Roll Cage - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jgh64pkup · 06-11-2009, 07:22 PM

can you get a pic of you brakes i would like to see that
so they have 1 bleeder for each piston

Garagedude · 06-11-2009, 10:10 PM

next time I have the tires off I will take a pic

jgh64pkup · 06-14-2009, 05:19 PM

i found a pic in a magazine
what rear do you have under it

Garagedude · 06-15-2009, 08:58 AM

Its a 12 bolt camaro rearend, it has an eaton posi in it, richmond gears, wilwood disk brakes, aluminum yoke, moser axles, and a bearing cap support pan.

jgh64pkup · 06-15-2009, 11:56 AM

im thinking about a nine inch swap
so do you have any interior pics

AKoldstyle · 06-24-2009, 04:47 AM

Hey I really like what you have going here.I chose a blazer so I could hide my 10 point cage more.Although now I have alittle 104 wheelbase. Ive got a 598 in mine but I have yet 2 hear her roar. Check out my build if you get a chance. You might see something in there you can use. Nice look so far and good 2 see well built trucks to haulass in.

djracer · 06-24-2009, 07:09 AM

Man that is looking pretty sweet. You should put a link to your build thread in your signature. What are you using for rear suspension?

Kevin

Quote:

Originally Posted by AKoldstyle

Hey I really like what you have going here.I chose a blazer so I could hide my 10 point cage more.Although now I have alittle 104 wheelbase. Ive got a 598 in mine but I have yet 2 hear her roar. Check out my build if you get a chance. You might see something in there you can use. Nice look so far and good 2 see well built trucks to haulass in.

AKoldstyle · 06-24-2009, 02:08 PM

I cant figure out how to attache my thread to my signature. My thread is in the blazer section under Prostreet/dragrace blazer and there are plenty of pics of the build. I am running morrison ladder bars with solid ends and a coil over strange shocks.The housing is 9inch with strange pro iron section.

rene495 · 08-25-2009, 02:03 AM

Quote:

Originally Posted by Garagedude

Finally making some progress again, got the back tires on it now, Put a 29x18.5 Mickey Thompson sportsman tire on. Working on installing the roll cage, ordered the main hoop from SW Race cars, the hope fits awesome in the cab, the rest of the cage we are cutting and notching all the tubing, and it is coming out really well, I have been taking my time doing all the notches and welding everything up. All I have left to do to finish the cage is install the Xbar in between the two back bars, and do the door bars. I have lexan to go in for the new back window and I am thinking I might do the side windows too. As soon as I finish welding everything up I have a buddy that's going to paint the cage a candy apple red, and he is going to paint the back part of the frame.

Truck look amazing. I'm working on a 72 myself and I plan to make it similar to yours. Is yours a long bed?

72 SUPER10 · 08-25-2009, 06:57 PM

Looking good g dude

Fisher-Racing · 09-26-2009, 12:06 AM

Nice job,

a1953mdl · 10-10-2009, 01:31 PM

It's time for some more pics and an update.

joes50pu · 01-21-2010, 02:16 AM

Truck looks really good. I bought me a 1968 1/2 ton from a friend of mine that was back halfed, has a 9-inch rearend, 4-link, and a roll cage like that coming through the back window with the cage inside. I sure would like to see your cage inside the truck. I have a long ways to go. I just finished the body work on the two front fenders, grille, cowl and both doors. Looks like I'm going to recess the center of the firewall since someone before my friend cut it out for more engine kick back. This style of truck isn't my thing but it's something to work on when I have nothing to work on at the shop.

Garagedude · 01-21-2010, 06:50 PM

Its been a long time since I have been on guys, I have been working long weeks and doing college full time, Since I have last posted I blew my TH400 up, I then took my motor and trans out I built I full blown trans brake transmission, I cut the firewall and moved it back almost 8inches, I put comp cam roller rockers on, a proform carb, new pulley setup, headman headers, msd box, I did the dash in aluminum and put most of the gauges back in Pictures will be soon, I am taking it to get alignment this weekend then maybe the track next week.

djracer · 01-21-2010, 08:14 PM

We need pics of these trucks.

joes50pu · 01-21-2010, 11:34 PM

I will take my camera to work with me tomorrow and take a shot of the back halfed frame. I will probably but a Cowl Induction Hood for the truck this spring. I may have scored a free long bed fleetside to cut down but I won't know for sure until next week.

78-5.3 · 05-22-2010, 09:08 AM

i know this is an old tread but can anyone tell me the backspace of the rims on GARAGEDUDE 's truck 12x15 !what is the back spacing ?i need to order some rims this weekend im thinking 5.5 back space
thx

Nick's81 · 05-22-2010, 01:58 PM

How about some picks of the cage behind the seat tring to figure out how and where to put the tubes not a lot of room

Garagedude · 05-27-2010, 11:48 PM

My rims are 15x12 with 7.5 offset but my rear isn't stock its an after market rear from moser that was made for an iroc camaro

noonzor · 05-28-2010, 11:54 PM

schweeet, pictures please!! haha

Garagedude · 05-31-2010, 03:46 PM

When I get some time I will post pics of everything I have done, right now I am in the middle of losing the girl I love and thats more important to me.

noonzor · 05-31-2010, 04:15 PM

****.. sorry to hear dude. best of luck!

team39763 · 06-01-2010, 12:29 AM

Quote:

Originally Posted by Garagedude

When I get some time I will post pics of everything I have done, right now I am in the middle of losing the girl I love and thats more important to me.

