63-87 rack and pinion - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**biketopia** · 06-07-2021, 01:02 PM

Rob hasn't been on since October, I would call no limit, they are super friendly and helpful over the phone!

Skinsman · 06-07-2021, 02:10 PM

Thanks for the heads up biketopia! Yes, I can see Rob is fantastic with being helpful & he is the kind of builder I'd strive to be! Amazing guy!

tallic68 · 12-12-2021, 11:47 PM

Some of the other kits I’ve seen say they may not or will not work with 5.3 truck low mount power steering pumps. Does anyone know if this kit will work with low mount ps pump on 02 5.3 truck LS?

Custom 68 · 12-27-2021, 03:33 PM

Quote:

Originally Posted by tallic68

Some of the other kits I’ve seen say they may not or will not work with 5.3 truck low mount power steering pumps. Does anyone know if this kit will work with low mount ps pump on 02 5.3 truck LS?

I was going to try to get some pictures but with the holidays it has been busy. I will say that I have this on mine and the stock 02 5.3 PS pump clears. I will also say it is dependent on how and where the engine is mounted. Since the rack portion is mounted to the front cross member this location is fixed. The variable is on the engine placement. There are quite a few options that move them up and down as well as front to rear. Some of these variations could lead to some interference with something. I will try to get some photos in the next couple days as I remember mine was close to something but I don't remember for sure.
I had built my own mounts so mine is sitting different than most others out there.
Long story but yes it will work but some checks will need to be made.
Dave

aggie91 · 01-05-2022, 01:38 PM

Quote:

Originally Posted by tallic68

Some of the other kits I’ve seen say they may not or will not work with 5.3 truck low mount power steering pumps. Does anyone know if this kit will work with low mount ps pump on 02 5.3 truck LS?

Look through the pictures of "Sunburn" in my signature. I used exactly what you are asking and my set up worked great. Look at posts 258, 259 and another on post 445. I will say this: I built custom engine mounts that moved the engine lower and BACK toward the firewall, but everything cleared and did not have an issue with interference between the engine accessories and the rack or crossmember.

tallic68 · 01-05-2022, 03:09 PM

Thanks for the replies fellas. Much appreciated.

06-07-2021, 01:02 PM	#226
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,106	Re: 63-87 rack and pinion Rob hasn't been on since October, I would call no limit, they are super friendly and helpful over the phone! __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350

06-07-2021, 02:10 PM	#227
Skinsman Registered User Join Date: Feb 2016 Location: Winnipeg MB Posts: 2	Re: 63-87 rack and pinion Thanks for the heads up biketopia! Yes, I can see Rob is fantastic with being helpful & he is the kind of builder I'd strive to be! Amazing guy!

12-12-2021, 11:47 PM	#228
tallic68 Registered User Join Date: Jan 2011 Location: Buckeye A.Z. Posts: 116	Re: 63-87 rack and pinion Some of the other kits I’ve seen say they may not or will not work with 5.3 truck low mount power steering pumps. Does anyone know if this kit will work with low mount ps pump on 02 5.3 truck LS?

01-05-2022, 03:09 PM	#231
tallic68 Registered User Join Date: Jan 2011 Location: Buckeye A.Z. Posts: 116	Re: 63-87 rack and pinion Thanks for the replies fellas. Much appreciated.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.