I struck gold today!!!Ochre type anyway!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

krue · 05-07-2005, 03:42 PM

Woops, I didn't read any further when I saw the w/s frame. Put me second in line then.

*bisquik65* · 05-07-2005, 05:21 PM

Quote:

Originally Posted by krue

Woops, I didn't read any further when I saw the w/s frame. Put me second in line then.

Sure will put you 2nd on the w/s post/cowl Its not that bad. I would say way above avarage for one with that much rust!! I hope you can still take your top off!!!

*bisquik65* · 05-07-2005, 05:25 PM

Heres a progress pic or 2 or 3 ?

c-1072 · 05-07-2005, 05:34 PM

so wich blazer are you building ? it looks like you got three there . by the way got any good fuel tanks .

*bisquik65* · 05-07-2005, 05:39 PM

i have 2 blazers here both had bad tanks

but i have one under the k/20 that is good,thats all i have. the k/20 will be f/s soon,bare cab 8 foot bed 1/2 rears from the 72 k5 rolling and will post that when its ready...Clear 69 k/20 title goes with it..Cab has fuel hole smooth as the blazer tank goes under the bed..fill inside the bed,

*bisquik65* · 05-07-2005, 05:40 PM

Quote:

Originally Posted by c-1072

so wich blazer are you building ? it looks like you got three there . by the way got any good fuel tanks .

I think i have one,let me look again...

slamd58 · 05-08-2005, 02:48 PM

Do you have the inside trim pieces on the tailgate that hold the weather stripping on them. I need the bottom piece and the two side strips.

c-1072 · 05-08-2005, 09:33 PM

any luck on the windshield frame pics ? Even if you can just run by the cond of it for me i can tell you either way .rot or no rot rust is ok rot is not so good . Thanks

*bisquik65* · 05-09-2005, 07:54 AM

I will get pics today of the post,i have been out with kidney stones,talk about pain!!! I am felling better today,Didn't even go to the hospital,stayed right here on the couch all day...14 hours of pain!!!

but i feel great today

c-1072 · 05-09-2005, 04:25 PM

sorry to hear that got to give it to ya i would have gone and got some pills or something . do what you can when you can . Thanks

*bisquik65* · 05-09-2005, 05:08 PM

My dad went through this at 34,my brother went through it 3 years ago at 34,guess what i am 34 it was just my turn,he had pills left over so it saved a hugh hospital bill having no insurance

But i am doing fine now,fell better than ever!!

*bisquik65* · 05-09-2005, 05:24 PM

Progress picks

FRENCHBLUE72 · 05-09-2005, 09:40 PM

Looks like you got a few project's .. I don't know about that tub sitting on block's next to that pretty blazer though???

*bisquik65* · 05-11-2005, 10:14 AM

Quote:

Originally Posted by c-1072

any luck on the windshield frame pics ? Even if you can just run by the cond of it for me i can tell you either way .rot or no rot rust is ok rot is not so good . Thanks

I have decided to keep the post,i have 2 blazers now and a few more coming in..

*bisquik65* · 05-11-2005, 10:16 AM

Pic for Rod

*bisquik65* · 05-11-2005, 10:18 AM

Frame is now ready for the LT1 71 z28 350 /4 speed/rockwell case now..

sgrooms · 05-11-2005, 11:14 PM

If no one else cabbages on to that back seat, I would like a chance at it. I thought I read someone wanted it.

Rod · 05-11-2005, 11:22 PM

This is a pic of the last 2 pieces I wanted...can't see if there in that pic. Basically it's the outside edge support brackets for the front shocks.

Otherwise looks good check your PM.

*bisquik65* · 05-12-2005, 07:45 AM

I have one good one of those,one was tore off and welded back on... You can have that one also. I will send you pics of it all again here this afternoon,Thanks

MIDSTATE__67-72 · 05-12-2005, 03:50 PM

in a previous post you said this had the rear panels (cst model) in it, are they available? and also wanting to see a pic of the rear seat.....thanks....midstate

*bisquik65* · 05-12-2005, 04:43 PM

Quote:

Originally Posted by MIDSTATE__67-72

in a previous post you said this had the rear panels (cst model) in it, are they available? and also wanting to see a pic of the rear seat.....thanks....midstate

It had the side panels in it ,but not when i got it.. Tub was stripped all but the seats..

*bisquik65* · 05-12-2005, 07:07 PM

Motor/trans/case/front drive shaft on the frame today...

