Truck weights - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RON WOODGEARD · 10-05-2004, 03:27 PM

What does your truck weigh ?? Not what the Title says, but it's actual weight..

And with the weight, what is it, IE: short step, short wide, long box etc..

Longhorn Man · 10-05-2004, 05:00 PM

My 69 SWB GMC, fleet side small block Th350, coi8l rear, with alluminum wheels, intake, and headers came in at 3900 and some chainge. This was with no spare, but a small tool box and normal minimal junk. I have a pic of the ticket on another computer...but not this one.

Robert1970C20rstbukt · 10-05-2004, 05:07 PM

Mine's a C/20 long fleetside, has 15" steel wagon wheels and 31's, weighs a little over 5000lbs with a full tank, spare, and hi-lift jack.

Willy Prost · 10-05-2004, 07:50 PM

71 shortbed/stepside. 250-6 with tremec 3550 5-speed. 3780lbs. with 200lb me and half tank of gas.

70c10 · 10-05-2004, 08:44 PM

I took this pic while sitting in my truck. 70' LWB, bed mat, 3/4 tank of gas and me(225)

**Stocker** · 10-05-2004, 08:51 PM

K20, LWB, spare tire, 3 gas tanks but I can't recall how much fuel at the time - 5300#.

It was 11,300# before I unloaded the dirt...

*1972C10* · 10-05-2004, 09:10 PM

3660 No spare alum wheels and thats As A SWB Back when my truck was a LWB It wieghed 3700 even.

68LSS1 · 10-06-2004, 12:26 AM

Crap, gotta get down to 3,000. There goes the Dynamat.

68w/sbc406 · 10-06-2004, 12:58 AM

SB th350 LWB alluminum wheels no spare 3/4 tank and me(160 at the time, 190 now) 3900lbs

RON WOODGEARD · 10-08-2004, 05:13 PM

I knew they were around 4000 pounds, some of you have some great lower weight...

I weighed mine 14 or 15 years ago and it was a sort step, roll bar, front pre runner bar, 5 off road lights on top and 4 on the front bar, SmittyBuilt 3" double tube rear bumper, two High Lifts, ETC. and it was in the 4600 Lb. area.

I was curious to get an idea of what it might be now that it's lowered with all of the pre-runner stuff and off road stuff gone.

**Yukon Jack** · 10-08-2004, 05:21 PM

Before the 454, with the 307 and me in the truck it was about 5,700.

*1972C10* · 10-08-2004, 06:10 PM

3/4 Tons are heavy My 85 wieghed over 6000 with a 454 it now wieghs 5800 with a small block But i carry around a ton of chains and a jack tools stuff like that.

crazy longhorn · 10-08-2004, 06:30 PM

My longhorn tips the scales right @ 4240, with about 1/2 tank fuel, & my 220 lb @ss.....the old truck is pretty stripped tho! I run no air or heat, minus front bumper, & inner fenders, Jazz plastic buckets, alum heads & intake on the SB chev, She is rolling on 1/2 ton suspension......& no door glass. The things we do for fun

the old truck runs pretty good(for a sled)! crazyL

shortymac83 · 10-08-2004, 06:52 PM

less than my 3800 lb Delta 88...

67 LWB fleet, 250 3 spd...

gmc67swb · 10-24-2004, 10:14 AM

Finally weighed my truck yesterday 10/23. It weighed 3900. SWB, iron head 350, tremec 5 spd, spare tire, small tool set, my 260lb a$$ and some misc. junk. I was surprised. I weighed my '98 ss camaro at the Motorplex and it was 3660lb. Not that much difference in imo.

bigdog69 · 10-24-2004, 01:34 PM

68LSS1, Why do you need to get down to 3000 lbs?

bad_turbo · 10-24-2004, 01:43 PM

Hey, my '99 suburban weighs just over 8400lbs, does that count?

Project1970 · 10-24-2004, 05:53 PM

With my 230-240lb butt in the driver's seat, a half-tank of gas, trailer hitch, '99 Suburban bench, headers, Vortec heads, aluminum intake, 700R4 tranny, and new carpet, right about 4250lb.

I hope to cut that by a good amount with the LS1/4L60E...going from an iron block with iron heads and an aluminum intake to an aluminum block with aluminum heads and a composite intake should do that.

10-05-2004, 03:27 PM	#1
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	Truck weights What does your truck weigh ?? Not what the Title says, but it's actual weight.. And with the weight, what is it, IE: short step, short wide, long box etc..