Good luck dude, hope everything works out for the best.

BOHICA · 06-12-2011, 09:07 PM

An update:

I've recently begun working on this truck to get it back on the road. It's been sitting since Ron 586 traded his Nova for it.

Where to start... Garagedude did a decent job welding, when he actually bothered trying. The roll cage is NOT fully welded. He left significant gaps where the back bars tie into the main hoop. He was also lazy and didn't even try to weld all the way around the cross-bracing on the back bars. There are also spots where he didn't burn through, but he deeply dug into the tubing. The hoop and front supports are not tied into the frame. They're just welded to the floor, but at least he used plates. When he ran the battery cable from the back to the front, he secured it to the frame the whole way until he got to the cab. For some unknown reason, despite having ample holes in the frame, Garagedude elected to drill bolts into the cab floor, from the underside, to secure the battery cable. He then left two or three sharp, inch-long bolts sticking up on the passenger side of the tranny hump. I meant to take pics, but the friend helping my disassemble the truck yesterday pulled them out before I could take any. The racing seats he put in just had regular nuts holding them on over washers. No lock washers or nylon nuts. Instead of correctly affixing the passenger racing harness to the roll cage like he did the driver's, he ran the shoulder straps down to the floor and bolted them to the seat. There's lots more, but I think that's enough examples.

I wasn't going to post anything, but I thought about it, and since he was just plain too lazy to weld the back braces, I don't really have any sympathy. I'll get some pics posted later. I've never been to Orangeburg Dragstrip in South Carolina, but I don't know how in the world he got it to pass their tech inspection.

kpeztruck · 06-13-2011, 10:29 PM

Quote:

Originally Posted by AKoldstyle

Hey I really like what you have going here.I chose a blazer so I could hide my 10 point cage more.Although now I have alittle 104 wheelbase. Ive got a 598 in mine but I have yet 2 hear her roar. Check out my build if you get a chance. You might see something in there you can use. Nice look so far and good 2 see well built trucks to haulass in.

I really like the shifter mount. I might have to steal that idea for mine. I am always looking for a new way to skin the same ole' cat. LOL Thanks, Paul

06-11-2009, 07:22 PM	#26
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Roll Cage can you get a pic of you brakes i would like to see that so they have 1 bleeder for each piston __________________ Gage 1967 C10 Shortbed Stepside

06-11-2009, 10:10 PM	#27
Garagedude Registered User Join Date: Aug 2008 Location: Summerville SC Posts: 217	Re: Roll Cage next time I have the tires off I will take a pic

06-14-2009, 05:19 PM	#28
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Roll Cage i found a pic in a magazine what rear do you have under it __________________ Gage 1967 C10 Shortbed Stepside

06-15-2009, 08:58 AM	#29
Garagedude Registered User Join Date: Aug 2008 Location: Summerville SC Posts: 217	Re: Roll Cage Its a 12 bolt camaro rearend, it has an eaton posi in it, richmond gears, wilwood disk brakes, aluminum yoke, moser axles, and a bearing cap support pan.

06-15-2009, 11:56 AM	#30
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Roll Cage im thinking about a nine inch swap so do you have any interior pics __________________ Gage 1967 C10 Shortbed Stepside

06-24-2009, 04:47 AM	#31
AKoldstyle Registered User Join Date: Jun 2008 Location: anchorage, ALASKA Posts: 111	Re: Roll Cage Hey I really like what you have going here.I chose a blazer so I could hide my 10 point cage more.Although now I have alittle 104 wheelbase. Ive got a 598 in mine but I have yet 2 hear her roar. Check out my build if you get a chance. You might see something in there you can use. Nice look so far and good 2 see well built trucks to haulass in. Attached Images

06-24-2009, 02:08 PM	#33
AKoldstyle Registered User Join Date: Jun 2008 Location: anchorage, ALASKA Posts: 111	Re: Roll Cage I cant figure out how to attache my thread to my signature. My thread is in the blazer section under Prostreet/dragrace blazer and there are plenty of pics of the build. I am running morrison ladder bars with solid ends and a coil over strange shocks.The housing is 9inch with strange pro iron section. Attached Images

08-25-2009, 06:57 PM	#35
72 SUPER10 Registered User Join Date: Nov 2008 Location: LUCEDALE MS. Posts: 157	Re: Roll Cage Looking good g dude

09-26-2009, 12:06 AM	#36
Fisher-Racing Registered User Join Date: Sep 2009 Location: Louisiana Posts: 7	Re: Roll Cage Nice job,

10-10-2009, 01:31 PM	#37
a1953mdl Rusty but Trusty Join Date: Jan 2007 Location: Texas Posts: 228	Re: Roll Cage It's time for some more pics and an update. __________________ 72 SWB, 454 / th400... hoping the kids don't get all the parts before it gets built

