansas, Louisiana, or maybe even lower Kansas is in reach. Tell me what you have, no parts too big or small. __________________ I'm on the Instagram- @Gearhead_Kevin

10-10-2004, 09:17 PM	#2
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Tx, Don't know if any of this will work but I have what's left of a 75 gmc 1 ton Cab and Chassis truck. The entire disc brake front end is still under it but it has a leaf sprung 14 bolt (GM?) rear end under it. I think all the brake stuff is gone off the rear but would have to check. Problem is I'm overseas now and won't be home for 2 1/2 more weeks. It would be cheap if you come pull what you need, or take the whole truck. Not much left of it anyway and no title. Mike __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

10-11-2004, 09:18 AM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	GSFMECH, I sent you a PM. Let me know when you get everything figured out. I may be interested in driving out there. __________________ I'm on the Instagram- @Gearhead_Kevin

10-12-2004, 01:27 AM	#4
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	PM recd. I will check on all of my stuff and see what's left when I get home and shoot you some photos. I am in Trinidad (I work on an offshore drilling rig). I should be back in the States the 27th or 28th. Mike __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

10-19-2004, 10:48 PM	#5
True Grit Why Buy New? Join Date: Sep 2004 Location: Locust Grove, Oklahoma Posts: 60	i found a 72 1 ton wrecker in a local paper . will get back to you asap with ph#. asking price was $2000. also know about a 72 1 ton with a flat bed,no eng,has 4 spd,pretty straight.cheap imo. __________________ '71 GMC 1/2 Ton LWB '71 Chevy 3/4 ton Longhorn

10-20-2004, 08:46 AM	#7
True Grit Why Buy New? Join Date: Sep 2004 Location: Locust Grove, Oklahoma Posts: 60	pm sent __________________ '71 GMC 1/2 Ton LWB '71 Chevy 3/4 ton Longhorn

10-20-2004, 09:33 AM	#8
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,848	how about a 75 or so with a flat bed and 454? I don't what year it was but he wanted around $1000. __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa Last edited by JDL; 10-20-2004 at 09:35 AM.

10-20-2004, 10:58 AM	#9
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Would you consider 133" short? I'm getting a 72 c30 with that wheel base. I plan on pulling the cab and dog house. But will have the 2 piece driveshaft and what not left over as well as the front suspension and frame. I'm not sure about the rear end, it might end up under my 70. Will keep you in mind as it comes apart. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

10-20-2004, 11:21 AM	#10
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	Did you still want the 72 I have? __________________ 69 swb stepside, rebuild and upgrade in progress

10-20-2004, 07:42 PM	#11
True Grit Why Buy New? Join Date: Sep 2004 Location: Locust Grove, Oklahoma Posts: 60	'72 1 ton wrecker,pto winch,gin poles . said it was pretty straight ,will run and drive.located in sperry,oklahoma.918-288-7080.ad in paper said $1995. __________________ '71 GMC 1/2 Ton LWB '71 Chevy 3/4 ton Longhorn

10-20-2004, 11:50 PM	#12
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	I have a 67 dually for parts all the front suspenion is there open to offers

10-21-2004, 05:33 PM	#13
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Hey longhorn71, did you ever check about the front dually spacers and the west coast mirrors? Never got a PM back from you. Thanks man __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

10-22-2004, 06:02 PM	#14
True Grit Why Buy New? Join Date: Sep 2004 Location: Locust Grove, Oklahoma Posts: 60	tx firefighter, pm me your e mail address for pics __________________ '71 GMC 1/2 Ton LWB '71 Chevy 3/4 ton Longhorn

10-22-2004, 07:27 PM	#15
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	True Grit, PM sent w/ email address. __________________ I'm on the Instagram- @Gearhead_Kevin

10-22-2004, 08:11 PM	#16
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	LOCAL SALES LOT, 70 1 TON SWB W/ FLAT BED V8 AND GRANNY 4 SPD., $1050.00 __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.