Dumptruck Dolly - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**fishnixon** · 08-17-2019, 11:11 PM

A straightened tie rod, new tie rod ends, steering stabilizer attached...a good day. I am waiting for a connecting link for the steering linkage. I’ll start cleaning crossmembers soon in preparation for paint, and then opening up the truck.

**fishnixon** · 08-20-2019, 07:13 PM

Prepping more parts. Notice the V8 crossmember I’m grinding on...last pic shows Dolly waiting patiently...

**too much stuff** · 08-20-2019, 07:20 PM

Getting closer... That is a nice looking shop also.

**fishnixon** · 08-20-2019, 09:31 PM

Quote:

Originally Posted by too much stuff

Getting closer... That is a nice looking shop also.

Thanks...I always wanted a shop like this while I was in college (for years); I am thankful and glad I have it.

Yes, with every part that’s cleaned up, I inch closer to that day. After the crossmembers are cleaned, I think I’ll tackle the transmission/transfer case prep.

**fishnixon** · 09-01-2019, 12:16 AM

Dolly is now in her stall, ready for the transformation.

**fishnixon** · 09-01-2019, 12:21 AM

The proverbial “disconnect and remove the battery” photo, followed by draining of the radiator, as I am changing the motor.

**fishnixon** · 09-01-2019, 12:25 AM

I am going to remove the front clip to gain good access. First, I remove the wipers, and don’t forget to BAG all the little screws from the cowl.

**fishnixon** · 09-01-2019, 12:28 AM

Here, I document the number of spacers between the fenders and cab.

**fishnixon** · 09-01-2019, 12:36 AM

Off to the races...I am going to try leaving the hood on the clip, so I am just going after the bolts that attach the clip to the cab and front frame.

**fishnixon** · 09-01-2019, 12:40 AM

It’s easy to forget this bolt in the process...note the backing plate that goes between the fender and the cab.

**fishnixon** · 09-01-2019, 12:43 AM

I am taking this support bar off the drivers side fenderwell because I am going to leave the fenderwells on the clip, and with the steering in the way, it’s gotta go. I taped the bolts onto the bar once it was removed.

**fishnixon** · 09-01-2019, 12:50 AM

That’s what I got done for today, as I was working on a new project with some paint touch up...plus I was by myself, and I’m going to have to have help managing the clip removal.

**Ol Blue K20** · 09-01-2019, 08:21 AM

I'm amazed that everything is unbolting. It's going to look good as a 4x4.

**fishnixon** · 09-01-2019, 09:07 AM

Quote:

Originally Posted by Ol Blue K20

I'm amazed that everything is unbolting. It's going to look good as a 4x4.

Agreed...so far, so good.

**too much stuff** · 09-01-2019, 10:56 AM

You will be ready for the snow at this rate. You know there is a tool to remove the wiper arms so you don't have to pry with a screwdriver?

**fishnixon** · 09-01-2019, 11:37 AM

Quote:

Originally Posted by too much stuff

You will be ready for the snow at this rate. You know there is a tool to remove the wiper arms so you don't have to pry with a screwdriver?

I might be ready. You never know when it’ll come in this neck of the woods.

If you can, send me a picture of the tool you mentioned.

**fishnixon** · 09-01-2019, 06:21 PM

Lifting the nose off the frame...passenger side was stubborn and gave way to a 3 lb sledge...then I propped the sides up waiting for assistance.

**fishnixon** · 09-01-2019, 06:23 PM

Yes, I documented everything and bagged it.

**fishnixon** · 09-01-2019, 06:54 PM

Help arrived and we got the clip removed and placed in the yard. This was a big deal for me...NO turning back.

**Ol Blue K20** · 09-01-2019, 07:07 PM

Quote:

Originally Posted by fishnixon

Help arrived and we got the clip removed and placed in the yard. This was a big deal for me...NO turning back.

I'm surprised you only needed the 3# only once. Don't drink to much and run over the clip with the medium duty.....lol

**fishnixon** · 09-01-2019, 07:09 PM

Now, I’m going to “top half” the motor, preparing for removal...all electrical, and mechanical that can’t stay with the motor are removed, arranged and marked. These pics will assure I place the small clips, pins etc in the right spot when I put this together.

**fishnixon** · 09-01-2019, 07:12 PM

Here’s the mechanical “top half” of the motor.

**fishnixon** · 09-01-2019, 07:15 PM

Next is this Double BBQ Burger...one bun as I’m watching my Carbs.

Removing the shift handle pin on top the trans is left, and then I can “bottom half” the drivetrain...another day.

**fishnixon** · 09-01-2019, 07:18 PM

Quote:

Originally Posted by Ol Blue K20

I'm surprised you only needed the 3# only once. Don't drink to much and run over the clip with the medium duty.....lol

You’re very right...only one instance in which I had to use the enforcer...I’m quite surprised. No heat wrench yet, either.

