|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-27-2023, 03:49 PM
|
#26 |
|
Registered User
Join Date: Nov 2000
Location: Wheatfield IN, USA
Posts: 1,112
|
Re: Hydroboost / Power Steering cooler line routing
Can PTFE lined braided hose be acceptable for making these hydroboost / power steeering lines?? Looks like the operating pressure of the PTFE is 2000 psi and burst pressure is 6000 psi. Would be nice to build my own lines
Thoughts ? thanks
__________________
1972 K5 Build - plans - LS3-6L80e-One Tons..... 1971 CREWMAX Build.....at body shop for couple more years 
|
|
|
|
02-28-2023, 07:36 AM
|
#27 |
|
Senior Member
 Join Date: Jul 2015
Location: Warrenton VA
Posts: 1,039
|
Re: Hydroboost / Power Steering cooler line routing
I'd certainly give it a whirl, use quality line and fittings and I'm sure you'll have years of trouble free service. I used it for my fuel system and it's very nice to work with compared to the other braided lines.
__________________
71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
