![]() |
|
![]() |
#1 | |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Quote:
Here's how I like 'em. BMW M3, 4.0 V8 with IR intake, and revs to something like 8500-9000 rpm! Fairly quiet exhaust so you mostly hear the intake noise. Around 2:30 there's vid of it driving on the street. That thing sounds amazing! This is what I'm after with the destroked 5.3 build.
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
|
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: May 2007
Location: Deale Md
Posts: 4,663
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
cool video , the LS will be assume with a IR intake on it.
__________________
James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change! |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2011
Location: Pocahontas, AR
Posts: 554
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Subscribed! Don't know how I missed this build before. Glad you posted it on pt.
Chris Posted via Mobile Device
__________________
1966 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=615165 1968 GTO http://67-72chevytrucks.com/vboard/s...=1#post7650182 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Update on the engine plans, and a change to the planned 140 mph speedo. I'm not going to use a L33 5.3 block- they can't be bored much at all. Leaving the stock bore would make it around 290 CI, so it probably wouldn't make enough torque to pull the truck around. I've decided to go with a 4" bore LS2 block (still with a 4.8 crank) to make 329 CI. I'll probably go with LS3 heads since they flow plenty and have hollow intake valves that will work well with the 8500 RPM limit.
I worked on the Speedo graphics today to send Jason at Greenback Decal (the guy that's building the tach and speedo graphics). I changed it to 15 mph increments from the original 10 mph increments so I could keep the same spacing and amount of characters. So it goes to 150 mph instead of the 140 mph I was planning on, and keeps the original hash marks on the speedo face. The problem I had with 140 mph was trying to squeeze the extra 110, 120, 130, and 140 characters onto the lens while keeping the original 10 mph increments- it would be too crowded that way. It kinda looks too busy with the 15 mph increments, but I haven't come up with any other way to do it. Thoughts and suggestions? Leave it at 150mph with 15mph increments? Or? Anybody want to donate a LS2 block? ![]() ![]() An original 100 mph speedo with 10mph increments. I really like the way every number ends in a zero. ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#5 |
Registered User
![]() Join Date: Sep 2009
Location: menifee california
Posts: 788
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
you could do like alot of modern speedos and just do every other 10 miles an hour-20-40-60. would be less crouded
|
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: May 2007
Location: Deale Md
Posts: 4,663
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Do you have a pic of the 140 for us to compare.
__________________
James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change! |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
I don't really like the 5's on the 150 scale. OMG, how fast do you plan to drive that thing?????
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#8 | ||
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Quote:
I didn't make a 140 mph edit, I thought it would get too crowded if I tried to cram in the extra 110, 120, 130, and 140. Quote:
I did some searching this morning for a factory KPH speedo and hit the jackpot. They go to 160 KPH in increments of 20 without being crowded, and all the numbers end in a zero. Unfortunately these were the only two pics I could find in the '64-66 style. Sure would be nice to find a NOS deluxe KPH lens!
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
||
![]() |
![]() |
![]() |
#9 |
Registered User
![]() Join Date: May 2007
Location: Deale Md
Posts: 4,663
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Your pretty good at finding needles in a hay stack so a nos lens should be a piece of cake oh yeah this speedo gets my vote.