01-21-2010, 02:16 AM	#38
joes50pu Registered User Join Date: Jan 2010 Location: yuba city ca Posts: 31	Re: Roll Cage Truck looks really good. I bought me a 1968 1/2 ton from a friend of mine that was back halfed, has a 9-inch rearend, 4-link, and a roll cage like that coming through the back window with the cage inside. I sure would like to see your cage inside the truck. I have a long ways to go. I just finished the body work on the two front fenders, grille, cowl and both doors. Looks like I'm going to recess the center of the firewall since someone before my friend cut it out for more engine kick back. This style of truck isn't my thing but it's something to work on when I have nothing to work on at the shop.

01-21-2010, 06:50 PM	#39
Garagedude Registered User Join Date: Aug 2008 Location: Summerville SC Posts: 217	Re: Roll Cage Its been a long time since I have been on guys, I have been working long weeks and doing college full time, Since I have last posted I blew my TH400 up, I then took my motor and trans out I built I full blown trans brake transmission, I cut the firewall and moved it back almost 8inches, I put comp cam roller rockers on, a proform carb, new pulley setup, headman headers, msd box, I did the dash in aluminum and put most of the gauges back in Pictures will be soon, I am taking it to get alignment this weekend then maybe the track next week.

01-21-2010, 08:14 PM	#40
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Roll Cage We need pics of these trucks. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-21-2010, 11:34 PM	#41
joes50pu Registered User Join Date: Jan 2010 Location: yuba city ca Posts: 31	Re: Roll Cage I will take my camera to work with me tomorrow and take a shot of the back halfed frame. I will probably but a Cowl Induction Hood for the truck this spring. I may have scored a free long bed fleetside to cut down but I won't know for sure until next week.

05-22-2010, 09:08 AM	#42
78-5.3 Registered User Join Date: Oct 2009 Location: Waterboro ,MAINE Posts: 547	Re: Roll Cage i know this is an old tread but can anyone tell me the backspace of the rims on GARAGEDUDE 's truck 12x15 !what is the back spacing ?i need to order some rims this weekend im thinking 5.5 back space thx __________________ 78 C-10 5.3 LSX -4L60E



Register or Log In To remove these advertisements.

05-22-2010, 01:58 PM	#43
Nick's81 Registered User Join Date: Jan 2010 Location: Medford Or. Posts: 78	Re: Roll Cage How about some picks of the cage behind the seat tring to figure out how and where to put the tubes not a lot of room

05-27-2010, 11:48 PM	#44
Garagedude Registered User Join Date: Aug 2008 Location: Summerville SC Posts: 217	Re: Roll Cage My rims are 15x12 with 7.5 offset but my rear isn't stock its an after market rear from moser that was made for an iroc camaro

05-28-2010, 11:54 PM	#45
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: Roll Cage schweeet, pictures please!! haha __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

05-31-2010, 03:46 PM	#46
Garagedude Registered User Join Date: Aug 2008 Location: Summerville SC Posts: 217	Re: Roll Cage When I get some time I will post pics of everything I have done, right now I am in the middle of losing the girl I love and thats more important to me.

05-31-2010, 04:15 PM	#47
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: Roll Cage ****.. sorry to hear dude. best of luck! __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

06-12-2011, 09:07 PM	#49
BOHICA Registered User Join Date: Apr 2006 Location: Cookeville, TN Posts: 274	Re: Roll Cage An update: I've recently begun working on this truck to get it back on the road. It's been sitting since Ron 586 traded his Nova for it. Where to start... Garagedude did a decent job welding, when he actually bothered trying. The roll cage is NOT fully welded. He left significant gaps where the back bars tie into the main hoop. He was also lazy and didn't even try to weld all the way around the cross-bracing on the back bars. There are also spots where he didn't burn through, but he deeply dug into the tubing. The hoop and front supports are not tied into the frame. They're just welded to the floor, but at least he used plates. When he ran the battery cable from the back to the front, he secured it to the frame the whole way until he got to the cab. For some unknown reason, despite having ample holes in the frame, Garagedude elected to drill bolts into the cab floor, from the underside, to secure the battery cable. He then left two or three sharp, inch-long bolts sticking up on the passenger side of the tranny hump. I meant to take pics, but the friend helping my disassemble the truck yesterday pulled them out before I could take any. The racing seats he put in just had regular nuts holding them on over washers. No lock washers or nylon nuts. Instead of correctly affixing the passenger racing harness to the roll cage like he did the driver's, he ran the shoulder straps down to the floor and bolted them to the seat. There's lots more, but I think that's enough examples. I wasn't going to post anything, but I thought about it, and since he was just plain too lazy to weld the back braces, I don't really have any sympathy. I'll get some pics posted later. I've never been to Orangeburg Dragstrip in South Carolina, but I don't know how in the world he got it to pass their tech inspection. Last edited by BOHICA; 06-12-2011 at 09:08 PM.

Register or Log In To remove these advertisements.