1966 gmc 3/4 cab help

[old_1966_GMC]

also i myi have the 305E engine the water pump is pretty big wat water pump and partdo i need to replace this wit?

[Bugeyev8]

Hey, welcome to the sire..I am down the road from you in San Leandro, I would fix that cab, I did the same repairs on my 62 last year, not really all that hard just takes time and paitience and be sure to get everything test fitted before welding

[old_1966_GMC]

thanks also on ur truck did u end up fixing that peice where he whole is at but the one on the right

[old_1966_GMC]

what are that exact peice that i would need to do this fix and also are lmc parts any good who also makes these parts the my truck

[aerotruk63]

Link to Vendors on this site.
http://67-72chevytrucks.com/links/browselinks.php?c=2

[old_1966_GMC]

i'll post some pic's once i can get the truck to my house for the first time so you guys can see what im ganna work with and the condition on the truck.

i'll also take some advice as wat i should add on to it.

[old_1966_GMC]

i'll post some pic's once i can get the truck to my house for the first time so you guys can see what im ganna work with and the conditions on the truck.

i'll also take some advice as wat i should add on to it

[tapeworm]

That looks very fixable-I'd stick with what you have

I'd suggest you have the doors on while you mount the rockers-this will be a good way to make sure everything lines up when you are done.

[old_1966_GMC]

wat about the doors and fender ther preatty beat up and rusted will it make a diffrence if i just buy some new reprodution doors and fenders will i have any problem has any one ever bougth new repodution parts how did they go

[Bugeyev8]

the repop fenders are junk, I had a set and just decided to fix the old ones I had, you would be better off finding a good used set and repairing the rust in the lower sections, doors are about 600$ each new and I suspect they are not great either, I would just repair those too..the panels are availible and are pretty cheap, these trucks still come into the pick n pulls here all the time, I got a good hood from the Richmond yard last year, I will let you know if I see another truck in the yards if you want, there is also craigslist...I see parts there all the time

[old_1966_GMC]

ive only seen truck in the picknpulls but it was already missing every part it had on it

[old_1966_GMC]

reaseon i asked about the doors is cause there seem to be a recently fix bottom coners that dont look to good of a job on it

[old_1966_GMC]

well i got a chance to take a few but no the best pics i was looking for. the yard was a mess i'll be take some btter ones once i can get it out for the fisrt time in a few years

[old_1966_GMC]

pic's

[old_1966_GMC]

more...

[old_1966_GMC]

more...

[old_1966_GMC]

any advise will be help full

[SRVBLUES64]

take her a part and check for rust, patch it, and drive it

[old_1966_GMC]

the only major rucst is in the floor the doors and fendder arent to bad to still need a lil bit of a rust repair

[Bugeyev8]

Hey, there are 2 305 v6 trucks at the pick n pull on Mowry in Newark, hurry and check them out, they are getting close to pulling them