__________________
James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change! |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
no matter what eng you put in there
the definition of acceleration The Definition of Acceleration Read this through slowly and try to comprehend the amount of force produced in just over 4 seconds! There are no rockets or airplanes built by any government in the world that can accelerate from a standing start as fast as a Top Fuel Dragster or Funny Car! [] DEFINITION OF ACCELERATION: One top fuel dragster 500 cubic inch (approx 8.3 litres) engine makes more horsepower than the first 4 rows of stock cars at the Daytona 500. It takes just 15/100ths of a second for all 8,000+ horsepower of an NHRA Top Fuel dragster engine to reach the rear wheels. Under full throttle, a dragster engine consumes 1-1/2 gallons of nitro methane per second; a fully loaded 747 consumes jet fuel at the same rate with 25% less energy being produced. A stock Dodge Hemi V8 engine cannot produce enough power to drive the dragster's supercharger. With 3,000 CFM of air being rammed in by the supercharger on overdrive, the fuel mixture is compressed into a near-solid form before ignition. Cylinders run on the verge of hydraulic lock at full throttle. At the stoichiometric (stoichiometry: methodology and technology by which quantities of reactants and products in chemical reactions are determined) 1.7:1 air/fuel mixture of nitro methane, the flame front temperature measures 7,050 deg F. Nitro methane burns yellow... The spectacular white flame seen above the stacks at night is raw burning hydrogen, dissociated from atmospheric water vapor by the searing exhaust gases. Dual magnetos supply 44 amps to each spark plug. This is the output of an arc welder in each cylinder. Spark plug electrodes are totally consumed during a pass. After halfway, the engine is dieseling from compression, plus the glow of exhaust valves at 1,400 deg F. The engine can only be shut down by cutting the fuel flow. If spark momentarily fails early in the run, unburned nitro builds up in the affected cylinders and then explodes with sufficient force to blow cylinder heads off the block in pieces or split the block in half. In order to exceed 300 mph in 4.5 seconds, dragsters must accelerate an average of over 4G's. In order to reach 200 mph (well before half-track), the launch acceleration approaches 8G's. Dragsters reach over 300 miles per hour before you have completed reading this sentence. Top fuel engines turn approximately 540 revolutions from light to light ! Including the burnout, the engine must only survive 900 revolutions under load. The redline is actually quite high at 9,500 rpm. Assuming all the equipment is paid off, the crew worked for free, and for once NOTHING BLOWS UP, each run costs an estimate $1:000:00 per second. The current top fuel dragster elapsed time record is 4.428 seconds for the quarter mile (11/12/06, Tony Schumacher, at Pomona , CA ). The top speed record is 336.15 mph as measured over the last 66' of the run (05/25/05 Tony Schumacher, at Hebron , OH ). Putting all of this into perspective: You are driving the average $140,000 Lingenfelter 'twin-turbo' powered Corvette Z06.. Over a mile up the road, a top fuel dragster is staged and ready to launch down a quarter mile strip as you pass. You have the advantage of a flying start. You run the 'Vette hard up through the gears and blast across the starting line and pass the dragster at an honest 200 mph. The 'tree' goes green for both of you at that moment. The dragster launches and starts after you. You keep your foot down hard, but you hear an incredibly brutal whine that sears your eardrums and within 3 seconds, the dragster catches and passes you. He beats you to the finish line, a quarter mile away from where you just passed him. Think about it, from a standing start, the dragster had spotted you 200 mph and not only caught, but nearly blasted you off the road when he passed you within a mere 1,320 foot long race course. ....... and that my friend, is ACCELERATION!! ron |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Dec 2011
Location: Blytheville/Bentonville, AR
Posts: 393
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Hubba hubba hubba!!
Posted via Mobile Device |
![]() |
![]() |
![]() |
#12 | |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Quote:
![]() ![]() Well, I'm pretty sure I've settled in on the 160 mph speedo. Much more simple and not as crowded/busy. ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
would you feel secure in one of these at 160.I have had my old 4 x 4 panel up around 85 and felt that was enough and that was with a 4 cyl and it was just starting to hum' I did have a 911T when I was younger and had it reading at 150 mph and felt it was pretty quick
these vehicles of ours are like a square brick in the wind though. I can remember coming into Vancouver on the freeway in my panel fighting a good h/wind and had trouble going over 50mph ron |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Great project! You 60-66 guys arent afraid to charge in there!
