CA Dummy Filler Neck/Tank Delete for 67-72 Trucks with Removed In-Cab Tank

[Chevylife]

Much needed and a nice design. I would like to buy one. Thanks

[pjmoreland]

Originally Posted by Chevylife

Much needed and a nice design. I would like to buy one. Thanks

Sounds good. I sent you a private message.

[pjmoreland]

Here are some photos that were sent to me by member Yeller_71 of his truck that spent its first 50 years in California. He installed a dummy filler neck on it to preserve its really nicely aged paint. Nice truck!

[YBNORML]

Love these, would like one if you have any available. Feel free to send me a PM

Thanks

[Wilkinson_LSX]

If you can add me to the waiting list please, id like to grab one of these off you.

Thanks

[Chevylife]

Patrick, thanks for a great product. Well designed . Good shipping and service.
I got a chance to install it before Christmas. I ordered it with the 67/70 grommet and I am glad I did. My 72 grommet is about 9 months old and in good shape so I tried it first.The neck on the 71/72 must be smaller diameter.
Also not flat on the back like early version. Patrick's design counts on the flat back of the 67/70. Fit worked fine. Install is easy. The 72 grommet allows some flex but will not leak.
The 67/70 grommet with its solid flat back is the way to go. Rock solid mounting and also will not leak. I am thinking the 72 might split over time because of the diameter miss match where the 67/70 is perfect.
I could not get the smell of gas off the old cap and out of the cab so a new one plus some hardware is on the way from GMC Paul's
Great job Patrick. I am very happy with it!

[pjmoreland]

Originally Posted by Chevylife

Patrick, thanks for a great product. Well designed . Good shipping and service.
I got a chance to install it before Christmas. I ordered it with the 67/70 grommet and I am glad I did. My 72 grommet is about 9 months old and in good shape so I tried it first.The neck on the 71/72 must be smaller diameter.
Also not flat on the back like early version. Patrick's design counts on the flat back of the 67/70. Fit worked fine. Install is easy. The 72 grommet allows some flex but will not leak.
The 67/70 grommet with its solid flat back is the way to go. Rock solid mounting and also will not leak. I am thinking the 72 might split over time because of the diameter miss match where the 67/70 is perfect.
I could not get the smell of gas off the old cap and out of the cab so a new one plus some hardware is on the way from GMC Paul's
Great job Patrick. I am very happy with it!

Thank you for the photos and the information on the '72 grommet. Very helpful.

[Wilkinson_LSX]

Awesome, thank you

[pjmoreland]

Here are some photos from Travis who installed a dummy filler neck today.

[Chevylife]

May I be added to the list for neck when they are ready ? Thanks

[Chevylife]

Engineer ? Fabricator ? Therapist ? I think my truck sleeps better knowing there is a neck and cap where it belongs. I may need your help telling her she is getting a new tank under the bed.

Adding Top Gun Maverick to your list. " Don't think, just do ". I was done in less than 10 minutes and it looks great.[ATTACH]2343003[/ATTACH]

[pjmoreland]

Nice! Thanks for posting the photo. Cool truck. I think the rear fuel tank installation might take a little longer than it took to install the filler neck.

[69GMCintheHam]

Email sent

[fleetside]

I'd like to get in line for the next batch.

[pjmoreland]

Originally Posted by fleetside

I'd like to get in line for the next batch.

Sounds good. I added you to the list. I'll reach out when I have more ready to go.

[pjmoreland]

I'm working on another batch of dummy filler necks. They should be ready in about a week.

[pjmoreland]

Here's a really cool idea from Glenn who bought one of my dummy filler necks recently and converted it into a kill switch that is activated by twisting the gas cap. Here's how he did it:

"The red cap comes off. I put a 10/24 nutsert on the cap, tapped an aluminum rod, screwed in and red lock tight a piece of all thread to the cap. Cross drilled the other end and inserted a 1/8” steel rod to turn the switch."

[pjmoreland]

More photos of the hidden kill switch

[pjmoreland]

A couple more photos of the kill switch

[CarolinaHD]

Subscribing so I can get 1 of the next batch

[pjmoreland]

Originally Posted by CarolinaHD

Subscribing so I can get 1 of the next batch

Sounds good. I'm planning on building them over the weekend. I'll let you know when they are ready.

[Cooper Restorations]

I need one... What is the Paypal fee? I will send you payment.

[pjmoreland]

Originally Posted by Cooper Restorations

I need one... What is the Paypal fee? I will send you payment.

I'll send you a PM with payment instructions

[pjmoreland]

Two people are currently on the waiting list. I will make more when the list gets to five people.