**Ol Blue K20** · 09-01-2019, 07:21 PM

I'm getting a little excited to see it done. That burger looks great. I'm having a tri tip sammich on a ciabatta roll. Mmmmmm

08-17-2019, 11:11 PM	#251
fishnixon Senior Member Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: Dumptruck Dolly A straightened tie rod, new tie rod ends, steering stabilizer attached...a good day. I am waiting for a connecting link for the steering linkage. I’ll start cleaning crossmembers soon in preparation for paint, and then opening up the truck. Attached Images

08-20-2019, 07:13 PM	#252
fishnixon Senior Member Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: Dumptruck Dolly Prepping more parts. Notice the V8 crossmember I’m grinding on...last pic shows Dolly waiting patiently... Attached Images

08-20-2019, 07:20 PM	#253
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,775	Re: Dumptruck Dolly Getting closer... That is a nice looking shop also. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-01-2019, 12:16 AM	#255
fishnixon Senior Member Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: Dumptruck Dolly Dolly is now in her stall, ready for the transformation. Attached Images

09-01-2019, 12:21 AM	#256
fishnixon Senior Member Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: Dumptruck Dolly The proverbial “disconnect and remove the battery” photo, followed by draining of the radiator, as I am changing the motor. Attached Images

09-01-2019, 12:25 AM	#257
fishnixon Senior Member Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: Dumptruck Dolly I am going to remove the front clip to gain good access. First, I remove the wipers, and don’t forget to BAG all the little screws from the cowl. Attached Images

09-01-2019, 12:28 AM	#258
fishnixon Senior Member Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: Dumptruck Dolly Here, I document the number of spacers between the fenders and cab. Attached Images

09-01-2019, 12:36 AM	#259
fishnixon Senior Member Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: Dumptruck Dolly Off to the races...I am going to try leaving the hood on the clip, so I am just going after the bolts that attach the clip to the cab and front frame. Attached Images

09-01-2019, 12:40 AM	#260
fishnixon Senior Member Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: Dumptruck Dolly It’s easy to forget this bolt in the process...note the backing plate that goes between the fender and the cab. Attached Images

09-01-2019, 12:43 AM	#261
fishnixon Senior Member Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: Dumptruck Dolly I am taking this support bar off the drivers side fenderwell because I am going to leave the fenderwells on the clip, and with the steering in the way, it’s gotta go. I taped the bolts onto the bar once it was removed. Attached Images

09-01-2019, 12:50 AM	#262
fishnixon Senior Member Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: Dumptruck Dolly That’s what I got done for today, as I was working on a new project with some paint touch up...plus I was by myself, and I’m going to have to have help managing the clip removal. Attached Images

09-01-2019, 08:21 AM	#263
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: Dumptruck Dolly I'm amazed that everything is unbolting. It's going to look good as a 4x4. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

09-01-2019, 10:56 AM	#265
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,775	Re: Dumptruck Dolly You will be ready for the snow at this rate. You know there is a tool to remove the wiper arms so you don't have to pry with a screwdriver? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-01-2019, 06:21 PM	#267
fishnixon Senior Member Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: Dumptruck Dolly Lifting the nose off the frame...passenger side was stubborn and gave way to a 3 lb sledge...then I propped the sides up waiting for assistance. Attached Images

09-01-2019, 06:23 PM	#268
fishnixon Senior Member Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: Dumptruck Dolly Yes, I documented everything and bagged it. Attached Images



Register or Log In To remove these advertisements.

09-01-2019, 06:54 PM	#269
fishnixon Senior Member Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: Dumptruck Dolly Help arrived and we got the clip removed and placed in the yard. This was a big deal for me...NO turning back. Attached Images

09-01-2019, 07:09 PM	#271
fishnixon Senior Member Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: Dumptruck Dolly Now, I’m going to “top half” the motor, preparing for removal...all electrical, and mechanical that can’t stay with the motor are removed, arranged and marked. These pics will assure I place the small clips, pins etc in the right spot when I put this together. Attached Images

09-01-2019, 07:12 PM	#272
fishnixon Senior Member Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: Dumptruck Dolly Here’s the mechanical “top half” of the motor. Attached Images

09-01-2019, 07:15 PM	#273
fishnixon Senior Member Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: Dumptruck Dolly Next is this Double BBQ Burger...one bun as I’m watching my Carbs. Removing the shift handle pin on top the trans is left, and then I can “bottom half” the drivetrain...another day. Attached Images

09-01-2019, 07:21 PM	#275
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: Dumptruck Dolly I'm getting a little excited to see it done. That burger looks great. I'm having a tri tip sammich on a ciabatta roll. Mmmmmm __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

Register or Log In To remove these advertisements.