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
![]() |
![]() |
![]() |
#15 | |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Quote:
Thanks! As far as updates go, the VW engine is back in- just gotta hook everything back up, so that'll be out of the way within the next week or so. I got the steering column cover back from a friend last week, so I have all the pieces to go ahead and rebuild/detail the column and paint the wheel, turn signal housing, and shifter bell. I'll probably do this next. I haven't checked with the gauge guy in a few weeks, so no update on the speedo/tach for now. I haven't been able to find an LS2 block locally, so I'm not able to mock up the engine/trans yet either. I feel like a slacker for not making any progress this summer! I have been working on replicating the textured '66 only dashboard paint. This was using SEM Texture Coating in a rattle can, and swapping the spray nozzle for a regular paint can tip for a finer mist. I backed off the panel about 2 feet so that it would dry spray and not flow out. It's a little to coarse/rough but fairly close, and I think buying it by the quart and spraying it at higher pressure through my Sata will produce the results I'm looking for. The green is just some rattle can paint over the SEM to see how well paint covers without distorting the texture. I'd say the factory texture matches 150-180 grit sandpaper pretty closely, and the rattle can SEM is around the texture of 80-120 grit. I'm hoping that thinning it and spraying through my paint gun should get it dead on the original paint texture! ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Jun 2010
Location: Vancouver Island BC
Posts: 652
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Another cool tip, I also didn't know the '66 had a textured dash.
__________________
![]() |
![]() |
![]() |
![]() |
#17 | |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Quote:
![]() ![]() I was at a local scrap dealer yesterday and picked up a floor shift lever from an early 50's Chevy 3100. I'll weld on a tab to mount it to the T56 and get an original shift knob engraved with the 6 speed pattern. It's solid forged instead of a hollow tube, so it should hold up to any abuse it "might" encounter. ![]() ![]() ![]() If I can find one, I'll sand the 4/5 speed shift pattern off an original shift knob and have the six speed pattern engraved, filled with white paint, then clear coat it. I don't know anyone that does precision engraving though. ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
|
![]() |
![]() |
![]() |
#18 | |
Registered User
Join Date: Apr 2011
Location: Detroit
Posts: 432
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Quote:
http://www.epcoshiftknobs.com/engraved.html but $ |
|
![]() |
![]() |
![]() |
#19 |
Truck and auto performance nut
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Got that backwards I think.....LSx motors do NOT leak....like a sbc.
Posted via Mobile Device
__________________
Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Jul 2011
Location: Des Moines, Iowa
Posts: 3,016
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
I never mentioned sbc or compared the two. Like I said, it's what I've heard.
__________________
project: "my happy mess" |
![]() |
![]() |
![]() |
#21 |
Artist
![]() Join Date: Jan 2010
Location: Rockwell NC
Posts: 422
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
With your eye and level of detail I think you could engrave the shifter knob with a dremel.
Posted via Mobile Device
__________________
66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66 |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Jul 2006
Location: Willis, Texas
Posts: 754
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
If I can find one, I'll sand the 4/5 speed shift pattern off an original shift knob and have the six speed pattern engraved, filled with white paint, then clear coat it. I don't know anyone that does precision engraving though.
I don't know for sure but you might check with a bowling ball retailer, they engrave names on balls. Posted via Mobile Device
__________________
65Gregg Blue long bed White TBSS 61 Impala “The two most important days in your life are the day you are born and the day you find out why.” Mark Twain |
![]() |
![]() |
![]() |
#23 |
Senior Member
![]() Join Date: Oct 2009
Location: Fayetteville, Arkansas
Posts: 1,923
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
i like the texture on your dash... i did mine by backing off about a foot with real low air pressure. kept misting color on color till the buildup covered good. i still had to matte clearcoat after the paint dried because to me it felt a bit rough. how did you do yours?
|
![]() |
![]() |
![]() |
#24 | |||||
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Quote:
Quote:
Quote:
Quote:
Quote:
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
|||||
![]() |
![]() |
![]() |
#25 |
Artist
![]() Join Date: Jan 2010
Location: Rockwell NC
Posts: 422
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Shoot!! There ya go! $33... heck thats worth it!
__________________
66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66 |
![]() |
![]() |
![]() |
Bookmarks |
|
|