10-05-2004, 05:07 PM	#3
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Mine's a C/20 long fleetside, has 15" steel wagon wheels and 31's, weighs a little over 5000lbs with a full tank, spare, and hi-lift jack. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

10-05-2004, 08:44 PM	#5
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	I took this pic while sitting in my truck. 70' LWB, bed mat, 3/4 tank of gas and me(225) Attached Images __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-05-2004, 08:51 PM	#6
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,576	K20, LWB, spare tire, 3 gas tanks but I can't recall how much fuel at the time - 5300#. It was 11,300# before I unloaded the dirt... __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

10-06-2004, 12:26 AM	#8
68LSS1 Registered User Join Date: Dec 2002 Location: Tampa Posts: 1,191	Crap, gotta get down to 3,000. There goes the Dynamat. __________________ '68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc

10-05-2004, 05:00 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	My 69 SWB GMC, fleet side small block Th350, coi8l rear, with alluminum wheels, intake, and headers came in at 3900 and some chainge. This was with no spare, but a small tool box and normal minimal junk. I have a pic of the ticket on another computer...but not this one.

10-05-2004, 07:50 PM	#4
Willy Prost Senior Member Join Date: Jan 2000 Location: Arlington, VA Posts: 398	71 shortbed/stepside. 250-6 with tremec 3550 5-speed. 3780lbs. with 200lb me and half tank of gas.

10-05-2004, 09:10 PM	#7
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	3660 No spare alum wheels and thats As A SWB Back when my truck was a LWB It wieghed 3700 even.

10-06-2004, 12:58 AM	#9
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	SB th350 LWB alluminum wheels no spare 3/4 tank and me(160 at the time, 190 now) 3900lbs __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

10-08-2004, 05:13 PM	#10
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	I knew they were around 4000 pounds, some of you have some great lower weight... I weighed mine 14 or 15 years ago and it was a sort step, roll bar, front pre runner bar, 5 off road lights on top and 4 on the front bar, SmittyBuilt 3" double tube rear bumper, two High Lifts, ETC. and it was in the 4600 Lb. area. I was curious to get an idea of what it might be now that it's lowered with all of the pre-runner stuff and off road stuff gone.

10-08-2004, 05:21 PM	#11
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Before the 454, with the 307 and me in the truck it was about 5,700. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-08-2004, 06:10 PM	#12
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	3/4 Tons are heavy My 85 wieghed over 6000 with a 454 it now wieghs 5800 with a small block But i carry around a ton of chains and a jack tools stuff like that.

10-08-2004, 06:30 PM	#13
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	My longhorn tips the scales right @ 4240, with about 1/2 tank fuel, & my 220 lb @ss.....the old truck is pretty stripped tho! I run no air or heat, minus front bumper, & inner fenders, Jazz plastic buckets, alum heads & intake on the SB chev, She is rolling on 1/2 ton suspension......& no door glass. The things we do for fun the old truck runs pretty good(for a sled)! crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

10-08-2004, 06:52 PM	#14
shortymac83 hmm... Join Date: Jan 2004 Location: Culver, Indiana Posts: 1,631	less than my 3800 lb Delta 88... 67 LWB fleet, 250 3 spd... __________________ 1983 Oldsmobile Delta 88 1967 Chevy C-10 stripper www.fcrperformance.com - wanna go...faster? talk to FCR.

10-24-2004, 10:14 AM	#15
gmc67swb Registered User Join Date: Feb 2003 Location: Mesquite, Tx Posts: 396	Finally weighed my truck yesterday 10/23. It weighed 3900. SWB, iron head 350, tremec 5 spd, spare tire, small tool set, my 260lb a$$ and some misc. junk. I was surprised. I weighed my '98 ss camaro at the Motorplex and it was 3660lb. Not that much difference in imo. __________________ GM 330HP/350, Magnuson 122HH, Tremec TKO 5spd



Register or Log In To remove these advertisements.

10-24-2004, 01:34 PM	#16
bigdog69 Registered User Join Date: Jun 2004 Location: Clearwater, FL Posts: 17	68LSS1, Why do you need to get down to 3000 lbs?

10-24-2004, 01:43 PM	#17
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Hey, my '99 suburban weighs just over 8400lbs, does that count? __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

10-24-2004, 05:53 PM	#18
Project1970 14.1 @ 96MPH Join Date: Jul 2001 Location: Mesa, AZ Posts: 2,811	With my 230-240lb butt in the driver's seat, a half-tank of gas, trailer hitch, '99 Suburban bench, headers, Vortec heads, aluminum intake, 700R4 tranny, and new carpet, right about 4250lb. I hope to cut that by a good amount with the LS1/4L60E...going from an iron block with iron heads and an aluminum intake to an aluminum block with aluminum heads and a composite intake should do that. __________________ Project1970 - LS1 Swap Complete!

Register or Log In To remove these advertisements.