Finally Finished my 462ci Build - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

62 short step · 11-10-2009, 11:58 AM

Looking good Vince!

joe231 · 11-10-2009, 12:35 PM

Very nice!!
Are there valve cover spacers on there, forgive my lack of knowledge

vin63 · 11-10-2009, 01:42 PM

Quote:

Originally Posted by 62 short step

Looking good Vince!

Thanks, Jeremy!

Quote:

Originally Posted by joe231

Very nice!!
Are there valve cover spacers on there, forgive my lack of knowledge

Good eye...yes, I'm running roller rockers and a stud girdle, so the stock height valve covers won't clear unless I run a spacer...or, a set of fabricated tall valve covers, but those are way too pricey.

joe231 · 11-10-2009, 03:47 PM

vin63 · 12-08-2009, 07:13 PM

here's the print out of the last pull...

Dustin07 · 12-08-2009, 07:22 PM

dude its hard to believe that anything is too pricey for that motor it looks like it is worth some gold. cool build man

vin63 · 12-08-2009, 07:41 PM

Quote:

Originally Posted by Dustin07

dude its hard to believe that anything is too pricey for that motor it looks like it is worth some gold. cool build man

Thanks! I have a total of $3K into it...I spent several years before the build up trading and swapping parts, and buying other people's used stuff.

ol Curt · 12-08-2009, 08:32 PM

Vin that is sweet! I can't wait for a video of it!

Dustin07 · 12-09-2009, 05:01 PM

Quote:

Originally Posted by vin63

Thanks! I have a total of $3K into it...I spent several years before the build up trading and swapping parts, and buying other people's used stuff.

not bad at all, i would have guessed much more

vin63 · 01-11-2010, 02:06 PM

After a few parts arrived after the New Year, the serpentine system is complete. I also was able to sneak in some time between family comittments to tack together my 3-inch downpipe that snakes around the frame on the passenger side...

DaddyMack · 01-11-2010, 02:54 PM

That's what I'm talking about!! hmmm I smell my next project...

Chvyman1975 · 01-22-2010, 03:29 PM

Quote:

Originally Posted by vin63

After a few parts arrived after the New Year, the serpentine system is complete. I also was able to sneak in some time between family comittments to tack together my 3-inch downpipe that snakes around the frame on the passenger side...

Ok Im picking up a 65 c10 this weekend. I am a Pontiac guy at heart. I have a Pro Street 70 bird in the garage as well as a few other Pontiacs. I was thinking about putting a Pontiac engine in the truck. Was it a hard thing to do?

vin63 · 01-22-2010, 06:12 PM

Quote:

Originally Posted by Chvyman1975

Ok Im picking up a 65 c10 this weekend. I am a Pontiac guy at heart. I have a Pro Street 70 bird in the garage as well as a few other Pontiacs. I was thinking about putting a Pontiac engine in the truck. Was it a hard thing to do?

It wasn't very difficult. Just kind of plan out how you want to do the block-to-frame mount, and you should be good to go. Let me know if you have any questions. Actually, my buddy, who I'm partners with in the blown Pontiac Nostalgia Funny Car runs a 455 Pontiac in his '68 C-30.

muddpile · 01-22-2010, 07:54 PM

I'm all about that Pontiac in there, as it's an odd thing to do, much like my Olds. I guess "odd" is kind of my thing...

Chvyman1975 · 01-22-2010, 09:57 PM

Well I have a 455 bare block here and a few extra parts in storage. Maybe I will give it the old effort.

Here is a video of my 70 Firebird

YouTube- Pontiac 006

vin63 · 01-22-2010, 10:33 PM

Very cool! That's how I ended up putting the Pontiac in my truck...I had a block, crank and a few other things laying around.

Here's my blown Pontiac AA/F Altered - soon to be nostalgia funny car:

http://www.youtube.com/watch?v=RL05g1uaNTk

http://www.youtube.com/watch?v=oCD2wZ-RnwI

Swerve-Driver · 01-23-2010, 12:24 AM

Cool engine build and Awesome Launch in the race. Made it look easy-
S-D

*vivisix* · 01-23-2010, 12:34 AM

great! I love this kinda stuff. I've got a 41 chevy 2door sedan I'm going to put a poncho 400 in. Fiberglass fenders, just under 3000lbs and over 400foot pounds. Should be nice.

cool truck!

11-10-2009, 11:58 AM	#26
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Finally Finished my 462ci Build Looking good Vince! __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

11-10-2009, 12:35 PM	#27
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Finally Finished my 462ci Build Very nice!! Are there valve cover spacers on there, forgive my lack of knowledge __________________ *CHEVY ONLY*

11-10-2009, 03:47 PM	#29
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Finally Finished my 462ci Build __________________ *CHEVY ONLY*

12-08-2009, 07:13 PM	#30
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,261	Re: Finally Finished my 462ci Build here's the print out of the last pull... __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

12-08-2009, 07:22 PM	#31
Dustin07 Stirrer of the Pot Join Date: Mar 2008 Location: washington Posts: 477	Re: Finally Finished my 462ci Build dude its hard to believe that anything is too pricey for that motor it looks like it is worth some gold. cool build man

12-08-2009, 08:32 PM	#33
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: Finally Finished my 462ci Build Vin that is sweet! I can't wait for a video of it! __________________ 1966 Chevy C10 Longbed I'm Bob....ol Curt was my Grandpa The truck was his and he sure as heck wouldn't understand why I took a perfectly good truck and tore it down!

01-11-2010, 02:06 PM	#35
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,261	Re: Finally Finished my 462ci Build After a few parts arrived after the New Year, the serpentine system is complete. I also was able to sneak in some time between family comittments to tack together my 3-inch downpipe that snakes around the frame on the passenger side... __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

01-11-2010, 02:54 PM	#36
DaddyMack Wide Eyed User Join Date: Mar 2008 Location: Las Vegas, Nevada Posts: 261	Re: Finally Finished my 462ci Build That's what I'm talking about!! hmmm I smell my next project... __________________ 1962 Chevy P/U SB Fleetside 350/350 2.5/5 static drop My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=294723 Final (as final can be ) Pics: http://67-72chevytrucks.com/vboard/s...d.php?t=393441

01-22-2010, 07:54 PM	#39
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Re: Finally Finished my 462ci Build I'm all about that Pontiac in there, as it's an odd thing to do, much like my Olds. I guess "odd" is kind of my thing... __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

01-23-2010, 12:24 AM	#42
Swerve-Driver Registered User Join Date: Aug 2006 Location: Chicago Posts: 38	Re: Finally Finished my 462ci Build Cool engine build and Awesome Launch in the race. Made it look easy- S-D

01-23-2010, 12:34 AM	#43
vivisix Account Suspended Join Date: Dec 2008 Location: omaha, ne Posts: 21	Re: Finally Finished my 462ci Build great! I love this kinda stuff. I've got a 41 chevy 2door sedan I'm going to put a poncho 400 in. Fiberglass fenders, just under 3000lbs and over 400foot pounds. Should be nice. cool truck!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.