NV WTB antenna bezel nut, glove box door and emblems for 1971 C-10

[71CHEVYSHORTBED402]

LOL.......I know it. Life is a coincidence at times. Sorry for any inconvenience. Anyway, as I look at my bezel nut, I'm going to throw you another curve (unintentionally, of course). My antenna is a fixed mast and guess what? The bezel nut is like what you show for telescoping (see image).............Can't guarantee it's original, but if I had to bet it is.......Thoughts? Are the bezels and grommets the same for both types? Edit: About that "extra NOS stationary mast nuts", if that's what's attached to that antenna you're showing, seems mine is different. I may have to pull it off the shelf, take an image.

[72 Super]

Mel, once 71CHEVYSHORTBED402 decides on which style he needs and if you are offering the antenna parts to anyone else, I will take a bezel,nut, gasket and mast. All items would be for a fixed mast assembly.

Thank you,
Ray

[1rippen6]

I will get inline for a fixed mast antenna set if any are left

[71CHEVYSHORTBED402]

Hi Mel: I'm in for the "telescoping" set-up, otherwise known as the high crown nut. As for why my fixed mast has this type, I'm going to declare it a mystery pending research and/or I take apart my antenna. On a side note, the method for which my fixed mast attaches to the mount is not like your fourth image. I don't have it handy, but if I recall, my mast has a short threaded (male) end that's just part of the mast (i.e., one piece). I suspect my antenna is an example for factory "use what you've got". Please PM your Paypal and $, and I'll pay promptly. Thank you for your patience.

Thank you.

[71CHEVYSHORTBED402]

BTW, here's the bottom of my stationary mast. Screws into the female end surrounded by plastic. Nothing else to it. Is it original? Heck I don't know. So far everything else has been, less common replacements. I'm the 2nd owner, bought it in 1989:

[Classic Bowties]

Originally Posted by 71CHEVYSHORTBED402

Hi Mel: I'm in for the "telescoping" set-up, otherwise known as the high crown nut. As for why my fixed mast has this type, I'm going to declare it a mystery pending research and/or I take apart my antenna. On a side note, the method for which my fixed mast attaches to the mount is not like your fourth image. I don't have it handy, but if I recall, my mast has a short threaded (male) end that's just part of the mast (i.e., one piece). I suspect my antenna is an example for factory "use what you've got". Please PM your Paypal and $, and I'll pay promptly. Thank you for your patience. Thank you.

If you go back to above post #23, nowhere did we offer a setup for a telescopic mast antenna, in the first line of post #1 you had asked for fixed mast, which we then offered. That one pictured high crown telescopic setup is from our own 69 GMC NOS parts stash and was only shown to note the differences between the two types since you had said you didn't know. I do not think we are going to be able to get a deal done here and since the parts have been pulled out and pics were taken, we are going to relist the above pictured parts in a parts board F/S thread. Mel

Originally Posted by 72 Super

Mel, once 71CHEVYSHORTBED402 decides on which style he needs and if you are offering the antenna parts to anyone else, I will take a bezel,nut, gasket and mast. All items would be for a fixed mast assembly. Thank you, Ray

Originally Posted by 1rippen6

I will get inline for a fixed mast antenna set if any are left

As stated above, we are going to relist on the parts board and each of your stated interests will be noted in that F/S thread. Please check out the thread and confirm there or pass. Thanks...

[71CHEVYSHORTBED402]

I believe that's strike three. Thanks Mel.