I struck gold today!!!Ochre type anyway!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*bisquik65* · 05-06-2005, 01:20 PM

This was chrusher bound and just happened to ride by before it got there...Its home now!!!!

bouncytruck · 05-06-2005, 01:29 PM

Wow! What's your plans? What did they do to bend the bed sides out like that?

If you want to sell that rear hatch, let me know.

*Medicanman71* · 05-06-2005, 03:06 PM

oooh if ya want to sell the rear hatch ,let me know

Every ones going to be after that latch T handle deal on it..., good eye bouncy

oooops , i've gone and let the cat out'a the bag

But what did happen to it? Was it WAY over loaded

:mp: <-

Swbman · 05-06-2005, 03:59 PM

Looks like Gold to me,it that a 3/4 ton burb cant tell much from the angle of the pictures.

*bisquik65* · 05-06-2005, 04:36 PM

I am building a 70 4x4 and need a frame,Here it is...And parts for blazer don't hurt to be around...The hatch will be for parts after i get my blazer done i will post whats left for all to see...It had the rear panels in it,CST 72 model..It has lots of goddies in it too.. The top came off like that when he loaded it on the trailer..I went there and asked what he was going to do with it? He said why would you want that pile of junk...Man i gave him scrap price for it..And got the frame i need...And a few more things..rear seat..seatbelts.ect... I will post what i have left over soon....Thanks,Erick

LUV2XCLR8 · 05-06-2005, 05:38 PM

*bisquik65* · 05-06-2005, 06:39 PM

Talk about rusty!!!! This thing just fell apart...But i have a top and frame i need along with some good patches here and there...

*bisquik65* · 05-06-2005, 06:56 PM

Quote:

Originally Posted by bouncytruck

Wow! What's your plans? What did they do to bend the bed sides out like that?

If you want to sell that rear hatch, let me know.

RUST !!!!!!!and lot of it

bouncytruck · 05-06-2005, 07:12 PM

Dang, you made quick work of tearing that apart - I guess mother nature helped you a little.

*bisquik65* · 05-06-2005, 07:21 PM

The K/20 rears are getting bolted on the blasted and painted blazer frame tomorrow,then motor/trans/case get bolted on it tomorrow,Then its body time!!!! It will run in a few weeks time ...

Big Block · 05-06-2005, 07:23 PM

I know most people hate that color but it's kinda grown on me. Seems like you're digging up all kinds of treasures up in them there mountains. B.B.

*bisquik65* · 05-06-2005, 08:30 PM

Don't worry ,i am not junking the windshield/cowl piece i cut off,It not in bad shape at all.. Someone out there will need it one day...

c-1072 · 05-06-2005, 09:13 PM

If that frame is solid and you want to sell it pm me your # an we can work a deal .

*bisquik65* · 05-06-2005, 09:26 PM

I need the frame for this one that was stuck in the mud and they did this pulling it out I know where 3 more are sitting ,working on getting them too.

c-1072 · 05-06-2005, 09:41 PM

No actualy i was refering to the frame that holds the windshield , i think you called it the cowl area .

*bisquik65* · 05-06-2005, 09:47 PM

Yes i did see that when a posted the pics. I will get more pics of the windshield frame tomorrow.

c-1072 · 05-06-2005, 09:49 PM

GREAT thanks just pics of any rust problems ,real close pics if you can thanks again .
Todd

*bisquik65* · 05-06-2005, 09:55 PM

Will do,check here tomorrow eav..Thanks,Erick

teamradrz1 · 05-06-2005, 11:59 PM

I'm still looking for a good deal on front bumper brackets and rear inner brackets, any chance that beast have any you won't be needing? Let me know Thanks,
James

MIDSTATE__67-72 · 05-07-2005, 11:55 AM

let me know if you have any saddle color interior pieces left over...needing rear interior panels, rear seat, and console lid

Rod · 05-07-2005, 02:02 PM

I still haven't closed any deal on a set of frame brackets for the front springs on a 4x4.....need pretty much all to covert a 2wd to 4 wd or just the front rad cradle / front spring brackets. I'm no hurry, but just note that thats useful stuff to me also. The rubber stopper mounts above axle attached to frame and the front shock upper support bracket off the frame also.

*bisquik65* · 05-07-2005, 03:10 PM

Quote:

Originally Posted by teamradrz1

I'm still looking for a good deal on front bumper brackets and rear inner brackets, any chance that beast have any you won't be needing? Let me know Thanks,
James

I will have to see whats left over before i commit ..Just check back..thanks,Erick

*bisquik65* · 05-07-2005, 03:12 PM

Quote:

Originally Posted by MIDSTATE__67-72

let me know if you have any saddle color interior pieces left over...needing rear interior panels, rear seat, and console lid

It did have saddle interior,the side panels were not in it. The rear seat is there,i will get pics of it.no console .. thanks,Erick

*bisquik65* · 05-07-2005, 03:13 PM

Quote:

Originally Posted by Rod

I still haven't closed any deal on a set of frame brackets for the front springs on a 4x4.....need pretty much all to covert a 2wd to 4 wd or just the front rad cradle / front spring brackets. I'm no hurry, but just note that thats useful stuff to me also. The rubber stopper mounts above axle attached to frame and the front shock upper support bracket off the frame also.