*bisquik65* · 05-28-2005, 06:24 PM

The body is going back on the frame tomorrow...Pics of it too.

*bisquik65* · 07-04-2005, 04:24 PM

More progress pics...

LUV2XCLR8 · 07-04-2005, 04:39 PM

LIKE THE HALF CAB

05-07-2005, 03:42 PM	#26
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Woops, I didn't read any further when I saw the w/s frame. Put me second in line then. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

05-07-2005, 05:25 PM	#28
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Heres a progress pic or 2 or 3 ? Attached Images

05-07-2005, 05:34 PM	#29
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	blazer so wich blazer are you building ? it looks like you got three there . by the way got any good fuel tanks .

05-08-2005, 02:48 PM	#32
slamd58 <- Determination Pays Off Join Date: Dec 2004 Location: Klamath Falls, OR Posts: 77	Do you have the inside trim pieces on the tailgate that hold the weather stripping on them. I need the bottom piece and the two side strips. __________________ 1958 Chevy Pickup 350/350, PS, PB, Tilt, A/C, 4 wheels Discs, 17" Wheels. Full Leather Interior - SOLD 1972 CST Blazer 454/400, A/C, 4" lift, 35's, Double wall top

05-08-2005, 09:33 PM	#33
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	any pics ? any luck on the windshield frame pics ? Even if you can just run by the cond of it for me i can tell you either way .rot or no rot rust is ok rot is not so good . Thanks

05-07-2005, 05:39 PM	#30
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	i have 2 blazers here both had bad tanks but i have one under the k/20 that is good,thats all i have. the k/20 will be f/s soon,bare cab 8 foot bed 1/2 rears from the 72 k5 rolling and will post that when its ready...Clear 69 k/20 title goes with it..Cab has fuel hole smooth as the blazer tank goes under the bed..fill inside the bed,

05-09-2005, 07:54 AM	#34
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I will get pics today of the post,i have been out with kidney stones,talk about pain!!! I am felling better today,Didn't even go to the hospital,stayed right here on the couch all day...14 hours of pain!!! but i feel great today

05-09-2005, 04:25 PM	#35
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	ouch sorry to hear that got to give it to ya i would have gone and got some pills or something . do what you can when you can . Thanks

05-09-2005, 05:08 PM	#36
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	My dad went through this at 34,my brother went through it 3 years ago at 34,guess what i am 34 it was just my turn,he had pills left over so it saved a hugh hospital bill having no insurance But i am doing fine now,fell better than ever!!

05-09-2005, 05:24 PM	#37
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Progress picks Attached Images

05-09-2005, 09:40 PM	#38
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Looks like you got a few project's .. I don't know about that tub sitting on block's next to that pretty blazer though??? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-11-2005, 10:16 AM	#40
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Pic for Rod Attached Images

05-11-2005, 10:18 AM	#41
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Frame is now ready for the LT1 71 z28 350 /4 speed/rockwell case now.. Attached Images

05-11-2005, 11:14 PM	#42
sgrooms Registered User Join Date: Apr 2003 Location: Princeton, MO Posts: 23	If no one else cabbages on to that back seat, I would like a chance at it. I thought I read someone wanted it.

05-11-2005, 11:22 PM	#43
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	This is a pic of the last 2 pieces I wanted...can't see if there in that pic. Basically it's the outside edge support brackets for the front shocks. Otherwise looks good check your PM. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.



Register or Log In To remove these advertisements.

05-12-2005, 07:45 AM	#44
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I have one good one of those,one was tore off and welded back on... You can have that one also. I will send you pics of it all again here this afternoon,Thanks

05-12-2005, 03:50 PM	#45
MIDSTATE__67-72 Senior Member Join Date: Oct 2004 Location: decatur, il Posts: 199	rear sadlle interior panels, rear seat in a previous post you said this had the rear panels (cst model) in it, are they available? and also wanting to see a pic of the rear seat.....thanks....midstate

05-12-2005, 07:07 PM	#47
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Motor/trans/case/front drive shaft on the frame today... Attached Images

05-28-2005, 06:24 PM	#48
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	The body is going back on the frame tomorrow...Pics of it too.

07-04-2005, 04:24 PM	#49
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	More progress pics... Attached Images

07-04-2005, 04:39 PM	#50
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	LIKE THE HALF CAB __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

Register or Log In To remove these advertisements.