I will have some stuff left off the bent frame..soon,i will take pics of what all thats left,thanks ,Erick

krue · 05-07-2005, 03:40 PM

Quote:

Originally Posted by bisquik65

Don't worry ,i am not junking the windshield/cowl piece i cut off,It not in bad shape at all.. Someone out there will need it one day...

Yeah, like me! Let me know when you decide to get rid of it. All I really need is the windshield frame (I am gonna try using my p/u cab to patch my blazer).

05-06-2005, 01:20 PM	#1
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I struck gold today!!!Ochre type anyway!!! This was chrusher bound and just happened to ride by before it got there...Its home now!!!! Attached Images

05-06-2005, 01:29 PM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Wow! What's your plans? What did they do to bend the bed sides out like that? If you want to sell that rear hatch, let me know. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

05-06-2005, 03:06 PM	#3
Medicanman71 Account Suspended Join Date: May 2005 Location: Where the Wild Things Are Posts: 696	oooh if ya want to sell the rear hatch ,let me know Every ones going to be after that latch T handle deal on it..., good eye bouncy oooops , i've gone and let the cat out'a the bag But what did happen to it? Was it WAY over loaded :mp: <- Last edited by Medicanman71; 05-06-2005 at 03:12 PM.

05-06-2005, 03:59 PM	#4
Swbman Senior Member Join Date: Mar 2004 Location: Tulsa,Oklahoma Posts: 606	Looks like Gold to me,it that a 3/4 ton burb cant tell much from the angle of the pictures. __________________ 1961 BUICK LESABRE 1968 CHEVELLE SS 396 1969 BUICK RIVIERA GS 1971 2 WHEEL DRIVE BLAZER 1971 4X4 BLAZER 1971 SHORTBED CHEYENNE FLEETSIDE 1971 SHORTBED 4X4 FLEETSIDE ** ...My Ebay

05-06-2005, 05:38 PM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	__________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-06-2005, 04:36 PM	#5
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I am building a 70 4x4 and need a frame,Here it is...And parts for blazer don't hurt to be around...The hatch will be for parts after i get my blazer done i will post whats left for all to see...It had the rear panels in it,CST 72 model..It has lots of goddies in it too.. The top came off like that when he loaded it on the trailer..I went there and asked what he was going to do with it? He said why would you want that pile of junk...Man i gave him scrap price for it..And got the frame i need...And a few more things..rear seat..seatbelts.ect... I will post what i have left over soon....Thanks,Erick

05-06-2005, 06:39 PM	#7
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Talk about rusty!!!! This thing just fell apart...But i have a top and frame i need along with some good patches here and there... Attached Images

05-06-2005, 07:12 PM	#9
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Dang, you made quick work of tearing that apart - I guess mother nature helped you a little. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

05-06-2005, 07:21 PM	#10
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	The K/20 rears are getting bolted on the blasted and painted blazer frame tomorrow,then motor/trans/case get bolted on it tomorrow,Then its body time!!!! It will run in a few weeks time ...

05-06-2005, 07:23 PM	#11
Big Block Big Block Join Date: Mar 2005 Location: Durham, N.C. Posts: 1,649	I know most people hate that color but it's kinda grown on me. Seems like you're digging up all kinds of treasures up in them there mountains. B.B.

05-06-2005, 08:30 PM	#12
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Don't worry ,i am not junking the windshield/cowl piece i cut off,It not in bad shape at all.. Someone out there will need it one day...

05-06-2005, 09:13 PM	#13
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	windshield frame If that frame is solid and you want to sell it pm me your # an we can work a deal .

05-06-2005, 09:26 PM	#14
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I need the frame for this one that was stuck in the mud and they did this pulling it out I know where 3 more are sitting ,working on getting them too. Attached Images

05-06-2005, 09:41 PM	#15
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	windshield No actualy i was refering to the frame that holds the windshield , i think you called it the cowl area .

05-06-2005, 09:47 PM	#16
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Yes i did see that when a posted the pics. I will get more pics of the windshield frame tomorrow.



Register or Log In To remove these advertisements.

05-06-2005, 09:49 PM	#17
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	GREAT thanks just pics of any rust problems ,real close pics if you can thanks again . Todd

05-06-2005, 09:55 PM	#18
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Will do,check here tomorrow eav..Thanks,Erick

05-06-2005, 11:59 PM	#19
teamradrz1 Registered User Join Date: Apr 2005 Location: Gresham, OR 97080 Posts: 499	I'm still looking for a good deal on front bumper brackets and rear inner brackets, any chance that beast have any you won't be needing? Let me know Thanks, James __________________ 1971 Chevy Blazer CST 4X4 2012 Camaro 2SS/RS 2007 Avalanche 4X4

05-07-2005, 11:55 AM	#20
MIDSTATE__67-72 Senior Member Join Date: Oct 2004 Location: decatur, il Posts: 199	tan/brown interior parts let me know if you have any saddle color interior pieces left over...needing rear interior panels, rear seat, and console lid

05-07-2005, 02:02 PM	#21
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	I still haven't closed any deal on a set of frame brackets for the front springs on a 4x4.....need pretty much all to covert a 2wd to 4 wd or just the front rad cradle / front spring brackets. I'm no hurry, but just note that thats useful stuff to me also. The rubber stopper mounts above axle attached to frame and the front shock upper support bracket off the frame also.

Register or Log In To remove these advertisements.